Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in San Francisco: What the Job Actually Involves
Vanities, tile and fixtures work in San Francisco typically runs $10,620 – $33,040 for a full room’s worth of finish work, and most rooms take two to four weeks from demo to final grout. That covers the vanity and top, floor and wall tile, the shower or tub trim, faucets, drains, lighting and mirrors. The number moves on square footage, tile grade, and whether plumbing or electrical has to move. Call (833) 997-7759 for a free on-site estimate with a line-item quote.
How We Run a Vanity, Tile & Fixture Job, Stage by Stage
Finish work is where budgets quietly die, so we sequence it tightly and tell you what you’re deciding at every step. Here’s the actual order.
Stage 1: Measure, tear-out and substrate check (day 1 – 2)
We pull the old vanity, toilet and tile, then open the wall behind it. This is the hour that decides everything: water damage behind a 1920s tub surround in the Haight is common, and rotten subfloor or a soft joist gets priced before we go further, not after. You approve any hidden-damage line item in writing before work continues.
Stage 2: Rough-in and substrate (day 2 – 5)
If the vanity is moving or growing, the drain and supply lines get relocated and the electrical for sconces and a GFCI outlet gets run. Then cement backer board goes down and up, with waterproofing membrane in the wet zone. You’ve already picked the tile by now, because layout and thickness affect how the substrate is set.
Stage 3: Tile layout and setting (day 5 – 12)
We dry-lay the floor first and show you where cuts land before a single tile is set. Large-format porcelain over a small Victorian floor needs a flatness check; a hex mosaic in a 1910 Noe Valley bathroom needs a careful pattern start. Setting, drying and grouting usually eats five to seven working days for an average room.
Stage 4: Vanity, top and fixtures (day 12 – 16)
The vanity gets set and shimmed level, the top goes on, then the faucet, drain, P-trap and shutoffs. Mirror, sconces, exhaust fan and any glass go in after the tile is fully cured. You make the final call on fixture finish here if you haven’t already – and that decision is best made before the tile order, not after.
Stage 5: Punch list and walkthrough (day 16 – 20)
We re-caulk every wet joint, test every drain for flow, check the fan actually vents outside, and walk the room with you. Anything on your list gets fixed before final payment. The whole job carries our 730-Day Done Right Promise – if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the budget swings on five decisions. Here’s the honest trade-off on each.
- Vanity body: Stock cabinets are fast and cheap but rarely fit an odd San Francisco wall; semi-custom plywood boxes are the sweet spot; full custom buys you exact fit in a narrow Victorian bath at a real premium. KraftMaid and Kohler are the names we specify most.
- Vanity top: Quartz is the default for good reason – no sealing, resists the damp. Marble looks incredible and etches from toothpaste and hard water. Cultured marble is the budget play and shows wear fastest.
- Floor tile: Porcelain is durable, affordable and handles moisture. Natural stone (travertine, slate) needs sealing and re-sealing in our coastal air. Heated floor mats are a small add that matters in a fog-cooled flat.
- Wall tile: Full-height tile behind the vanity protects the wall from splash and looks sharp; a half-wall wainscot plus paint costs less but needs repainting on a schedule.
- Fixtures: Big-box chrome is fine; a solid-brass or PVD-finish faucet holds its finish far longer in salt air. Spend on the valve and drain you’ll never see – that’s where leaks start.
What Vanities, Tile & Fixtures Costs in San Francisco, CA
Expect $10,620 – $33,040 for the full scope, with a vanity-only swap landing near $945 – $3,540. A written estimate breaks out demo, substrate and waterproofing, tile by the square foot, the vanity and top, fixtures, labor and permit fees. What pushes a job toward the top of that range:
- Room size and tile area – more square feet, more setting time, more material.
- Existing condition – hidden rot, failed subfloor or old galvanized supply lines add real money.
- Moving plumbing or electrical – relocating a drain is the single biggest swing item.
- Material grade – natural stone and custom cabinetry versus porcelain and semi-custom.
- Permit scope – moving a wall or adding a vent triggers inspection; a simple finish swap often doesn’t.
Our pricing is upfront – the number you see is the number you pay, no change orders for work we scoped. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (833) 997-7759 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
The housing stock here changes the work more than any other factor. We’re usually inside 1880s – 1920s wood-frame Victorians and Edwardians in the Mission, Noe Valley and the Haight – narrow lots, unreinforced brick chimneys, and soft first-story garages. That means a “simple” vanity swap often reveals out-of-square walls and a floor that needs sistered joists, and tile layout has to be planned around a room that isn’t truly rectangular. Because the city enforces the strictest seismic retrofit mandate in the country (Soft-Story and UMB ordinances), any work touching a soft-story wall needs coordination with a structural upgrade. The Planning Department’s historic-review triggers can add months to a change that in Daly City would be a routine permit. And the damp winters mean we schedule tile setting and grout around moisture, not heat. Most jobs in San Francisco finish in a single visit pattern with the right prep.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in San Francisco
Most rooms take two to four weeks from demo to walkthrough, with a vanity-only swap possible in one to three days. Timelines stretch when plumbing moves or hidden damage turns up, which is why we scope the substrate on day one. Call (833) 997-7759 to get a schedule for your room.
Finish-only work usually doesn’t need a permit; moving plumbing, adding an electrical circuit, or altering structure does. The Soft-Story rules add coordination if your wall is part of the retrofit scope. We pull the permits and pass the inspections. Call (833) 997-7759 and we’ll tell you exactly what your job needs.
Yes – keeping the drain and supply lines where they are is the fastest, most affordable path. You still choose the vanity, tile and fixtures, and we re-set the drain and supply for the new vanity so it all lines up. Call (833) 997-7759 to plan a stay-in-place layout.
A vanity-only replacement in San Francisco runs about $945 – $3,540, fixtures and top included. Tile work pushes the number up from there. Call (833) 997-7759 for an exact quote; estimates are free.
Every job is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right. Our technicians have up to 12 years of experience, are background-checked and arrive in uniform. Call (833) 997-7759 with any warranty question.
If the vanity, tile and fixtures are part of a larger overhaul, homeowners often pair this with a full Bathroom Remodeling in San Francisco project, or with Tile Roofing in San Francisco and Specialty Roofing in San Francisco when storm damage hits the same season. Our bathroom remodeling service covers the full scope, and we serve all of San Francisco.
Get a Free Estimate for Vanities, Tile & Fixtures in San Francisco
Call (833) 997-7759 and a live person answers, day or night. We’ll ask about your room, your tile and vanity leans, and schedule a free on-site estimate. You’ll get a written, line-item quote with a fixed price – the number you see is the number you pay – so you can compare apples to apples before you commit. No pressure, no hidden fees, no surprises.
Written by the team at Groundwork Construction Co.