Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Daly City, CA: What the Job Actually Involves
A vanity, tile, and fixture update in Daly City generally runs $9,000 – $28,000 depending on how much tile you replace and whether plumbing or electrical has to move. A single-vanity swap with a new floor and a fixture refresh takes about 2 – 4 days on site; a full floor-to-ceiling tile job with a relocated vanity and new lighting takes 8 – 14 working days. Call (833) 997-7759 and we’ll price your specific bathroom, free.
Vanities, Tile & Fixtures is the layer of a bathroom people actually see and touch every day: the cabinet and counter, the floor and wall tile, the faucet, shower trim, lighting and mirror. It’s the work that changes how a room looks and functions without tearing into the whole layout.
What the process looks like, day by day
This isn’t a “we handle everything” job where you disappear for two weeks and hope. You’re making decisions at set points, and here’s where they land.
Stage 1: Measure, template and settle the layout (day 1)
We pull real measurements of the room, check that the floor is flat and the walls are plumb, and confirm where the drain and supply lines sit. That’s when we find out whether your new vanity fits the existing plumbing or needs a small rough-in move. You decide the vanity width and whether the sink stays centered or shifts. Allow half a day. If the subfloor is soft from old moisture, this is the day we catch it, not day five.
Stage 2: Demo and substrate prep (days 2 – 3)
Old tile, vanity and trim come out. Then the important part: cement backer board on the floor and any tiled wall, waterproofing membrane in wet zones, and leveling compound where the floor dips. This is the stage that decides whether the tile lasts twenty years or cracks in two. You don’t have to make decisions here, but it’s the right moment to ask questions about what’s behind the wall.
Stage 3: Tile setting (days 3 – 6)
Floor tile goes down first, then wall and shower tile, with grout and caulk following after the thinset cures. You’ll have chosen tile size, layout and grout color beforehand – we’ll walk you through pattern options and where to start the first course so the cuts land in the least visible corners. Large-format 24×24 porcelain takes longer to set than 3×6 subway and needs a flatter substrate; we’ll tell you which your floor can take.
Stage 4: Vanity, counter and fixtures (days 6 – 9)
The vanity cabinet gets set and shimmed level, the counter templated or fit, the sink and faucet tied in, and the shower valve trim, head, mirror and lighting installed. You’re choosing counter material and edge profile at the start of this stage. If you want an electrical outlet moved for a lighted mirror, that happens here and adds a day.
Stage 5: Grout, caulk, punch list (days 9 – 14)
Final grout sealing, caulk lines, a full water test on every drain and supply, and a walkthrough where you mark anything that isn’t right. We fix it before we leave, and the work is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the money and most of the regret live in these choices. Here’s the honest version of each.
- Vanity cabinet: Stock particleboard units are cheap but swell when they get wet; plywood-box or solid-wood cabinets (we work with KraftMaid among others) cost more and hold up for decades in a damp room. In Daly City’s fog belt, we lean plywood every time.
- Counter: Quartz and Cambria-style surfaces resist moisture and staining and need no sealing; natural stone looks richer but wants resealing yearly; laminate is the budget pick and the first thing to fail around the sink.
- Floor tile: Porcelain is dense, water-resistant and the default for good reason. Natural stone (travertine, slate) is beautiful and slippery when wet; it also needs sealing. Larger tiles mean fewer grout lines to clean.
- Shower wall tile: Ceramic and porcelain are easy to maintain; glass mosaic is stunning and grout-heavy. Whatever you pick, the waterproofing behind it matters more than the tile itself.
- Fixtures and finish: Brushed nickel and matte black hide water spots better than polished chrome. Kohler and similar brands give you parts availability ten years out; off-brand faucets are the thing you end up replacing first.
- Mirror and lighting: A standard mirror plus a vanity bar is the simple route; a lighted mirror with a defogger costs more and needs an outlet, but it’s the upgrade people notice.
What Vanities, Tile & Fixtures costs in Daly City, CA
Plan on $9,000 – $28,000 for the full job. Here’s how the line items break down, and what pushes a project to the low or high end.
| Line item | Typical range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Tile floor and wall work | $3,000 – $9,000 |
| Fixture replacement (faucet, shower trim, lighting, mirror) | $1,000 – $3,500 |
| Waterproofing and substrate prep | $800 – $2,500 |
The variables that move the number:
- Square footage and tile coverage: a 40 sq ft powder room versus a 90 sq ft hall bath changes material and labor directly.
- Existing condition: soft subfloor, dry-rot or a failed old shower pan adds demo and rebuild time.
- Relocating plumbing or electrical: moving a drain or adding a circuit means rough-in work and often a permit.
- Material grade: stock vanity and ceramic versus a custom cabinet and porcelain large-format.
- Permit scope: like-for-like fixture swaps often don’t need one; relocating plumbing or adding electrical usually does.
Your written estimate lists what’s included – demo, materials, waterproofing, installation, cleanup – and what isn’t, like structural repair if we open a wall and find rot. Upfront pricing means the number you see is the number you pay, no change-order surprises. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
This is where a general playbook falls apart. Daly City sits on wind-blown sand and steep fog-belt slopes below San Bruno Mountain, and that shows up in the bathroom. On the hillside streets above the Mission Street corridor, we routinely open a wall and find sandy fill under a shallow original slab, so tile has to go over a properly prepped and decoupled substrate or it telegraphs every shift. The persistent Pacific fog keeps west-side homes in Westlake and Serramonte damp with little sun to dry surfaces, and that moisture works on the wall behind the tile long before you see it – we’ve pulled vanities in 1950s stucco-over-frame homes where the cabinet back was soft from years of trapped damp. Fixtures and vanities here need to tolerate humidity that never really leaves. Tile selection runs through licensed contractors pulling the right permits for any plumbing or electrical change, and the work is inspected against current code. If your project widens into a full Bathroom Remodeling in Daly City, we handle that scope too. We work all four ZIPs here – 94014, 94015, 94016 and 94017 – and the whole Daly City area, with the wider project covered under our Bathroom Remodeling service.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Daly City
A single-vanity swap with a new floor and fixtures takes 2 – 4 days; a full tile job with a relocated vanity and new lighting takes 8 – 14 working days. Bathroom Remodeling in Daly City timelines run longer when the layout changes. Call (833) 997-7759 for a schedule based on your bathroom.
Not for a straight swap of a vanity, faucet, tile or light in the same location. Moving a drain, adding a circuit or relocating plumbing usually requires a permit and inspection. We’ll tell you up front which applies and handle the paperwork.
Yes, and most of our Daly City jobs stay exactly where the existing fixtures sit. Keeping the drain and supply locations means less rough-in, no permit in most cases, and a shorter timeline. We measure first and tell you honestly if a move is worth it.
Most jobs land between $9,000 and $28,000, with a vanity installation alone at $800 – $3,000 and tile work at $3,000 – $9,000. Material grade, square footage and any plumbing or electrical moves are what shift the total. Call (833) 997-7759 for a free written estimate.
Every job is backed by our 730-Day Done Right Promise – if something isn’t done right, we make it right. That covers workmanship on tile, vanity setting, waterproofing and fixture installation. Estimates are free and the pricing is written before we start.
Get a free estimate for Vanities, Tile & Fixtures in Daly City
We’ll come out, measure the room, check the substrate and the plumbing, and hand you a written, line-item estimate for Vanities, Tile & Fixtures in Daly City – no pressure, no vague numbers. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. Call (833) 997-7759 to schedule yours.
Written by the team at Groundwork Construction Co.