Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in San Francisco: What You’re Actually Buying
Impact garage doors in San Francisco typically run $4,000 to $9,500 installed, and a straight single-car swap is usually a two-day job from demo to final adjust. The number swings on door size, wind-load rating, and whether the opening has to be reframed to meet current code. Both the door and the opener are part of a system that has to work together, and on this fog belt that system gets tested. Call (833) 997-7759 for a free on-site estimate.
Why coastal air eats garage hardware here first
The failure we see most on San Francisco garage doors isn’t the panel. It’s what holds the panel up. Salt-laden fog rolls through the Sunset and Richmond districts and settles into the dark, unheated space above a garage, and that damp air attacks bare steel springs, hinges, roller stems, and the fasteners that tie the track to the jamb. Inland homeowners get fifteen or twenty years out of a torsion spring. Here, uncoated springs often start sagging or snap in year six to nine.
What goes next, in rough order: the bottom hinges and their screws (the ones closest to the wet slab and the street spray), the opener chain or belt, then the track fasteners where galvanized lag bolts rust into old fir. We spec galvanized or powder-coated torsion springs, stainless hinges and fasteners, and sealed nylon rollers instead of steel. It’s a small upcharge on the front end and it’s the difference between a door that lasts and a repair every other spring.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The process, start to finish
Day 1 – measure and assess. We measure the rough opening, check the header for sag, and look at whether the existing track is plumb and square. On Victorians and Edwardians in the Mission and Noe Valley we often find the opening has settled out of square over a century, and that changes the door spec. You decide the material and finish at this stage.
Day 1-2 – permit and order. If the job touches structure or the opening needs reframing, we pull the permit and order the door to spec. Lead time on a custom impact door is typically three to seven weeks. We give you the exact date in the written estimate.
Day 3 – demo and prep. Old door and hardware come out, the opening gets cleaned, reframed if needed, and sealed against moisture. One day.
Day 3 – install and balance. New track, springs, and door go in, then the torsion gets balanced so the door lifts with two fingers. We test the opener, safety reverse, and photo-eye. Half a day to a full day depending on opener work.
Day 4 – inspection and walkthrough. Permit inspection if scheduled, then a walkthrough where you run the door yourself and we hand over the warranty paperwork. The 730-Day Done Right Promise covers the install, and if anything’s off we come back and make it right.
The options you’ll choose between
- Steel, insulated – the most common pick. Holds up well, decent R-value, and takes a factory finish. The trade-off is the panel dents before it rusts, and the interior finish is basic.
- Aluminum and glass – modern look, good for a street-facing garage on a remodeled Edwardian. Costs more, and the glass has to be impact-rated to match the door spec or it’s a weak point.
- Wood and composite – matches the historic façade on a Noe Valley or Haight Victorian. Real wood needs refinishing every few years in this climate; composite costs more up front but holds finish longer.
- Wind-load rating – impact doors are rated for wind pressure. Coastal exposure near Twin Peaks or the Great Highway pushes you to a higher rating, and that adds to the price.
We keep KraftMaid-style finish options and brands like Wellborn and Cambria in play across the wider remodel, but for the door itself the finish is what you’ll live with, so we bring samples to the estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Impact Garage Doors cost in San Francisco, CA
Expect $4,000 to $9,500 installed for a standard impact door, with a double-car or custom opening running higher. The low end is a stock-size steel door with a basic opener; the high end is a custom size, higher wind rating, and full opener replacement. Our estimate is upfront and itemized – the number you see is the number you pay.
What moves it: door size and number of cars; existing condition of the opening (settled header, out-of-square framing); whether an opener and wiring need replacement; material grade and finish; and permit scope. A reframe on an old Victorian adds the most.
What’s included: door, track, springs, hardware, install, balancing, and cleanup. What’s often extra: opener replacement, reframing, and any finish work on the surrounding façade. Call (833) 997-7759 for an exact quote – estimates are free.
What San Francisco homes specifically do to this job
Most of the garages we work on sit under 1880s-1920s wood-frame Victorians and Edwardians packed shoulder-to-shoulder on narrow lots. The soft-story retrofit mandate means the garage framing has often been reinforced, and that changes how we anchor the door track. And because the Planning Department’s historic-review triggers can add months to a job, we flag early whether your door change needs review before we order anything. In the Sunset and Richmond, the fog line decides your install date as much as the calendar does. If you’re pairing this with exterior work, homeowners often pair it with Paver Driveways in San Francisco or Concrete Driveways & Concrete Work in San Francisco. This job is part of a full Windows & Doors in San Francisco scope, and we cover all of San Francisco for it. Our technicians have up to 12 years of experience, and we run our Windows & Doors work across the city’s ZIP codes 94142, 94144, 94145, and 94146.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Impact Garage Doors in San Francisco
Most installs run two to four days on site, with three to seven weeks of lead time before that for a custom door. A stock-size door can go in faster. Call (833) 997-7759 for a firm timeline on your opening.
Yes if the opening is reframed or structure changes; a straight door swap on an existing opening often doesn’t. We pull the permit and handle inspection as part of the job. Call (833) 997-7759 and we’ll tell you which case yours is.
Usually yes if the existing opening is square and the springs and track are plumb. Settled headers on older Victorians are the main exception. We measure and tell you up front. Call (833) 997-7759 for a free on-site check.
They run $4,000 to $9,500 installed, with a higher wind rating or custom size pushing it up. Call (833) 997-7759 for an itemized quote – estimates are free.
Every install is backed by the 730-Day Done Right Promise, and the door and hardware carry their own manufacturer coverage. The breakdown goes in your written estimate. Call (833) 997-7759 to schedule.
Get a free impact garage door estimate
We’ll come out, measure the opening, check the framing, and give you a written line-item quote with lead times and permit scope spelled out. No change orders, no surprises. Call (833) 997-7759 to schedule your free estimate for Impact Garage Doors in San Francisco – a live person answers 24/7, and there’s 0% financing for 18 months plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Oakland.