Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Design & Permitting in San Francisco: What It Takes and What It Costs
ADU design & permitting in San Francisco runs $53,100 – $153,400 for the design-and-permit scope alone, and getting through the city’s review process usually takes 6 – 12 months before a shovel hits the ground. That number covers architectural drawings, structural engineering, Planning Department review, and building permits. Call (833) 997-7759 to schedule a free on-site estimate and get a real scope for your lot.
How ADU Design & Permitting Actually Moves, Stage by Stage
People assume design is the hard part. In San Francisco, it isn’t. The hard part is the review queue. Here’s the sequence we run.
Stage 1: Site Assessment and Feasibility (Week 1 – 2)
We walk the property, measure the lot, pull the zoning designation, and check whether your parcel sits inside a historic district or a Special Use District. On a narrow Mission District lot, this walk is where we find out whether the rear yard setback leaves you eight feet of buildable width or twenty. You decide at this point whether the ADU goes above a detached garage, into an existing first floor, or onto open rear yard. Feasibility determines everything downstream.
Stage 2: Schematic Design and Budget Alignment (Weeks 3 – 6)
Our design team produces concept drawings: floor plan, elevations, roof plan. We sit with you and price three versions, not one, because a 600-square-foot ADU and a 900-square-foot ADU differ by roughly $50,000 in construction cost alone. You choose the scheme, the finish level, and the exterior material (stucco, James Hardie siding, or a compatibility match to the main house). This is also the point where you commit to an electrical service upgrade or decide to work within the existing 100-amp panel. Deciding that later costs more.
Stage 3: Construction Documents and Engineering (Weeks 7 – 12)
Structural engineering, Title 24 energy calcs, and full architectural drawing sets get assembled here. San Francisco requires a licensed architect or engineer’s stamp on most ADU submittals, and if the property is a soft-story building, the structural drawings have to satisfy the retrofit ordinance at the same time. You review the final plans and sign off before anything is filed.
Stage 4: Permit Submittal and Planning Review (Months 4 – 9)
We file with the Department of Building Inspection, route through Planning if the project triggers discretionary review, and respond to plan-check comments. On a property in a historic district, Planning review can add another two to three months. We handle the counter visits and comment letters. You mostly wait, and we keep you updated on where the file sits.
Stage 5: Permit Issuance and Pre-Construction (Months 9 – 12)
Once the permit issues, we line up the build. You confirm the construction start window, finalize finishes if the ADU is part of a full home expansion, and sign the construction agreement. This stage is short. The one before it is not.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Design and Specification Choices That Shape the Permit Package
Every option below changes both the drawings and the review path. Pick them early.
- Attached vs. detached: A detached ADU avoids fire-wall detailing but triggers its own utility trenching and a separate address. Attached ADUs share walls and services but compress into the existing footprint and often run into structural upgrade needs.
- One story vs. two: A two-story rear ADU squeezes more square footage onto a narrow lot but adds a stair, a taller shear wall, and more structural review. Height limits near historic districts are tighter.
- Panel upgrade vs. existing service: An all-electric ADU with heat-pump water heating usually needs a 200-amp service. Keeping gas or working within 100 amps saves $8,000 – $15,000 in electrical scope but limits appliance choices.
- Exterior skin: Stucco matches the Edwardian character most San Francisco blocks expect. James Hardie fiber cement holds up better against coastal fog but needs careful trim detailing to pass historic review.
- Interior finish grade: A rental-grade ADU with a Wellborn cabinet package and a laminate counter reads fine to tenants. A family-use ADU in Cambria or Silestone quartz is worth it if the space gets daily use.
Each of these decisions gets locked before drawings are stamped. Changing a finish after submittal means a revision and another review cycle.
What ADU Design & Permitting Costs in San Francisco, CA
Design and permitting for a San Francisco ADU typically lands between $53,100 and $153,400, depending on scope. That’s the design-and-permit line item, not construction. Full ADU construction on top of it runs $106,200 – $259,600.
Here’s what moves the number to the low or high end:
- Lot and existing condition: A flat Noe Valley lot with clean access prices at the low end. A steep lot or a soft-story building needing retrofit work pushes to the high end.
- Discretionary review risk: Historic-district or Special Use District parcels can add $10,000 – $25,000 in planning consultant time and drawing revisions.
- Structural complexity: Cantilevers, retaining walls, and hillside foundations drive engineering fees up significantly.
- Number of drawing revisions: A clean submittal that clears plan check in one pass costs less than one that cycles three times.
- Scope bundling: Designing the ADU alongside a kitchen or bath remodel in the main house spreads the drawing cost. Homeowners often pair this with Full Kitchen Remodeling in San Francisco when they’re already living through construction.
A written estimate from us breaks out architecture, engineering, permit fees, and Planning review as separate line items. It does not include city permit fees paid directly to DBI, which typically run $5,000 – $12,000 for an ADU, or construction. We show you both so there are no surprises. Calls are answered by a live person around the clock, and pricing stays fixed once the scope is signed.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco’s housing stock changes this job more than any other factor. We work on 1880s – 1920s wood-frame Victorians and Edwardians packed shoulder-to-shoulder on narrow lots across the Mission, Noe Valley, and the Haight, and nearly every one of them sits on an unreinforced soft-story garage. Designing an ADU behind a building like that means the structural drawings have to address the Soft-Story retrofit ordinance at the same time, or you’ll be back at DBI with a second permit. And the Planning Department’s historic-review triggers, which barely exist on a Peninsula lot, can add two to three months to a review that would otherwise be straightforward.
Coastal fog plays its own role. We schedule exterior framing, stucco, and painting into the dry season because constant damp winters make exposed wood a rot and mold risk. The fog line near Twin Peaks often decides whether a concrete pour happens that week. For homeowners we serve across San Francisco, that means design timelines get built around weather windows, not just permit queues.
The work is part of a broader project, so we run it as our Home Additions & ADU service and, where the design also touches the main house, we bring in fixtures and finishes from the same brand pool. Homeowners often pair this with Cabinets & Countertops in San Francisco if the ADU will be a guest suite or rental. All of it falls under our 730-Day Done Right Promise, backed in writing.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – ADU Design & Permitting in San Francisco
Design and permitting usually take 6 to 12 months from the first site walk to an issued permit. Historic-district properties, discretionary review, and soft-story retrofit requirements push toward the high end. Call (833) 997-7759 for a timeline based on your specific lot.
Yes. Every ADU in San Francisco requires a building permit from the Department of Building Inspection, and most need Planning Department review as well. There’s no legal path around it, and unpermitted work becomes a disclosure problem at resale. We pull the permits and pass the inspections as part of the job.
Often, yes. Placing the ADU over an existing garage or within the first floor usually lets us tie into existing plumbing and electrical, which saves substantial cost. The trade-off is that these conversions still trigger structural review, especially in soft-story buildings. We confirm the constraint on the site walk before promising it.
Design and permitting runs $53,100 – $153,400 depending on lot, historic status, and structural complexity. City permit fees are separate and typically run $5,000 – $12,000. Call (833) 997-7759 for an exact quote. Estimates are free.
Every ADU design and permit project falls under our 730-Day Done Right Promise. If something in the work isn’t right, we make it right, and that’s in writing. We also stand behind the engineering and drawings through permit issuance and construction.
Get a Free ADU Design & Permitting Estimate in San Francisco
If you’re planning an ADU on a San Francisco lot, the fastest way forward is a site walk. We’ll check your zoning, historic status, and soft-story condition, then come back with a written scope that breaks out design, engineering, and permit fees separately. Call (833) 997-7759 to schedule your free estimate. Live person, every call.
Written by the team at Groundwork Construction Co.