Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in El Cerrito, CA: Cost, Timeline, and What the Job Really Involves
A tub-to-shower conversion in El Cerrito typically runs $3,500 to $10,000 and takes five to ten working days from demo to final inspection, depending on whether we’re opening the wall for plumbing and how the existing tub drain is set. That number covers removing the old tub, prepping and waterproofing the wet area, setting a new shower base or tiled pan, wall finish, valve trim, and a glass or curtain-ready opening. Call (833) 997-7759 and we’ll walk your specific bathroom before anyone quotes it.
How the Work Actually Unfolds, Day by Day
Most contractors describe this job as “we handle everything.” Here’s what actually happens, in order, with the decisions sitting on your side of the table at each stage.
Stage 1: Measure, open, and confirm what’s behind the tub (day 1)
We pull the tub, the surround, and enough drywall or cement board to see the valve, the drain trap, and the studs. This is the moment the real scope shows up. In El Cerrito’s older homes we frequently find galvanized supply lines that need replacing or a drain that sits higher than a modern shower pan allows. You decide then whether to replace the valve and lines while the wall is open, which is almost always cheaper than doing it later.
Stage 2: Rough-in plumbing and framing (days 2 – 3)
If the shower footprint differs from the tub footprint, we reframe the opening, adjust the drain to a center or offset position, and set the rough-in for a pressure-balance or thermostatic valve. We hang the waterproofing backer and, where required, schedule the rough plumbing inspection. You pick the valve finish and handle style at this point so nothing is ordered late.
Stage 3: Waterproofing and pan (days 3 – 4)
This is the stage that determines whether your shower leaks in year eight. We bond a waterproof membrane to the pan and walls, pre-slope the floor so water drains, and test the pan. A pre-formed shower base skips the pan work but still needs a properly sealed joint where it meets the wall. You choose base versus tiled pan here, and it changes the schedule by about a day.
Stage 4: Tile, surround, and trim (days 5 – 7)
Wall tile, grout, valve trim, a niche if you added one, and the shower head and controls. Grout cures before anything heavy touches it. You decide the tile format and grout color in stage 1, not here, because lead times on tile run one to three weeks and stop the job cold if decided late.
Stage 5: Glass, final inspection, and walkthrough (days 8 – 10)
Glass panels or a framed door go in, the final plumbing and electrical inspection gets signed off, and we walk the shower with you, running water, checking slope, and handing over care instructions. Any punch-list items are written down and scheduled.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Shower
You’re really choosing between a few configurations. Each one trades cost against longevity and how the bathroom feels.
- Pre-formed acrylic base vs. tiled pan with a linear drain. An acrylic base is faster, cheaper, and easier to keep clean; a tiled pan with a linear drain looks intentional and drains better but adds a day of labor and about $1,200 to $2,500.
- Acrylic surround vs. porcelain or ceramic tile. Acrylic is the budget path and wipes down easily. Tile lasts decades and lets you match the rest of the room, but grout needs resealing and the material cost climbs fast.
- Framed glass door vs. frameless panel. A framed pivot door is the practical pick in a tight footprint. A frameless fixed panel opens the room visually but runs higher and needs precise wall condition to install clean.
- Pressure-balance vs. thermostatic valve. The standard valve is fine for most homes. A thermostatic valve costs more but holds water temperature steady when someone flushes a toilet in a house with older plumbing, which is common in El Cerrito.
- Built-in bench vs. no bench. A bench adds about $600 to $1,500 in framing and finish but changes how usable the shower is for anyone who needs to sit.
What Tub-to-Shower Conversion Costs in El Cerrito, CA
Expect $3,500 to $10,000 for the conversion, with the low end being a simple acrylic base and surround in a bathroom where the plumbing stays put, and the high end being a tiled shower with a linear drain, new valve, new glass, and some framing or plumbing relocation.
Here’s what moves the number:
- Size and configuration. A standard 60-inch alcove conversion is straightforward. A larger footprint or a curbless entry means reframing and floor work.
- Existing condition. Old galvanized lines, a rotted subfloor, or a drain move all push the job up. We price that after opening the wall, never as a surprise later.
- Plumbing and electrical relocation. Moving the drain or adding a light and fan behind the shower is real scope.
- Material grade. Acrylic to porcelain tile is a several-thousand-dollar swing purely in materials.
- Permit scope. A straight fixture swap may not require a permit; new plumbing and electrical do, and that inspection adds time and a fee.
A written estimate from us is line-itemed and it’s what you pay. The 730-Day Done Right Promise backs the workmanship on top of that. What a written quote typically doesn’t include: tile you haven’t selected yet, hidden water damage behind the wall, or HOA approval if your El Cerrito property is in a governed community.
See the difference
Before
After
Before
After
Before
AfterWhat El Cerrito Homes Specifically Do to This Job
El Cerrito’s housing stock is mostly 1940s to 1960s single-family homes, which means the bathrooms we open here are original more often than not. In the flats below San Pablo Avenue you’re working in mid-century ranch and postwar tract homes, and in the split-levels and hillside homes climbing toward Kensington the pier-and-post framing changes how a shower pan gets supported and how a new drain run gets routed. That’s why we don’t quote a tub-to-shower conversion in El Cerrito off a phone description alone.
The other local reality is plumbing. Many of these homes still have galvanized supply lines and an electrical panel that predates GFCI requirements, so once the wall is open you’re often deciding between a straight conversion and a slightly larger scope that brings the shower up to current code. If the bathroom is part of a full Bathroom Remodeling in El Cerrito, we coordinate the trades so nothing gets torn out twice. And if the water intrusion that started this project came down through the roof, homeowners often pair this with Tile Roofing in El Cerrito to stop the source before the interior gets fixed. We cover all of El Cerrito, ZIP 94530 included.
Serving El Cerrito, CA – Our Local Coverage Area
We serve El Cerrito and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in El Cerrito
Most conversions run five to ten working days once materials are on site, with tile lead times adding one to three weeks before the job starts. A simple acrylic conversion in a bathroom where plumbing stays put can finish in five; a tiled shower with a linear drain and glass runs to the ten-day end. Call (833) 997-7759 for a timeline specific to your bathroom.
You need a permit whenever plumbing, electrical, or structural work is new or relocated. A pure fixture swap with no changes behind the wall may not require one. Inspections happen at rough-in and final. We pull the permit and handle the inspection when scope requires it, and we tell you up front which path your job is on. Call (833) 997-7759 and we’ll confirm what applies to your address.
Yes, in most cases. A standard 60-inch tub converts to a shower using the existing drain location if the drain is close enough to center and the valve stays where it is. The closer the existing drain is to a workable position, the lower the cost. When the drain sits too high or too far off center, we relocate it, which is where the price steps up.
Roughly $3,500 to $10,000, with the high end covering a tiled shower, a new valve, glass, and some framing or plumbing work. Acrylic base and surround in a simple alcove sits at the low end. Call (833) 997-7759 for a written, line-itemed estimate; the estimate is free and the number you see is the number you pay.
Workmanship is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right within that window, and that applies to the waterproofing and installation, not just the parts. Product warranties from the fixture and tile makers sit on top of that. Call (833) 997-7759 to talk through the coverage on your project.
Get a Free Tub-to-Shower Conversion Estimate in El Cerrito
If you’re ready to trade the tub for a shower you’ll actually use, call (833) 997-7759. A live person answers, day or night, and we’ll set a free on-site estimate at your El Cerrito home. On that visit we measure the bathroom, confirm whether the drain and valve can stay, and hand you a written line-item quote before you commit to anything. Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and you’ll get straight answers on cost and schedule. This is our bathroom remodeling work at its most focused: one job, done right, backed in writing.
Written by the team at Groundwork Construction Co.