Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in South San Francisco: What You’re Actually Getting Into
Custom & geometric windows in South San Francisco typically run $9,440 to $29,500 installed, and most jobs take three to five weeks from in-home measure to final inspection. That range covers arched, trapezoid, triangular, radius-top and true custom-shaped units – anything that isn’t a rectangle coming off a stock shelf. Call (833) 997-7759 and we’ll walk your openings and give you a real number, not a phone estimate.
What drives the cost more than anything is whether the opening already exists and how bad the geometry is. A trapezoid meant to fill a gable that’s framed and flashed correctly is one job. A five-sided bay that a previous owner cut into a load-bearing wall with a Sawzall is a very different one.
How We Build a Custom Window Project from Measure to Final Inspection
The order of operations matters more on geometric work than on any rectangular replacement. Here’s the sequence we actually run, and when you’re on the hook for a decision.
Stage 1 – The measure and template (day 1, 90 minutes)
We measure the rough opening, check level and plumb on all four sides, and confirm what’s behind the drywall: king and jack studs, header size, and whether the opening was ever engineered or just framed by feel. For a radius or arch, we build a template or pull a digital trace so the manufacturer is working from your exact curve and not a nominal one. You decide at this stage whether we’re matching existing trim or replacing it.
Stage 2 – Shop drawings and your sign-off (days 2 to 7)
Custom shapes go back to the manufacturer as shop drawings – exact radii, muntin layout, glass spec, exterior cladding, screen configuration. On Andersen and Marvin units this review usually takes three to five business days. You sign off on the drawing before anything is cut. This is the single most important decision point on the whole job: once it’s released to production, a wrong radius is your window, non-returnable, and nobody eats that but you.
Stage 3 – Lead time and permit (weeks 1 to 5)
Custom geometry runs four to six weeks in most cases. Straight rectangles are quicker; a compound-curve unit is slower. If the opening is changing size or the header is moving, we pull the permit during this window and get the structural review done while the window is in production. You don’t decide anything here – you wait, and we chase the factory.
Stage 4 – Tear-out and framing (one to two days)
Old unit out, opening opened up, header checked or replaced, and the rough opening squared and shimmed to the new frame. If the wall turns out to have something we didn’t see – rotted sheathing, a surprise electrical run, stucco that’s failing – that’s when it surfaces, and that’s when we photograph it and call you before we add anything.
Stage 5 – Set, flash, finish, inspect (two to three days)
Window set plumb and square, integrated flashing and sill pan installed, exterior sealed and trimmed, interior drywall patched and cased. Final inspection follows. On the flatlands west of the 101, the two things that decide whether this window leaks in year three are the sill pan detail and the drainage plane behind the trim – we don’t skip either, and our 730-Day Done Right Promise covers the workmanship that surrounds them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Custom and geometric windows force real trade-offs. Here’s what the choices are, and what each one honestly costs you.
- Wood-clad (Andersen, Marvin): The standard for arches and true shapes, because wood takes a compound curve and vinyl doesn’t. Warm interior, durable aluminum or fiberglass cladding outside. Expect to pay at the top of the range. Best for gable and feature windows you look at every day.
- Vinyl: Cost-effective and low-maintenance, but limited to shallow radii and simpler shapes. Vinyl can’t do a tight arch cleanly, and mitered corners show gaps on acute angles. Fine for a rectangular clerestory; wrong for a true radius.
- Fiberglass: Strong, stable, paints like wood, and holds a shape better than vinyl. Mid-to-upper pricing. Good for trapezoids and polygons where you want paint-grade interior and low maintenance.
- Glass spec: Double-pane low-E is the baseline. South San Francisco’s fog belt means condensation on cold mornings is normal – a warm-edge spacer and argon fill make a visible difference over a single-pane or basic unit. Tempered glass is required on anything close to a floor or a door, and a geometric window near a stair is a code item.
- Muntins and grilles: Simulated divided lites on an arch cost more and look more like the pre-war homes on the west side. Between-the-glass grilles are cheaper and easier to clean. This is where a lot of budgets quietly shift by a few hundred dollars per unit.
- Trim and casing: Interior casing in poplar or MDF versus a matched species. Exterior trim in PVC versus wood. On the damp side of the 101, PVC exterior trim holds up better and costs more up front.
What Custom & Geometric Windows Cost in South San Francisco, CA
For South San Francisco, custom and geometric window installations land between $9,440 and $29,500 for a typical project, with the low end covering one or two simpler shaped units and the high end covering a multi-window feature wall with structural work.
Five things push a job to the high end:
- Shape complexity. A trapezoid or rectangle-with-a-radius is at the low end; a true compound arch or a five-sided polygon costs substantially more per unit.
- Opening changes. Enlarging, raising the header, or cutting a new opening into a wall adds framing, structural review and patching on both sides.
- Existing condition. Pre-war and mid-century homes on the west side often have a header that was never engineered and stucco that fails on demo. That’s a real cost, discovered on day one of tear-out, and we tell you before we touch it.
- Material grade. Wood-clad and fiberglass run higher than vinyl; Andersen and Marvin sit at the top of the scale.
- Permit scope. A same-size swap is a simple permit; a new or resized opening can trigger structural review and a longer inspection cycle.
A written estimate from us is line-itemed: window units by size and spec, labor for demo, framing, flashing, trim and finish, permit, and disposal. What it doesn’t include until we’ve been inside is unforeseen rot or structural repair – and when that shows up, you get a photo and a price before any work continues. The number you see is the number you pay on the scope we quoted.
See the difference
Before
After
Before
After
Before
AfterWhat South San Francisco Homes Do to This Job
South San Francisco is a working city, not a bedroom community – the biotech and logistics cluster around Genentech and its suppliers keeps a lot of construction here pointed at commercial and life-science tenant improvements rather than residential remodels. The practical effect for a homeowner: permit reviewers here are used to code-heavy, life-safety-driven submittals, so a resized window opening that triggers structural review moves through a system built for commercial scrutiny. Bring a proper drawing and it goes faster than you’d expect. Bring a napkin sketch and it stalls.
The housing stock on the flatlands west of the 101 runs from pre-war to mid-century, and the older homes commonly carry knob-and-tube wiring, cast-iron drains and unpermitted additions – any of which can surface the moment you open a wall. Newer infill townhomes along El Camino Real and near the Caltrain corridor are a different animal: tight lot lines, shared walls, HOA design review before any exterior change, and a window spec that has to match the building’s approved style. We check the HOA packet before we order glass.
The fog belt is the other factor. Cool, damp summers and persistent onshore wind mean wind-driven rain and extended dry-out times, so flashing and drainage detail carry more weight here than a few miles south on the sunnier Peninsula. If your project turns into a bigger exterior job, homeowners often pair this with Windows & Doors in South San Francisco for the rest of the openings, or with Concrete Driveways & Concrete Work in South San Francisco if the driveway gets torn up in the process. And yes – we cover South San Francisco end to end, plus Windows & Doors as a whole if you’re still at the planning stage.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in South San Francisco
Plan on three to five weeks total, with four to six weeks of that being manufacturer lead time on the shaped units. The on-site work is two to four days. Call (833) 997-7759 and we’ll give you a realistic schedule for your specific openings.
Yes, if the opening changes size or the header moves, and sometimes even for a same-size swap depending on the scope. A pure like-for-like replacement may not require one, but the city decides that, not us – we pull the permit and handle the inspection either way.
Often, yes – if the opening is already framed and the header is adequate, we can set a shaped unit into the existing opening with no structural work. That’s the lower-cost path, and we confirm it after the first measure. Call (833) 997-7759 to book it.
Most projects land between $9,440 and $29,500 installed, depending on shape complexity, material and whether the opening changes. A single trapezoid into an existing gable sits at the low end; a multi-window arch feature wall with framing sits at the top. Call (833) 997-7759 for a line-itemed quote – the estimate is free.
Every custom and geometric window install we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship around the window: flashing, sealing, framing and trim. The manufacturer covers the unit itself. Call (833) 997-7759 with questions before you sign anything.
Get a Real Number on Your Custom & Geometric Windows
Call (833) 997-7759 to schedule a free on-site estimate in South San Francisco. We measure the openings, check the framing, and give you a written, line-itemed quote with the window specs spelled out and no surprises in the fine print. Live person answers, 24/7. If you qualify, $1,000 off projects over $10,000 and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co.