Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Daly City: What They Cost and How the Work Runs
Custom & geometric windows in Daly City run about $6,500 to $28,000 for a multi-opening project, with most hillside homes landing near $12,000 to $18,000 once framing repairs and stucco patching are folded in. A typical build takes 4 to 7 weeks from template to final inspection, because angles, arches and trapezoids are made to order. Call (833) 997-7759 for a free on-site estimate.
How a custom or geometric window project actually runs
These aren’t stock units pulled off a shelf. Each opening is measured to the sixteenth, drawn, and built for your specific shape, which is why the timeline is longer and the process matters as much as the product. Here’s the sequence we follow, and what you’ll be deciding at each stop.
Stage 1: On-site measure and template (day 1, about 2 hours)
We photograph every opening, check the existing frame for rot and square, and use a digital angle finder on anything non-rectangular: gable peaks, eyebrow arches, angled bays. On Daly City hillside homes, this is also where we find out whether the rough opening is true or whether the stucco has been holding it in place. You’ll decide which openings are in scope and whether you’re matching the existing stucco trim or starting clean.
Stage 2: Shop drawing approval (day 3 to day 10)
You get a scaled drawing of every unit: dimensions, radius, muntin layout, glass package, and finish. Nothing gets cut until you initial it. This is the stage where homeowners change their minds about the radius on the arch, and it’s the cheapest time to do it. Allow a week for your review; the shop won’t release to production without your sign-off.
Stage 3: Fabrication (weeks 2 through 5)
Geometric units in a fiberglass or aluminum-clad frame typically take 3 to 5 weeks at the manufacturer. Straight custom sizes come in faster, around 2 to 3 weeks. We order Andersen for most arched and radius work; their custom shop handles the geometry consistently. This is dead time on site, so the interior tear-out doesn’t start until units are staged.
Stage 4: Demo, framing, and set (2 to 4 days)
Day one is tear-out and framing: we open the wall, replace any rotted studs and header blocking, and check the rough opening against the template. Day two is the set and shim, low-expansion foam, flashing, and the first bead of sealant. On a four-opening project, figure three days; add a day if we’re rebuilding a bay or a curved header. You’ll decide whether the interior drywall return is patched by us or your painter.
Stage 5: Stucco, trim, and inspection (4 to 8 days)
Exterior patching is the part that gets rushed on cheap jobs and shows up two winters later. We use a three-coat stucco patch on Daly City walls and let it cure before the finish texture goes on. Final inspection happens after flashing is visible and secure. You get a walkthrough and a written punch list before final payment.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Custom and geometric openings look simple on a drawing and get complicated in the spec sheet. Here’s what actually moves your decision.
- Frame material: fiberglass vs. aluminum-clad wood vs. vinyl. Fiberglass holds paint well and won’t rot; it’s the choice for fog-facing walls. Aluminum-clad wood gives you the tightest curves and the nicest interior, but the cladding can dent. Vinyl is the cheapest option, and on a tight-radius arch it’s limited in how it can be bent.
- Glass package. Double-pane Low-E is the baseline. On the damp west side of Daly City, we usually spec a warm-edge spacer to cut interior condensation on cold mornings. Triple-pane is available but rarely worth the weight and cost here.
- Muntin and grille layout. Simulated divided lites match the 1950s look; between-the-glass grilles are cheaper and easier to clean. Custom geometric shapes often need a true divided lite for the grille to follow the curve correctly.
- Finish and trim. Stucco return, wood casing, or a flush modern head. Each adds $200 to $900 per opening depending on complexity.
- Brand and shop. Andersen covers most arched and radius work. ViewLux and ECO Window Systems are worth pricing on straight custom sizes. Mr-Glass is a reasonable stop for a single replacement geometric unit.
What custom & geometric windows cost in Daly City, CA
Expect $6,500 to $28,000 for a full custom and geometric project, with most Daly City jobs landing in the $12,000 to $18,000 range. The number is driven by shape and prep, not by brand marketing.
| Line item | Typical range |
|---|---|
| Single straight custom window (supply + set) | $900 – $2,400 |
| Arched or radius window | $1,800 – $4,200 |
| Trapezoid, gable, or angled unit | $1,600 – $3,800 |
| Framing and rot repair (per opening) | $300 – $1,800 |
| Stucco patch and texture (per opening) | $400 – $1,200 |
| Interior trim and drywall return | $250 – $700 |
| Permit and inspection fees | $150 – $600 |
What pushes you toward the high end: irregular geometry that requires shop drawings, a full bay or curved-header rebuild, fog-side walls with soft framing that needs sistering, or a project where we’re replacing 6+ openings. What keeps a job low: a single straight custom unit, healthy existing framing, and no stucco work on the interior side. Every written estimate is line-itemed, and the price you see is the price you pay. If we find rot behind a wall after demo, we write a change order and you approve it before anyone touches a stud. We don’t do surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
The city sits on wind-blown sand and steep hillside terrain below San Bruno Mountain, so almost every custom window job here starts with an unknown: what’s behind the stucco. On the streets above Mission Street, we routinely open a 1950s south-facing wall and find the original framing sitting on shallow footings in sandy fill, with dry-rot climbing the studs from the sill up. The fog-soaked west-facing walls in Westlake and Serramonte rot from the outside in, and homeowners don’t notice until the paint bubbles. Flashing and a proper drained stucco detail matter more on these walls than the glass package does.
Permitting is straightforward but not instant. Daly City requires a permit for window replacement when the rough opening changes or the unit is in a fire-rated property-line wall – which happens a lot on the tight lots along the El Camino corridor. Inspections get scheduled within a few days, but the process is not a rubber stamp on a hillside. If you’re working on an apartment building, soft-story rules can add plan check time. Coastal wind loading also factors in; a standard residential window spec doesn’t always pass on the exposed slopes above Westlake. If the wider scope of your project touches doors or impact units, see our Windows & Doors in Daly City coverage. And when you’re ready to schedule, remember we serve the whole city, from Daly City hillside streets to the flat blocks near the border.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: custom & geometric windows in Daly City
Most projects take 4 to 7 weeks from final measurement to last inspection: roughly one week for shop drawings, two to five weeks for fabrication, and under two weeks on site. Call (833) 997-7759 to get a realistic timeline for your openings.
Yes, if the rough opening changes or the opening is in a fire-rated wall. Straight replacement in the same opening usually doesn’t need one, but geometric and angled units almost always do because the framing changes. We pull the permit and manage the inspection. Call for a scope check.
Usually yes. A trapezoid, arch, or angled bay window can go into the existing header if the framing is sound; we only open the wall, we don’t move plumbing or electrical unless the opening gets bigger. If rot is severe, we sister or replace studs within the same footprint. Estimates are free.
A single arched or angled unit runs about $1,800 to $4,200 installed, and a full multi-opening project lands between $6,500 and $28,000. Rot repair and stucco patching are the two line items most likely to move the total. Call (833) 997-7759 for an exact quote.
The workmanship is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers installation, flashing, and sealant for two full years. Manufacturer warranties on the glass and frame pass straight to you. Call for the full written warranty detail before you sign anything.
Schedule a free estimate for custom & geometric windows in Daly City
If you have an arched gable, an angled bay, or a curved opening you’ve been staring at for a while, the next step is a free on-site estimate. We’ll measure every opening, photograph the framing if it’s exposed, and hand you a line-item quote with the shape, glass package, and timing spelled out. No pressure, no surprises. Call (833) 997-7759 to book. While we’re on site, we can also talk through Concrete Driveways & Concrete Work in Daly City or Asphalt Driveways & Resurfacing in Daly City if your exterior is getting a broader refresh. Our windows & doors service is part of the Windows & Doors work we handle across the region.
Written by the team at Groundwork Construction Co.