Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Foster City, CA: What It Takes and What It Costs
Door installation in Foster City typically runs $850 to $3,200 per exterior door, including removal of the old unit, framing correction, flashing, and finish work, with most single-door jobs finished in one to two days. Interior door swaps land lower, around $350 to $900 per door installed. Call (833) 997-7759 for a free on-site estimate and a written line-item quote.
Builder-Grade Doors on a Fill-Island: Why Foster City Doors Fail Early
Most of Foster City’s single-family homes went up during the 1960s through 1980s master-planned build-out, and the doors that came with those houses were never meant to last four decades. Builder-grade hollow-core slabs and thin steel patio doors were fine the day the keys were handed over. Forty years of salt-laden onshore wind, fog-heavy winters, and lagoon-side humidity later, they’re sagging, sticking, swelling at the base, and letting bay air straight into the frame. On the bay side of the lagoons, we see hinges and strike plates corroded down to bare metal before the door itself has failed.
That’s the reality of door installation in Foster City: the job isn’t just hanging a new slab, it’s correcting four decades of trapped moisture and settling on fill soil. For homeowners in the tract neighborhoods off Shell Boulevard and Beach Park Boulevard, a door replacement is also the moment to fix what the builder skipped, including proper flashing, a sill pan, and weatherstripping rated for wind-driven rain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Door Installation Process, Stage by Stage
Every door installation we do in Foster City follows the same sequence. Here’s what actually happens, and when you’ll be asked to make a decision.
Stage 1: Site walk and measurement (day 1, 60 – 90 minutes)
We measure the rough opening, check the wall for plumb and square, and confirm which way the door swings. This is where you decide the door style (slab, pre-hung, or French), the material, and whether you’re upgrading to an impact-rated unit. We also check for existing rot in the framing, which is common in homes this age near the water.
Stage 2: Written quote and permit check (day 2 – 5)
You get a fixed line-item quote with no change-order surprises. If the door is a new opening, a structural change, or an exterior door in a flood-plain zone, we walk you through whether a permit is required and pull it for you.
Stage 3: Demo and prep (day of install, 2 – 3 hours)
We pull the old door and frame, inspect the sill and header for water damage, and replace any soft wood. This step is where most cheap door jobs cut corners: skipping the sill pan means water wicks in from day one.
Stage 4: Install, flash, and seal (3 – 4 hours)
The new unit goes in level and plumb, flashing goes on in the correct shingle-lap order, and we seal the perimeter with a marine-grade exterior caulk rated for coastal salt exposure. That last detail matters more in Foster City than almost anywhere else in the Bay Area.
Stage 5: Finish and walkthrough (1 – 2 hours)
We reinstall trim, adjust the strike plate and hinges, test the latch and weatherstripping, and walk the job with you before we leave. If you’d rather we handle the trim carpentry and paint as part of a larger scope, that folds naturally into our Windows & Doors service.
The Options You’ll Choose Between
Door installation in Foster City comes down to a handful of real choices. Here’s what each one actually costs you in performance and dollars.
- Fiberglass exterior doors (Therma-Tru): The go-to for bayfront homes. They don’t warp or rot, they hold paint well, and they handle wind-driven rain better than wood. Expect $1,100 – $2,400 installed at the higher end of the door installation Foster City range.
- Steel doors: Strong and secure, good for entry doors, but they dent and rust faster in salt air. Fine on the inland side of the lagoons, less ideal on the bay side.
- Wood doors: Beautiful and period-appropriate for the 1970s homes here, but they need regular sealing and refinishing against our fog-heavy winters. Higher maintenance, higher character.
- Impact-rated glass (where required): If your door includes glass panels, upgrading to impact-rated glazing protects against wind-borne debris and can help with insurance. Windows & Doors in Foster City covers the full impact spec if you’re doing a whole-house package.
- Hardware and finish: Stainless or marine-grade hardware resists corrosion far better than standard plated finishes on lagoon-facing doors. It’s a small upcharge that pays back over a decade.
Homeowners who are already upgrading exterior openings often pair this with a new Chain Link Fence in Foster City or a Vinyl Fence in Foster City to finish off the property line in the same visit.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation Costs in Foster City, CA
Exterior door installation in Foster City runs $850 to $3,200 for a standard single door, and interior door installation runs $350 to $900 per door. Here’s what moves the number to the low or high end:
| Line item | Typical range |
|---|---|
| Interior door (single, installed) | $350 – $900 |
| Standard exterior door (single, installed) | $850 – $1,800 |
| Entry door with sidelights (installed) | $1,400 – $2,800 |
| French or double door (installed) | $1,800 – $3,200 |
| Impact-rated upgrade (per door) | add $300 – $700 |
| Rot repair / framing correction | $150 – $750 |
What pushes a job toward the top of that range: a new rough opening instead of a swap, old galvanized framing that needs repair, impact-rated glazing, or an entry door with sidelights. What keeps it low: a straight swap in a sound opening with pre-hung hardware. Every written estimate spells out what’s included (demo, sill pan, flashing, trim, finish hardware) and what’s not (painting, custom glass, structural changes). No-hassle upfront pricing, no surprises: the number you see is the number you pay.
What Foster City Homes Specifically Do to This Job
Foster City is an engineered island community built on imported fill and ringed by levees and lagoons, and that changes how a door installation actually goes. The high water table and liquefaction-prone soil mean door frames settle unevenly over time, which is why so many homes here have doors that stick on one corner. The bayfront climate brings persistent onshore wind and salt air that corrode standard hardware fast, and winter king-tide flooding pushes water against thresholds that the original builder-grade doors were never designed to hold. If you’re doing a door installation in zip code 94404, plan on marine-grade fasteners, a proper sill pan, and a threshold that actually drains. We handle door installation all across Foster City, and we know the difference between a slab swap and a proper bayfront install.
Serving Foster City, CA – Our Local Coverage Area
We serve Foster City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Foster City
A single exterior door installation in Foster City takes one day, usually 4 to 7 hours from demo to final walkthrough. Interior doors go faster, often 2 to 3 hours each. Whole-house packages get scheduled across multiple days. Call (833) 997-7759 to lock in your date.
A straight replacement in the same opening generally does not require a permit, but a new opening, structural header change, or a door in a flood-plain elevation zone will. We identify which category your job falls into during the site walk and pull any required permit for you.
In most cases yes, because door installation keeps the existing opening and framing. That’s why it’s one of the least disruptive exterior jobs for a Foster City home. Structural changes only come into play for new openings or widening an existing doorway.
Exterior doors run $850 to $3,200 installed, and interior doors run $350 to $900 each. Rot repair and impact-rated glazing add to that. Call (833) 997-7759 for an exact quote; estimates are free.
Every door installation is backed by our 730-Day Done Right Promise. If it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential space, and it’s in writing before we start.
Get Your Free Door Installation Estimate
If your Foster City door sticks, leaks, or has rusted hardware from years of salt air, the fix is a proper installation, not another coat of paint. Call (833) 997-7759 to schedule a free on-site estimate. We’ll measure the opening, walk you through the material options, and hand you a written line-item quote with no surprises. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co.