







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Daly City, CA: What the Job Involves and What It Costs
Walk-In Showers & Shower Remodeling in Daly City, CA runs $9,000 – $28,000 for a full bathroom-scope remodel, and a shower-only install falls in the $4,500 – $12,000 range. Plan on 2 to 4 weeks from demo to final inspection for a standard shower build in a post-war Daly City home. The number that moves most is not the tile you pick, it’s what the wall behind it looks like once the old surround comes off. Call (833) 997-7759 to set a free on-site estimate.
How a Walk-In Shower Gets Built, Start to Finish

Most contractors describe a shower remodel as a single blur. Here is the actual sequence we run, stage by stage, with the decisions that land on you at each one.
- Day 1 – Demo and opening the wall. We pull the old surround, pan, and glass, then open the wall to the studs on the wet side. This is the stage that reveals the real job: soft framing, failed backer, or a drain that was never set right. You decide nothing yet, but you approve any change in scope before a single board goes back up.
- Days 1 – 2 – Rough plumbing and framing corrections. Valve replacement, drain re-set, and any sistering on rotted studs. If you’re keeping the existing fixture location, this stays short. Relocating the valve or moving the drain to fit a linear format is where the schedule starts to stretch. The homeowner’s decision here: keep the plumbing where it is, or pay to move it.
- Day 2 – 3 – Inspection window. Daly City shower work that touches plumbing or framing gets inspected before the wall closes. We pull the permit and meet the inspector. You don’t have to be home, but you do have to sign off on the layout before we close the wall.
- Days 3 – 6 – Waterproofing and backer. Cement board, a bonded waterproofing membrane, and a properly sloped pan. This is the stage nobody sees and the one that decides whether the shower lasts 10 years or 30. Fog-belt moisture makes this step non-negotiable in Daly City. Your decision: tile-ready membrane system versus a prefab pan and surround, which is faster and cheaper but a shorter lifespan.
- Days 6 – 12 – Tile, glass, and trim. Setting tile, grouting, sealing, then templating and installing glass. Frameless glass adds a day or two because it gets measured and cut to the opening. You pick tile and glass here, and this is where budget swings the widest.
- Final – Walkthrough and punch list. We test the drain, check the valve, inspect the caulk lines, and hand you the warranty in writing. Most jobs land in the 2 to 4 week window. If the framing behind the wall is bad, add a week.
When the shower is one piece of a larger project, homeowners often fold it into our Bathroom Remodeling in Daly City scope so the floors, vanity, and ventilation get handled in the same permit cycle. Standing alone, this job is fine as its own project. Either way, the walk-in shower is the piece that drives the timeline.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The material and configuration choices below are the ones that actually change the price and the lifespan of the job. Get these right and the shower performs for decades.
- Prefab pan and surround vs. tiled shower. A prefab unit costs less upfront and installs in a couple of days, but it’s a fixed look with a shorter lifespan and limited sizing. A tiled shower costs more and takes longer, but it fits a non-standard Daly City bathroom footprint and holds up through decades of fog-belt humidity.
- Frameless glass vs. framed vs. curtain. Frameless glass is the premium look and opens the space visually. It also costs the most and needs a perfectly square opening. A semi-frameless or sliding unit costs less and forgives an un-square wall. A curtain is the cheapest option and the one to skip in a bathroom that already runs damp.
- Curb vs. curbless. A curbless walk-in shower is the safer, more accessible configuration and the one most Daly City owners ask for in a home they plan to age into. It also costs more because the floor has to be recessed and re-sloped, which means framing work. A low curb is the middle option and the more common choice.
- Tile and finish grade. Porcelain is durable and easy to keep clean. Natural stone reads richer but needs more sealing, which matters in a damp climate. Large-format tile cuts grout lines but requires a flatter wall. Standard ceramic is the budget choice and the one that chips more.
- Fixtures and valve. A thermostatic valve and quality trim (Kohler is a strong pick for this climate) costs more but is what keeps the temperature stable and the cartridge serviceable. Cheap trim is the first thing to fail.
- Ventilation. A properly sized exhaust fan is not optional in a fog belt. Without it, the moisture has nowhere to go and the framing behind the tile pays the price. We spec this every time.
What Walk-In Showers & Shower Remodeling Costs in Daly City, CA

Expect $9,000 – $28,000 for Walk-In Showers & Shower Remodeling in Daly City, CA when the job runs as a full shower-scope remodel, and $4,500 – $12,000 for the shower install alone. Here’s how the number breaks down, and the variables that push a job to the low or high end.
| Line item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (existing footprint) | $3,000 – $8,500 |
| Full shower-scope bathroom remodel | $9,000 – $28,000 |
| Vanity and fixtures, if included | $800 – $3,000 |
The five variables that move the price:
- Size and configuration. A compact 36-inch shower in a tight Daly City bathroom sits at the low end. A 60-inch curbless walk-in with a bench and niche pushes to the top.
- Condition behind the wall. Rotted framing, a failed pan, or no waterproofing adds days and dollars. This is the variable we can’t price until we open the wall, which is why we quote after inspection, not on the phone.
- Relocating plumbing. Moving the valve or drain to a new wall adds rough-in plumbing cost and a longer inspection window. Keeping the fixture where it is saves money and time.
- Material grade. Porcelain and semi-frameless glass keep the number down. Natural stone and frameless glass push it to the top of the range.
- Permit scope. A shower install that touches plumbing and framing needs a permit. A cosmetic swap doesn’t. We tell you which one you’re in before the job is priced.
What a written estimate includes: demo, framing corrections we can see, waterproofing, tile, glass, trim, permit, and inspection. What it typically doesn’t: hidden rot behind the wall, upgrades you add mid-project, and fixture changes you decide on after the tile is set. Our estimates are upfront and line-itemed. The number you see is the number you pay, and any change gets your approval in writing before work continues. Our Bathroom Remodeling team builds every shower to that standard, and the 730-Day Done Right Promise covers the workmanship. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City is built on wind-blown sand dunes and steep fog-belt slopes of San Bruno Mountain’s western flank, and that changes this job in ways you don’t see in flatter Peninsula cities. The stock is overwhelmingly 1940s to 1960s stucco-over-wood-frame tract homes and low-rise apartments packed along Mission Street and El Camino, many on poured slab foundations set into graded hillside cuts. When we open a bathroom wall in a 1950s home on a steep street above the Mission Street corridor, we routinely find sandy fill and shallow framing. The persistent Pacific fog and onshore wind keep the west side (Westlake, Serramonte) damp year-round, with little sun to dry surfaces. Shower walls in those neighborhoods rot from the outside in, and homeowners often don’t find out until the tile starts to move. Neighboring cities like South San Francisco or Pacifica don’t face this same combination of shifting sand soil, active landslide mapping, and marine-layer moisture intrusion. So the waterproofing and ventilation detail on your Daly City shower is not a line item to trim. It’s the difference between a shower that lasts a decade or three. If you’re in 94015, 94016, 94017, or 94014, we work this ground regularly. Our Daly City service-area page lists the neighborhoods and streets we cover.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Daly City

Most shower-scope jobs take 2 to 4 weeks from demo to final inspection. The wide swing comes from what we find behind the old wall and whether the plumbing moves. If the framing is sound and the fixture stays put, expect the short end. Call (833) 997-7759 and we’ll walk you through what your timeline looks like after a quick walkthrough.
If the work touches plumbing, framing, or the shower pan, yes, you need a permit in Daly City, and the job gets inspected before the wall closes. A cosmetic swap of a surround over a sound pan typically doesn’t. We pull the permits and pass the inspections for you either way, and we quote the permit into the estimate so there are no surprises.
In most Daly City bathrooms, yes. Keeping the valve and drain in their existing locations lets us build a walk-in shower in the current footprint without major rough-in work. That keeps the job in the middle of the price range and shortens the schedule. A curbless walk-in is the exception because the floor has to be recessed, which means structural work. Call (833) 997-7759 for a free estimate and we’ll tell you which scenario your bathroom is in.
Expect $9,000 – $28,000 for a full shower-scope bathroom remodel, and $4,500 – $12,000 for a standalone walk-in shower install. The biggest price driver is the condition behind the wall, not the tile you choose. Call (833) 997-7759 for an exact quote. Estimates are free and line-itemed.
Every job is covered by our 730-Day Done Right Promise. If anything we installed fails because of workmanship, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing before we start. You also get live-person phone coverage 24/7 if something comes up after the crew has packed up.
Book a Free Estimate for Walk-In Showers & Shower Remodeling in Daly City
Call (833) 997-7759 for a free on-site estimate. We’ll open the wall, look at what’s there, and give you a line-itemed number before any work starts. No pressure to sign on the spot. And if you’re planning a larger exterior project alongside the bathroom, our crews also handle Roof Replacement & Installation in Daly City and Metal Roofing in Daly City, so you can line up both jobs through one contractor.
Written by the team at Groundwork Construction Co.







