Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Daly City, CA: What It Takes and What It Costs
Most backsplash, tile and flooring jobs in Daly City run $14,000 – $45,000 for a full kitchen surface package – floor, backsplash, and the tile work around it – and a backsplash alone lands between $800 and $2,500. A typical backsplash install takes 2 to 4 days; flooring, 3 to 6 days depending on square footage and substrate repair. If you’re pricing the work now, call (833) 997-7759 for a free on-site estimate.
How the Work Actually Runs, Start to Finish
Tile work fails for boring reasons: bad substrate, trapped moisture, rushed layout. Our job is to get the surface underneath right before a single tile goes down. Here’s the sequence we run on most Daly City kitchens.
Stage 1: Tear-out and substrate inspection (1 – 2 days)
We pull the old tile, flooring, or both and look at what’s underneath. On these hillside homes, that’s often sand and slab rather than clean plywood subfloor. Loose fill, cracked slab patches, and any soft spots in the framing get flagged here, not after the tile is set. You’ll see photos of what we found before we quote the repair.
Stage 2: Surface prep and flat work (1 – 3 days)
This is the stage most bids skip. We correct the floor plane with leveling compound or a self-leveling pour where the slab has settled, then seal the substrate against ground moisture. Backsplash walls get skimmed and squared so the tile grout lines run straight. Your decision here: how much correction you want versus how much you can live with.
Stage 3: Layout sign-off (half a day)
Tile gets dry-laid before it’s stuck down. That’s when you approve grout line width, where the pattern starts, how the outlets land, and where the tile stops behind the cabinets. Catching a layout you don’t like at this point costs nothing. Catching it after the adhesive cures costs a redo.
Stage 4: Setting tile and flooring (2 – 4 days)
Floor tile goes down first, then backsplash, because the floor drives the finish line heights under the cabinets. Larger-format floor tile needs 24 hours of set time before grout. The backsplash can be walked around same-day in most kitchens.
Stage 5: Grout, sealing, and final walkthrough (1 day)
Grout, caulking at every change of plane, sealant on natural stone, and a walkthrough where we hand you the care sheet and log the finish list against the 730-Day Done Right Promise. If a tile cracks or grout fails within the warranty window, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The material list is where the number moves the most. Here’s the honest split, from budget-friendly to premium.
- Ceramic vs. porcelain floor tile: Ceramic costs less but chips more easily and doesn’t handle wet foot traffic as well. Porcelain runs 30 – 50% higher and is the better fit for kitchens that see actual cooking and spills. In fog-belt Daly City, we lean porcelain.
- Luxury vinyl plank (LVP): The pragmatic pick for households that want warm floors, quiet underfoot, and zero grout lines. Cheaper than porcelain, faster to install, and it handles minor slab movement better than rigid tile. Trade-off: it will never look like stone.
- Backsplash material: Ceramic subway tile is the value standard. Glass and porcelain mosaic cost more but reflect light in small kitchens. Natural stone (travertine, marble) looks best but needs sealing every year or two – a real ongoing cost in a damp climate.
- Slab vs. tile backsplash: A single quartz or stone slab behind the range eliminates grout lines and cleans up easily, but costs more and requires the slab to be templated before the floor is finished.
- Grout and sealer: Epoxy grout costs more up front and resists stains far better than cement grout in a kitchen. On the fog-damp west side, we don’t skip sealing on porous stone.
What Backsplash, Tile & Flooring Costs in Daly City, CA
A full floor-plus-backsplash package here runs $14,000 – $45,000. A backsplash on its own runs $800 – $2,500. Line-item ranges we quote most often:
| Scope | Typical Range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Floor tile installation (kitchen) | $2,000 – $6,500 |
| Slab repair / floor leveling | $600 – $2,800 |
| Full package (floor + backsplash + tile) | $14,000 – $45,000 |
The variables that push a job high or low:
- Square footage and layout: A small galley kitchen runs low-end. A wide kitchen with a walk-in pantry and laundry nook pushes toward the top.
- Substrate condition: Settled slab, sandy fill, or uneven framing means leveling and repair that adds 10 – 20% to the line.
- Material grade: Ceramic versus porcelain versus natural stone can double the tile material cost on its own.
- Whether plumbing or electrical moves: Relocating an outlet, water line, or the range hood vent is a separate scope and a separate trade.
- Pattern complexity: Herringbone and large-format layouts take more labor than straight-set subway tile.
A written estimate from us breaks out demo, prep, material, labor, and disposal on separate lines so you can see what drives the total. What we don’t include unless the contract says so: cabinet removal and reinstallation, plumbing rough-in changes, and any electrical work beyond moving outlets within reach.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City sits on wind-blown sand and steep fog-belt slopes along the western flank of San Bruno Mountain, and that shows up the moment you pull a floor. On the steep streets above the Mission Street corridor, we routinely find 1950s homes built on minimal-depth foundations, and the slab under the kitchen has settled unevenly with the grade. That means floor leveling is a real line item here – not an upsell. The persistent fog off the Pacific, especially on the Westlake and Serramonte side, keeps surfaces damp with little sun to dry them out, so moisture under a floor or behind a backsplash is a longer-term problem than in sunnier Peninsula cities. In the ZIP codes we cover – 94014, 94015, 94016, 94017 – the housing stock is overwhelmingly post-WWII stucco-over-wood-frame tract homes and low-rise apartments, and any time we open a wall for a backsplash we’re checking for dry rot and soft framing before we tile over it. Building permits and inspection requirements get pulled where the scope requires them, and we walk the inspection with you.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Daly City
A backsplash alone takes 2 – 4 days. A full floor-plus-backsplash package takes 5 – 8 working days, with drying time for the adhesive and grout built into the schedule. Delays come from substrate repair and material lead times, not from the setting itself.
Cosmetic tile and flooring replacement generally doesn’t require a permit. If the scope touches a water line, an electrical circuit, or the structural wall behind the backsplash, permits and inspection do apply, and we pull them and walk you through that step. Call (833) 997-7759 to find out where your job falls.
Sometimes, but we don’t recommend it on these foundations. Tile over tile adds height to the floor plane, which throws off cabinet and appliance fit, and it hides the slab settling we need to see. On Daly City homes we’d rather pull the old floor, level the slab, and start clean.
Expect $14,000 – $45,000 for a full kitchen surface package, with backsplash alone at $800 – $2,500. The high end is driven by substrate repair, pattern complexity, and stone or slab selections. A written line-item estimate is what tells you where your number lands.
Every tile and flooring job is covered by the 730-Day Done Right Promise: if the work isn’t done right, we make it right, for two years from completion. Grout and caulking failures, cracked tile from installation, and adhesion problems are covered. Call (833) 997-7759 to ask about a specific concern.
Get a Free Estimate on Your Daly City Tile Work
If you’re pricing backsplash, tile and flooring in Daly City, start with a free on-site estimate. We’ll measure the space, photograph the substrate, and give you a written line-item quote before anything gets ordered. One call, one walkthrough, one number – and it’s the number you pay. Call (833) 997-7759; a real person answers around the clock.
Written by the team at Groundwork Construction Co.