Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Daly City, CA: What It Costs and How the Work Goes
An aluminum fence in Daly City typically runs $4,000 – $10,000, with most residential jobs landing somewhere around $3,500 – $9,000 depending on linear footage, grade of powder coat, and how much hillside prep the terrain demands. Most properties wrap up in two to five working days once materials are on site, with the bulk of that time spent setting posts to depth in sand. Call (833) 997-7759 and we’ll walk your property and put a real number in writing.
How We Install an Aluminum Fence on Sand and Slope
Daly City isn’t flat ground, and an aluminum fence here has to be planned around that reality from the first hour. Here’s how the work actually unfolds once you approve the estimate.
Stage 1: Layout and utility mark-out (half a day)
We walk the property line with you, string the fence run, and call for utility mark-out before anyone puts a shovel in the ground. You confirm the exact line and gate placement at this point. On narrow lots along the Mission Street corridor, an inch or two of setback matters, so this is the moment to settle it, not after posts are set.
Stage 2: Demolition and existing fence removal (half to one day)
Old wood, rusted chain link, or a tired vinyl run comes out and gets hauled off. On older Daly City properties the concrete footings from the previous fence are often set shallow in fill sand, and those have to be broken out cleanly rather than buried. If your old fence has dry-rotted posts, we inspect what sits behind it, because that’s where we most often find stucco damage worth addressing.
Stage 3: Post setting to engineered depth (one to two days)
This is the stage that separates a fence that lasts from one that leans in three years. Sandy dune soils and hillside cuts mean we set posts deeper and use more concrete per hole than a flat-lot job in a neighboring city would call for. On steep runs we step the panels in sections so the fence follows the grade instead of leaving gaps underneath. You don’t have to decide anything here; we handle the engineering and keep you updated on depth and layout.
Stage 4: Panels, rails, and gates (one to two days)
Racks, pickets, and gate frames go up, and we cut and fit each panel to the grade. Gate hardware gets set with an eye on how the aluminum will expand and contract through fog season. This is where you choose the gate style and latch type if you haven’t already.
Stage 5: Final walkthrough (same day)
We align gates, check every post for plumb, and do a walkthrough with you. Any touch-ups get noted and handled. Your written workmanship coverage carries a full 730 days under the 730-Day Done Right Promise, so if a post shifts or a gate drops, you make one call and we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh for an Aluminum Fence
- Powder-coat grade and finish: Standard architectural powder coat holds up well; a heavier marine-grade finish costs more upfront but resists the salt air and Pacific fog that push through Westlake and Serramonte year-round. Worth it on the west-facing runs.
- Residential vs. industrial gauge: Residential aluminum pickets and rails handle backyard privacy and light security. Thicker industrial gauge runs more per foot but resists bending and stands up to wind load on exposed hillside lots.
- Rackable vs. stepped panels: Rackable panels follow the slope at a continuous angle for a cleaner look on gentle grades. Stepped panels handle the steeper hillside streets better. Your lot decides this one.
- Picket spacing and height: Tighter spacing and taller sections raise cost but work well where you want pool-code compliance or more separation from a busy street. Standard spacing keeps the budget tighter.
- Gate and hardware upgrades: Basic latch gates come standard. Self-closing hinges and keyed hardware are a modest add and suit households with kids or a pool.
Brands like Barrette aluminum systems are a solid, proven choice for residential runs, and they hold their powder coat well in damp coastal conditions. We’ll show you samples on site so you’re picking a finish by look and feel, not a catalog photo.
What Aluminum Fence Costs in Daly City, CA
Residential aluminum fence in Daly City sits in the $4,000 – $10,000 range for most homes, with the broader spread on projects like this landing between $3,500 and $9,000. Here’s what’s inside that number and what pushes it toward the top or bottom.
| Cost factor | Low end | High end |
|---|---|---|
| Linear footage | ~80 ft, flat run | 150+ ft, multi-run or hillside |
| Old fence removal | Light wood, easy pull | Deep-set concrete footings in sand |
| Finish grade | Standard architectural coat | Marine-grade coastal finish |
| Gauge / panel climb | Residential spec | Industrial gauge, taller panels |
| Gates | One standard walk gate | Multiple gates, self-closing hardware |
What moves the price most is terrain. A level lot in the flats comes in toward the low end; a steep hillside run above the Mission Street corridor pushes toward the high end because of deeper footings and stepped panels. Existing fence condition is the next biggest swing, since breaking out old concrete in sandy fill adds labor. Material grade and gate count round out the variables.
A written estimate from us is line-item, upfront, and fixed: the number you see is the number you pay, with no change orders sneaking in. Included are demo, haul-off, materials, post setting, and final walkthrough. What’s not typically included: permits if your property requires one, and any repair to stucco or grading uncovered during demo, which we quote separately before touching it.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to an Aluminum Fence
Daly City is built almost entirely on wind-blown sand dunes and steep fog-belt slopes of San Bruno Mountain’s western flank, and that combination shapes every fence job here. Post depth, footing width, and how we handle hillside runoff aren’t optional details; they’re the job. On the steep streets above the Mission Street corridor, we routinely hit sandy fill where a shallow footing from the old fence simply didn’t hold, and we engineer around it.
The housing stock matters too. Most Daly City properties we work on are post-WWII stucco-over-wood-frame homes from the 1940s through the 1960s, many on poured slab foundations set into graded hillside cuts. Thick lots are rare. When a fence run butts against an old stucco wall, that’s where the persistent Pacific fog and onshore wind have been working on moisture intrusion for decades, and we flag anything soft or cracked before we set a post against it.
The marine layer also zaps a gate’s alignment and finish faster here than in South San Francisco or Burlingame, so we spec coastal-rated coatings on the west-facing runs and set hardware with expansion in mind. Permits run through the city’s building department and we pull them where your property requires it; inspections are handled through the same process. Our Daly City service area covers these hillside and flatland properties the same way.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Daly City
Most residential runs take two to five working days once materials arrive. Hillside jobs and multi-gate installs push toward the longer end because post setting in sand takes more time. Call (833) 997-7759 for a firm timeline based on your property.
Many residential fences don’t require a permit if they’re within height limits, but steep lots and certain easements do. We check the requirements for your address and pull the permit if it’s needed, so you’re not guessing. Call (833) 997-7759 and we’ll confirm for your property.
Yes, in the vast majority of cases. Fence lines follow property boundaries, not utility corridors, and our mark-out step before digging ensures we avoid buried lines. If your line crosses something buried, we adjust the layout rather than cut into it. Call (833) 997-7759 for a free estimate.
Most jobs run $4,000 – $10,000, with the broader range of $3,500 – $9,000 for straightforward residential runs. Terrain, footage, and finish grade move the number more than anything else. Call (833) 997-7759 for an exact written quote, free of charge.
Every install carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a post shifts or a gate misaligns within that window, we make it right. Call (833) 997-7759 to schedule your estimate.
Get a Free Aluminum Fence Estimate in Daly City
If you’re ready to price an aluminum fence for your Daly City property, call (833) 997-7759 for a free on-site estimate. We’ll walk the property, check the grade and soil conditions, lay out the run with you, and hand you a written line-item quote with no surprises. A live person answers the phone, day or night, and the estimate costs you nothing. Reach out today to get your project on the schedule.
Written by the team at Groundwork Construction Co.