Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Burlingame, CA: What It Costs and How It Goes In
A vinyl fence in Burlingame typically runs $3,500 to $9,000 for a standard side or backyard run, and most jobs are finished in three to five working days once the permit clears. That range covers removal of the old fence, new posts set in concrete, panels, caps and gates. The number that lands in your quote depends on linear footage, grade, height, and how buried the old footings are. Call (833) 997-7759 and we’ll talk through your yard before anyone climbs into a truck.
Key takeaways
- Most Burlingame vinyl fence projects land between $3,500 and $9,000.
- Posts set in concrete on day one, panels and gates by day three.
- Burlingame’s damp winters and coastal fog are the enemy of cheap vinyl – grade matters here.
- A permit is usually required; we handle it as part of the job.
How a vinyl fence actually gets built, stage by stage
Fence work looks simple from the street. Underneath, it’s the post set that decides whether the fence is straight in six years or leaning. Here’s the sequence we run on every vinyl job in Burlingame.
Stage 1 – On-site estimate and line layout. We walk the property line with you, confirm where the fence should sit relative to the survey or your neighbor’s existing fence, and measure the total run. Day one decision: exact footage, gate placement, and fence height (6 ft is standard, 4 ft for front-yard runs where visibility rules apply).
Stage 2 – Utility locate and permits. Before we dig, we call for a utility locate – Burlingame yards almost always have irrigation, gas, and low-voltage lines underneath the fence line. We pull the fence permit from the city at the same time. This stage usually takes three to seven business days, mostly waiting on the city.
Stage 3 – Demo and post setting. Old fence comes down on day one of the build. We dig post holes to depth – typically 24 to 30 inches in Burlingame’s clay-heavy soil – and set each post in concrete. Posts cure overnight. This is the stage that determines the fence’s life, and it’s the stage cut-rate crews skip.
Stage 4 – Panels, gates, and caps. Day two and three are panel install, gate hanging, and post caps. You’ll want to be home for the gate swing check – the gate should clear the ground by about an inch and swing with one finger.
Stage 5 – Final walkthrough and clean-up. We walk the whole run with you, check every post for plumb, confirm the gate latches, and haul away all old fencing and spoil. We finish with a written record of the job under our 730-Day Done Right Promise – if anything shifts or fails in that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Vinyl isn’t one product. It’s a family of grades and styles, and the choice at each fork is where budget meets long-term performance. Burlingame’s fog and damp winters make the material choice more consequential than it would be in a dry climate.
- Standard virgin vinyl vs. recycled-content: Virgin vinyl resists UV yellowing much longer. Recycled-content panels cost 15 – 20% less and show chalky fading sooner. On a Burlingame lot with morning moisture most days, we usually steer homeowners to virgin vinyl.
- Privacy panel vs. picket vs. semi-privacy: Full privacy (6 ft solid) runs at the top of the range. Picket is 25 – 30% cheaper but offers no screening. Semi-privacy (with a lattice or top-gap design) splits the difference.
- Post reinforcement: Standard posts are fine on flat, protected runs. On a run exposed to bay wind or on a slope, steel-reinforced posts add roughly 10 – 15% and dramatically extend the fence’s life against lean.
- Color and texture: White is cheapest and most common. Woodgrain finishes and darker colors (tan, gray, black) cost more and look better against Burlingame’s Craftsman and Tudor homes. Some darker finishes do show more heat warping in full sun.
- Gate type: A standard swing gate is included in most quotes. A wider double gate or a self-closing gate adds cost and hardware.
What a vinyl fence costs in Burlingame, CA
Our Burlingame vinyl fence price range is $3,500 to $9,000. Here’s what pushes a job toward the low or high end.
| Factor | Pushes low | Pushes high |
|---|---|---|
| Linear footage | 60 – 80 ft (side yard) | 150 – 200 ft (full perimeter) |
| Grade and style | Standard privacy, white | Woodgrain, semi-custom, reinforced posts |
| Site conditions | Flat, easy dig, clear line | Slope, roots, buried concrete |
| Old fence removal | Simple wood fence | Concrete-set posts or masonry |
| Gates | One standard gate | Two gates or a wide double gate |
A written estimate from us lists footage, panel count, post count, gate count, permit cost, and demo as separate line items – the number you see is the number you pay. It does not include re-sodding or landscaping restoration (we can price that separately if you want it), and it does not include any fence work on a neighboring property unless you ask us to quote both sides together.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame yards and rules do to this specific job
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and the fence rules here reflect that. In Burlingame Park and Easton Addition, homes from the 1910s through the 1940s sit on narrow lots with tight side setbacks. A 6-foot privacy fence often hits the height-limit review at the front-yard transition line, so we routinely design a shorter front-yard run (4 ft) that steps up to 6 ft at the side-yard line. That stepped design isn’t a workaround – it’s the right answer for the lot, and it keeps the fence out of the design review treadmill.
The soil matters too. Burlingame’s clay-heavy soils plus the persistent morning fog and damp winters mean posts set too shallow will lean within two or three seasons. We set every post at 24 to 30 inches with concrete and check plumb on the second day. On older homes where the previous fence was set in shallow footings or attached directly to a retaining wall, we’ll rebuild the footing rather than tie new posts to something that’s already failing. If the fence line overlaps with an old, heaved walkway or a sagging driveway edge, homeowners often pair this with Driveway Repair & Replacement in Burlingame while we’re already on site – or with Asphalt Driveways & Resurfacing in Burlingame when the driveway is the bigger priority.
We cover the full Burlingame area, ZIPs 94010 and 94011, from the flatlands down through Burlingame Park and Easton Addition. If the fence is part of a larger exterior project, it makes sense to look at the whole scope at once – our Fence Installation in Burlingame page covers the full range of fence work we do here, and our Fence Installation service page rounds out the picture.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vinyl Fence in Burlingame
Most Burlingame vinyl fence jobs take three to five working days once the permit is issued. The permit itself usually adds three to seven business days. Post setting on day one, panels and gates by day three, and a walkthrough on the last day – call (833) 997-7759 for a timeline tailored to your yard.
Yes, most vinyl fence installations in Burlingame require a permit, particularly anything over 4 feet tall or fronting a public street. Height limits vary by setback and street frontage. We handle the permit application and inspection as part of the job – call (833) 997-7759 and we’ll confirm what your specific lot needs.
In most cases yes, with care. We call for a utility locate before digging and hand-dig around irrigation lines. If a sprinkler line runs directly through a post location, we reroute it and mark the change on your final walkthrough. Call (833) 997-7759 to walk your yard with us before we set a date.
Vinyl fence installation in Burlingame runs $3,500 to $9,000, with the exact figure driven by footage, style, site conditions, and the number of gates. A written line-item estimate is free. Call (833) 997-7759 for yours.
All our work carries the 730-Day Done Right Promise – if anything shifts, cracks, or fails within that window, we come back and make it right. The vinyl panels themselves also carry the manufacturer’s warranty, which varies by brand and grade. Call (833) 997-7759 for the material warranty on the specific grade you choose.
Get a free on-site estimate for your vinyl fence in Burlingame
Call (833) 997-7759 and a live person will pick up – any hour, any day. We’ll set a time to walk your property, measure the run, and put a written line-item estimate in your hands. No pressure, no surprise change orders, no guessing on the permit. If the fence is part of a bigger exterior plan, ask about our Fence Installation in Burlingame work while we’re on site. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.