A Groundwork company - serving Oakland, CA
Iron Fence in Burlingame, CA | Groundwork Construction Co. of Oakland

Iron Fence in Burlingame - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Burlingame, CA: What It Costs and What the Job Actually Involves

A wrought iron fence in Burlingame typically runs $3,500 to $9,000 for a residential front or side-yard run, and most installs take two to four working days once the fence is fabricated. The number that matters most here is salt. Burlingame sits between the bay and the coastal hills, and the damp, fog-heavy air corrodes steel fasteners, hinges, and weld points years before inland customers ever see it. Call (833) 997-7759 for a free on-site estimate.

Call (833) 997-7759

Day by Day: How We Build an Iron Fence Here

Iron work is unforgiving of shortcuts. A fence that starts corroding at the base in four years was almost always set wrong on day one. Here’s the sequence we run.

Stage 1 – Site walk and layout (about 1 to 2 hours, day 1). We mark the property line, check for buried irrigation, low-voltage lighting, and gas or electrical runs before anyone digs. On Burlingame’s narrower lots, the set-back line between you and your neighbor is often ambiguous, so this is where you decide the exact run and gate swing. A survey is worth having if the line is contested.

Stage 2 – Footings and posts (day 1 into day 2). We dig post holes to depth, pour concrete footings, and set the posts plumb with proper drainage at the base of each one. Water pooling around a post is what kills iron fences on the Peninsula; we set footings so water sheds away and cap the post tops. Concrete needs about 24 hours to cure before we load the fence, so this is the quiet day.

Stage 3 – Fabrication and dry fit (day 2). Panels, rails, and pickets get laid out and checked against the actual site. Slopes are common on Burlingame’s older lots, and a racked panel on a grade looks wrong fast. You confirm picket spacing, height, and finish color at the dry-fit, before anything is permanently fastened.

Stage 4 – Installation (day 3). Panels go up, gates are hung and adjusted, and every fastener gets torqued. This is also where we confirm the gate hardware is stainless – hinges and latches are the first things to seize in coastal air.

Stage 5 – Finish coat, touch-up, and walkthrough (day 3 into day 4). We touch up weld points and any scratches from installation, check the gate swing, and walk the run with you. Anything that needs attention gets noted and handled before we call the job done.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Cast Iron, Wrought Iron, or Steel: The Honest Trade-Offs

What gets sold as “iron” today is usually one of three things. Each has a real place, and the choice drives both cost and how long the fence holds up in Burlingame’s damp air.

  • True wrought iron: the traditional option, hand-forged and heavy. It suits period homes well, but it’s the most expensive per linear foot and needs re-painting every few years to stay ahead of rust. Best for historically sensitive properties.
  • Cast iron: heavier and more ornate, with decorative castings. Beautiful on a Craftsman or Spanish Colonial Revival facade, but brittle if struck and costly to repair. Suits a formal front yard, less so a busy driveway edge.
  • Powder-coated steel or aluminum: the practical choice for most Burlingame lots. Lighter, lower cost, and the factory finish resists corrosion far better than site-painted iron. Aluminum won’t rust at all; steel with a good powder coat holds up well if the fasteners are also protected. Specify stainless or coated hardware either way.

Finish matters as much as metal. A galvanized or zinc-rich primer under the topcoat is what keeps salt air from finding bare steel. Spec it in writing. Nylon or stainless rollers and gate hardware are worth the small upgrade.

What an Iron Fence Costs in Burlingame, CA

Expect $3,500 to $9,000 for a typical residential iron fence in Burlingame. A short side-yard run lands near the bottom; a full front perimeter with a driveway gate and decorative panels pushes to the top and beyond. Here’s what moves the number:

  • Linear footage and height: the single biggest factor. A 40-foot run at 4 feet tall is a very different job from 120 feet at 6 feet.
  • Material grade: powder-coated aluminum sits at the low end, true wrought iron at the high end, with steel in between.
  • Gates: a standard walk gate is one price; a wide driveway gate with proper posts and hardware is another.
  • Site conditions: slopes, rock, tree roots, and tight access all add labor. Burlingame’s narrow lots and mature landscaping often mean hand-digging near the property line.
  • Permits: fences over a certain height or near a corner may need a permit and a survey; that gets quoted separately and pulled before we dig.

A written estimate itemizes posts, panels, gates, hardware, finish, and permit fees. It won’t include a survey if one turns out to be needed, or repairs to a damaged existing retaining wall the fence would sit on. We price it so the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Burlingame’s Old Lots Change This Job

Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and much of the housing stock in Burlingame Park, Downtown, and Easton Addition dates to the early 1900s through the 1940s – Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages. That history shows up in fence work. Property lines on these narrow lots are often a few inches off from where a homeowner assumes, original surveyed corners are missing, and a new iron fence that respects the neighboring setback can need a survey before we set a single post. The historic-preservation scrutiny that governs additions and second stories rarely applies to a fence outright, but a period-appropriate design reads better on Easton Addition and Burlingame Park homes and is worth planning for. This is part of the wider scope we cover under Fence Installation in Burlingame, and the coastal failure pattern is real: we routinely see gate hinges seizing and post bases rusting within four to six years on fences set without stainless hardware and drainage.

The climate does the rest. Cool, fog-influenced summers and damp winters mean persistent morning moisture on metal. Proper footings that shed water, capped posts, stainless hardware, and a galvanized primer are what buy the extra years.

Serving Burlingame, CA – Our Local Coverage Area

We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Burlingame

Get a Free Iron Fence Estimate in Burlingame

Call (833) 997-7759 for a free on-site estimate on your iron fence in Burlingame. A live person answers 24/7, and we’ll walk the property line with you, talk through material and finish, and hand you a written line-item quote – posts, panels, gates, hardware, finish, and permits spelled out. No change orders, no surprises. If you’re also refreshing the hardscape, homeowners often pair this with Patios, Walkways & Pool Decks in Burlingame, and larger lot plans sometimes fold in ADU Design & Permitting in Burlingame. Our fence installation service covers the full range, and we work across Burlingame.

Written by the team at Groundwork Construction Co.

Why Burlingame Chooses Groundwork Construction Co. of Oakland

We set the standard for iron fence in Burlingame.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burlingame

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Burlingame Customers Say

Trusted by homeowners across Burlingame and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Iron Fence in Burlingame?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Burlingame.

(833) 997-7759

Request a Free Estimate in Burlingame

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch