Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in South San Francisco, CA: What the Job Actually Involves
An iron fence in South San Francisco usually runs $4,130 to $10,620 for a typical residential lot, and most jobs take 2 to 4 days from dig to final walkthrough. That range covers material, fabrication, footings, and cleanup for a standard front or side-yard run. Call (833) 997-7759 to schedule a free on-site estimate. We’ll measure the property line, check for utility conflicts, and put a fixed number in writing before any hole gets dug.
How We Build an Iron Fence, Stage by Stage
An iron fence isn’t a stock product you unload from a truck. It’s fabricated to the lot. That changes the schedule, and it’s worth knowing where your decisions land before the crew shows up.
- Day 1: Site visit and layout. We walk the property line with you, confirm where the fence actually goes, and mark post locations. This is when we find the things that matter: buried irrigation, an old concrete mow strip, a property line that doesn’t match the plat. On the tight lots common west of Highway 101, we also work out how a truck and the fabrication materials reach the work area without blocking a shared driveway.
- Day 1 – 2: Demolition and prep. If an old fence comes out, that’s half a day for a standard run. Then we set string lines and dig footings. In South San Francisco’s clay-heavy flatland soils, posts go deeper than they would in sandy Peninsula ground, and we set them in concrete rather than dry-packed. Digging typically takes a full day for a 100-foot run.
- Day 2: Footings cure. Concrete needs time. We won’t hang panels on green footings just to save a day. This is the stage most homeowners underestimate, and it’s the one that decides whether the fence stays plumb in five years.
- Day 3: Fabrication and install. Posts get set, rails get leveled, pickets and panels go on. If you’re adding a gate, it gets hung and swing-tested here. Expect a full day for a typical residential run.
- Day 3 – 4: Finishing and inspection. Touch-up on welds and finishes, gate hardware adjusted, site cleaned. If the job touches a right-of-way or triggered a permit, we schedule the inspection and walk it with you. You decide gate hardware and finish color at the estimate, not on install day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every iron fence quote comes down to four or five real decisions. Here’s what each one does to the price and how it holds up.
- Wrought iron vs. steel. True wrought iron is hand-forged and priced accordingly. Most residential jobs use galvanized steel, which gives you the same look with better rust resistance at a lower cost. We’ll tell you which one your budget actually buys.
- Powder coat vs. painted finish. Powder coat is baked on and lasts far longer in damp coastal air. Painted finishes let you match a specific color but need touch-ups every few years. In the fog belt, powder coat wins on maintenance.
- Picket spacing and height. Tighter spacing and taller panels cost more per linear foot but give you the security and privacy most homeowners want. Standard spacing is fine for boundary marking; dense spacing is what you want for a pool barrier or a security line.
- Gate style and automation. A manual walk gate is inexpensive. A driveway gate with an opener needs a power run, a safe clearance check, and rolling-code remotes so the signal isn’t cloned. That’s a meaningful cost jump, but it’s the detail that matters on a tight South San Francisco lot where the driveway gate is your main access point.
- Footing depth and soil. Deeper footings, concrete collars, or extra bracing add cost but are non-negotiable on unstable ground. This is where a cheap quote turns expensive later.
What Iron Fence Costs in South San Francisco, CA
Plan on $4,130 to $10,620 for a residential iron fence here. A short side-yard run lands near the low end. A full property perimeter with a driveway gate and automation pushes the high end.
| Line item | Typical range |
|---|---|
| Material and fabrication (per linear foot) | $35 – $75 |
| Footings and post setting | $900 – $2,400 |
| Gate (manual walk gate) | $600 – $1,800 |
| Driveway gate with opener and remotes | $2,500 – $6,500 |
| Old fence removal | $400 – $1,200 |
| Permit (if required) | $150 – $600 |
What moves the number: linear footage, soil conditions, whether an old fence comes out, gate complexity, and finish grade. A written estimate lists material specs, footage, gate hardware, and disposal. What it typically doesn’t include is utility relocation if we hit something unmarked, or a structural repair the old fence was hiding. We flag both before work starts, not after. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat South San Francisco Specifically Does to This Job
South San Francisco is the Industrial City, and that shapes fence work here in ways a generic Peninsula quote misses. A large share of construction in South San Francisco is commercial and life-science driven: cleanroom build-outs, tenant improvements, and code-heavy facility work near the Genentech campus and the logistics corridors east of Highway 101. That means inspection schedules and permit desks here are busy and commercial-weighted, and a residential fence permit can sit behind a stack of lab and warehouse submittals if it isn’t submitted correctly the first time.
On the housing side, the stock west of the 101 is pre-war and mid-century single-family, much of it with unpermitted additions and cast-iron drains, plus newer townhomes and podium apartments along El Camino Real and the Caltrain corridor. Those townhome lots mean tight clearances and shared driveways; we plan truck access and material staging around that. The flat industrial land east of 101, built on bay fill and former salt ponds, has high water tables and liquefaction-prone soils, so posts there need deeper footings than a hillside lot west of El Camino. And the fog belt brings persistent onshore wind and damp air, which is why powder coat and galvanized steel outperform painted finishes. If you’re rebuilding a boundary as part of a wider Fence Installation in South San Francisco project, or pairing the fence with Patios, Walkways & Pool Decks in South San Francisco, we scope both so the fence footings and the hardscape don’t fight each other. For a rear-lot structure, homeowners often pair this with ADU Design & Permitting in South San Francisco, and we coordinate that early since setback lines affect where the fence can run. Our Fence Installation service covers every material; this page stays on iron because that’s the job you searched. We cover all of South San Francisco, ZIPs 94080 and 94083 included.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Iron Fence in South San Francisco
Most residential iron fences take 2 to 4 days, with footings curing as the longest single wait. Tight townhome lots and concrete removal can add a day. Call (833) 997-7759 for a schedule based on your actual property.
Front-yard and street-facing fences, and anything over a certain height, typically require a permit; side and rear fences often don’t. Rules vary by zone and whether you’re in a right-of-way, so we check before quoting. Permits, when required, get pulled and inspected. Call (833) 997-7759 and we’ll tell you what your lot needs.
Yes, in most cases. We use a utility locate before digging and hand-dig near known lines, so the disruption stays minimal. If a line sits exactly on the fence line, we flag it at the estimate rather than discovering it mid-dig. Estimates are free, so call (833) 997-7759.
Residential iron fence in South San Francisco runs $4,130 to $10,620, depending on footage, gate type, and soil. A written, line-item quote gives you the real number. Call (833) 997-7759 for an exact quote, estimates are free.
Workmanship is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties depend on the finish and system you choose, and we spell those out in the quote. Call (833) 997-7759 with questions.
Get a Free Iron Fence Estimate in South San Francisco
Book a free on-site estimate for your iron fence in South San Francisco by calling (833) 997-7759. On the call, we confirm your address and lot type, set a visit time, and come out to measure the line, check utility locates, and talk through gate and finish options. You leave with a written, line-item number and no obligation. Calls are answered by a live person, around the clock.
Written by the team at Groundwork Construction Co.