Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Burlingame, CA: What the Job Actually Takes
A paver driveway in Burlingame runs $7,000 – $18,000 for most residential lots, and a typical project takes five to nine working days from demo to the last swept joint. That covers excavation, a compacted base, edge restraint, and the finished surface. Call (833) 997-7759 and a live person answers, day or night, to set up a free on-site estimate. The number that matters here isn’t the headline range; it’s what your specific lot, slope, and drainage situation adds or subtracts from it.
How We Build a Paver Driveway, Stage by Stage
A paver driveway is mostly the work you never see. The surface goes down fast. The base is where the money and the days go. Here’s the sequence we follow on a Burlingame job.
Stage 1: Site visit and layout (half a day)
We measure the drive, check the existing slope toward the street or a drain, and confirm where utilities run. You decide the paver pattern, color family, and whether you want a border course. On narrow Burlingame lots, the turning radius for a car matters more than people expect, so we walk it with you before anything gets ordered.
Stage 2: Demolition and haul-off (one to two days)
Existing concrete, asphalt, or old pavers come out, along with enough subgrade to hit the depth the new base needs. Haul-off of the old material is included in the written quote, not billed later. If we hit a root or a buried utility line, you hear about it the same day, before we keep digging.
Stage 3: Grading and base prep (two to three days)
We cut the subgrade to slope, lay geotextile fabric to keep soil from working up into the base, then place and compact the aggregate base in lifts. Each lift gets compacted before the next goes on. This is the stage that prevents settling, and it’s the one a rushed crew skips. You’ll see the drive at its lowest point for a day or two and wonder if we’re on schedule. We are.
Stage 4: Edge restraint and bedding course (one day)
Concrete or plastic edge restraint gets pinned along the sides so the pavers can’t spread under load. Then a thin, screeded sand bedding course goes down and we set the pattern.
Stage 5: Cutting, compaction, and joint sand (one to two days)
Field cuts at the edges, one more pass with a plate compactor over the finished field, then polymeric joint sand swept in and watered to set. You can park on it when we’re done. It’s part of a full Driveway & Pavers in Burlingame scope if you’re also redoing walks or an apron, and we schedule those together so the equipment shows up once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Most of the decision comes down to four choices. Here’s the honest trade-off on each, not just the sales sheet version.
- Concrete pavers vs. clay brick: Concrete pavers are the value pick and hold color well through Peninsula fog and damp. Clay brick runs higher and wears into a warmer look, but it takes more cutting time and can chip on a tight turn. On a Burlingame lot of any age, brick reads as period-correct.
- Base thickness: A drive that only holds passenger cars needs less base. If a work truck, RV, or heavy delivery traffic uses it, the base goes deeper and the cost climbs. Tell us now, not after.
- Permeable vs. standard system: Permeable pavers drain through open joints into a stone reservoir below, which helps where runoff has been an issue. They cost more up front and need periodic vacuuming to stay open.
- Pattern and border: A running-bond field with a contrasting soldier-course border is the classic choice. Herringbone resists shifting better under turning wheels. Decorative borders add cutting labor and material waste.
Pavers set in polymeric sand are the standard for a drive, because the sand locks joints and resists washout in wet winters. We work with Belgard hardscape products and match grades to the load, not to whatever’s stacked in the yard.
What Paver Driveways Cost in Burlingame, CA
Expect $7,000 – $18,000 for a paver driveway installation here. The exact number depends on the variables below, and a written line-item estimate shows every one of them before we break ground.
| Item | Typical range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Full driveway replacement (demo included) | $5,000 – $14,000 |
| Paver patio (often paired) | $3,500 – $11,000 |
What pushes a job to the high end: a long or steep drive, heavy base excavation, removing and hauling old concrete, upgraded or permeable paver systems, and complex patterns with lots of cuts. What keeps it at the low end: a modest single-car drive, existing base in usable shape, and a simple field pattern. Upfront pricing, no surprises means the number we quote is the number you pay. That’s backed by our 730-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to This Job
Burlingame’s core is early-1900s through 1940s single-family housing, and that shapes driveway work in ways a newer suburb never tests. In Easton Addition and Burlingame Park, drives are often narrow, the lots tight, and the original approach aprons were poured to a slope that never had to meet a modern drainage standard. Pouring or laying new surface over a failing apron just moves the problem downstream, so we check and rebuild the apron where it matters. The bay-to-hills climate is the other factor. Fog-influenced summers and damp winters with persistent morning moisture mean the base has to drain and the edges have to hold; a paver drive on a Peninsula lot lives in wet ground more than it lives in dry. Older homes here also sit on pier-and-beam or raised foundations with shallow setbacks, so we confirm utility depths and the location of any old drain lines before we cut subgrade. Where a lot carries historic-preservation scrutiny, we match driveway materials and elevations to the streetscape. We cover all of Burlingame and the surrounding Peninsula, including ZIP codes 94010 and 94011.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Burlingame
Most Burlingame paver driveways take five to nine working days, with base prep taking as long as the pavers themselves. Add a day or two if old concrete needs heavy haul-off. Call (833) 997-7759 for a schedule based on your lot.
A paver driveway on an existing footprint usually doesn’t need a building permit, but changing the curb cut, the driveway width, or how runoff leaves the property can bring the city’s review into play. We check what applies to your address before we start and note it in the estimate. Call (833) 997-7759 to talk through your specific case.
Sometimes yes: if the old surface is stable and the base under it is sound, pavers can go over a properly prepared topping. More often the base needs rebuilding, and laying over a failing slab just transfers the failure. We tell you which case you’re in after we look at the subgrade.
Paver driveways in Burlingame typically run $7,000 – $18,000, and the biggest drivers are size, base depth, and what gets hauled away. Call (833) 997-7759 for an exact written quote – the estimate is free.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Our technicians have up to 12 years of experience, so the base gets built to stay put.
Get a Free Paver Driveway Estimate in Burlingame
Call (833) 997-7759 for a free on-site estimate on paver driveways in Burlingame. A live person answers around the clock, and we’ll look at the drive, the slope, and the base, then hand you a written line-item quote with the paver choices laid out. Many homeowners pair the driveway with ADU Design & Permitting in Burlingame, and it’s also worth noting that Garage Conversion ADU in Burlingame work and our Driveway & Pavers service often come up in the same conversation about an older home’s exterior.
Written by the team at Groundwork Construction Co.