A Groundwork company - serving Oakland, CA
Asphalt Driveways & Resurfacing in Burlingame, CA | Groundwork Construction Co. of Oakland

Asphalt Driveways & Resurfacing in Burlingame - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Asphalt Driveways & Resurfacing in Burlingame, CA: What It Takes and What It Costs

Asphalt driveways & resurfacing in Burlingame, CA typically run $3,500 – $9,000 for new asphalt paving or $5,000 – $14,000 for a full driveway replacement, depending on length, slope, drainage, and how much of the old surface has to come out. Most residential jobs take two to four working days on site, plus a cure window before you park on them. Call (833) 997-7759 and we’ll put an exact number in writing before anyone touches the driveway.

Call (833) 997-7759

From tear-out to cure: how an asphalt driveway actually gets built here

Asphalt work looks simple from the sidewalk. Underneath, it’s a sequence where every stage depends on the one before it, and rushing a step is how driveways fail inside five years. Here’s the real order of operations on a Burlingame job.

Day 1 morning: layout, saw-cut, and demolition

We mark the new footprint against the property line and the garage apron, then saw-cut the perimeter so the edges are clean rather than crumbled. The old asphalt, concrete, or gravel comes out, and we haul it same day. This stage runs four to seven hours on a standard two-car drive. You decide the final width and whether you’re keeping the existing curb cut.

Day 1 afternoon: subgrade prep and grading

This is the stage nobody photographs and everything depends on. We grade the exposed base to fall water away from the garage, compact it in lifts, and check the slope with a level. Soft spots from old tree roots or buried debris get dug out and rebuilt with aggregate base. On a Burlingame lot, this is also where we discover whether the old driveway was draining toward the house – a problem worth fixing now, not after the new asphalt hides it.

Day 2: base rock and compaction

Class II aggregate base goes down in layers, usually four to six inches for a residential drive, each layer watered and compacted before the next. The thicker the base, the longer the driveway lasts, and this is where a cheap bid shows itself. We’ll show you the base depth before the asphalt covers it.

Day 3: asphalt placement and rolling

Hot-mix asphalt arrives by truck and gets laid with a paver, then rolled while it’s still hot. Residential driveways go down two to three inches compacted. The crew finishes the edges by hand and shapes the transitions at the garage apron and street apron. Placement takes three to five hours for most Burlingame driveways, and it’s weather-dependent – asphalt won’t go down in rain or on a wet base.

Days 4 onward: curing and the seal coat decision

Asphalt cures over weeks, not days. You can walk on it after 24 to 48 hours and park on it after about 72, but it stays soft in warm weather for the first month or two. A seal coat is usually scheduled 6 to 12 months out, once the asphalt has fully cured and the surface oils have weathered off. Sealing too early traps moisture and causes the exact cracking you were trying to prevent.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The choices you’ll actually make on a Burlingame driveway

Most of the decision-making happens before day one. These are the forks in the road we walk through with you.

  • Resurface over the existing asphalt vs. full replacement. An overlay is cheaper and faster, but only works when the base is sound and the existing surface isn’t badly cracked or heaved. If the base is failing, an overlay just transfers the failure upward within a couple of years. Around here, we lean toward replacement on drives over 25 years old.
  • Asphalt thickness. Two inches compacted is the residential minimum; three inches holds up better under heavier vehicles and on steeper grades. The price difference is modest and worth it on long or sloped driveways.
  • Base depth and compaction. Four inches of base is a light-duty drive; six is proper for anything that sees regular truck traffic or heavy clay soils. This is the single biggest predictor of longevity.
  • Edge treatment. Asphalt needs a physical edge to hold it. That means an existing concrete curb, a new concrete or paver border, or a properly compacted shoulder. On narrow Burlingame side lots, a paver border often does double duty as a clean finish line and structural restraint.
  • Drainage solutions. Channel drains, a slight crown, or a trench drain at the garage apron. If your current driveway floods the garage every winter, this is the stage where that gets solved.
  • Sealer type down the road. Water-based sealers are the common residential choice and last two to three years; coal-tar-based products are largely restricted in California and we don’t use them.

What asphalt driveways & resurfacing cost in Burlingame, CA

For most Burlingame homes, a new asphalt driveway lands between $3,500 and $9,000, and a full tear-out and replacement runs $5,000 to $14,000. A follow-up seal coat is typically $250 to $700. That’s the honest spread – here’s what pushes a job toward one end or the other.

  • Square footage and length. A short single-car apron off a Burlingame Park alley is a different job from a long drive up a sloped Easton Addition lot.
  • Existing condition and demolition. Thick old concrete under old asphalt adds hauling and demo hours. So do tree roots that need grubbing out.
  • Base rebuild. Sound base keeps you near the low end. Failing base, poor drainage, or a soft subgrade pushes the number up because it means digging deeper and importing more rock.
  • Drainage work. Adding a trench drain, a channel drain, or regrading to move water away from the garage carries its own line item.
  • Access and slope. Tight side yards, low overhead clearance, and steep grades slow the crew down and sometimes require smaller equipment.

A written estimate from us itemizes demolition, hauling, base depth, asphalt thickness, edge treatment, and any drainage work. What it won’t include is the optional seal coat months later, or any repairs to the garage apron slab if it’s cracked underneath. Those come up front, not as surprise change orders after the asphalt is down.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Burlingame itself does to an asphalt job

Burlingame’s damp winters are the whole story with asphalt. Sitting between the bay and the coastal hills, the city gets cool, fog-heavy summers and persistent morning moisture through the winter, and that combination punishes a driveway that doesn’t drain properly. Water is what kills asphalt – it gets into hairline cracks, freezes and thaws, and the crack grows into alligatoring. Which means the drainage and grading work under the surface matters more here than it would in a drier climate.

The housing stock shapes the job too. Most of the homes we work on in Burlingame Park, the Easton Addition, and around the Downtown neighborhoods are early-1900s through 1940s single-family houses – Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages. Many have narrow lot setbacks, mature street trees with roots under the existing driveway, and older garages set close to the property line. When we tear out a driveway on one of these lots, we’re often rebuilding the transition at the garage apron because the original was poured at a different grade. And in Burlingame, exterior work sits under real design review, so if your driveway project ties into a larger yard or addition scope, that approval is part of the schedule. If your plans run beyond the driveway, we handle that as part of a full Driveway & Pavers in Burlingame scope, and homeowners often pair this with a New Detached ADU in Burlingame when they’re reworking the back of the lot at the same time.

Asphalt driveways & resurfacing in Burlingame: common questions

How long does an asphalt driveway take in Burlingame?

Most residential jobs take two to four working days on site. Prep and base work usually take the first day or two, asphalt placement the next, and then you’re waiting 24 to 48 hours to walk on it and about 72 before parking. Rain in the forecast can push everything back, since asphalt won’t go down wet. Call (833) 997-7759 for a schedule estimate on your specific driveway.

Do I need a permit to resurface my driveway in Burlingame?

A straight resurface or replacement in the existing footprint often doesn’t require a building permit, but widening the driveway, changing the curb cut, or altering drainage can trigger one, and any project that touches the public sidewalk or street apron needs city sign-off. That’s why we check the scope against the city’s requirements before work starts. Call (833) 997-7759 and we’ll tell you what your job needs.

Can you resurface over my existing asphalt, or does it have to come out?

An overlay works when the base is solid and the surface is only lightly cracked – otherwise you’re paying twice. The deciding factor is underneath: we look for rutting, alligator cracking, and heaved sections, and if those are present, a full replacement is the honest answer. Call (833) 997-7759 and we’ll give you a straight read on which one your driveway needs.

What does an asphalt driveway cost in Burlingame, and will the price change once work starts?

Expect $3,500 – $9,000 for new asphalt paving and $5,000 – $14,000 for a full replacement, with a seal coat at $250 – $700 later. Our pricing is upfront and the number in the written estimate is the number you pay – if the base turns out worse than expected, we tell you before we proceed, not after. Call (833) 997-7759 for a free estimate.

What kind of warranty comes with the work?

Every asphalt driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship on prep, grading, base, and placement, and you get it in writing. Call (833) 997-7759 to schedule a free on-site estimate.

Serving Burlingame, CA – Our Local Coverage Area

We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Get a written asphalt driveway estimate for your Burlingame home

We’ll come out, walk the driveway, check the base and drainage, and hand you a written, itemized estimate covering demolition, base depth, asphalt thickness, edge treatment, and any drainage work – the whole job, no surprises. No change orders after the fact, and a 730-Day Done Right Promise behind the work. Call (833) 997-7759 to schedule your free estimate.

Written by the team at Groundwork Construction Co.

Why Burlingame Chooses Groundwork Construction Co. of Oakland

We set the standard for asphalt driveways & resurfacing in Burlingame.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burlingame

Getting your asphalt driveways & resurfacing project started is simple.

1

Call or Request a Free Estimate

Tell us about your asphalt driveways & resurfacing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local asphalt driveways & resurfacing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Burlingame Customers Say

Trusted by homeowners across Burlingame and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Asphalt Driveways & Resurfacing in Burlingame?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Burlingame.

(833) 997-7759

Request a Free Estimate in Burlingame

Tell us about your asphalt driveways & resurfacing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch