Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Design & Permitting in Burlingame, CA: What It Takes and What It Costs
ADU Design & Permitting in Burlingame runs $45,000 – $130,000 for the design-and-permit portion of a project tied to a full accessory unit build, and the design and entitlement phase alone usually takes 4 – 7 months before a shovel touches the ground. The number moves with lot constraints, historic review, and how much of the existing structure you’re reworking. Call (833) 997-7759 to schedule a free on-site estimate and we’ll walk your property line by line before you commit to anything.
How the design-and-permit process actually runs, stage by stage
Most homeowners picture a set of drawings and a stamp. In Burlingame it’s a sequence with real decision points, and knowing them ahead of time is the difference between a five-month entitlement and a nine-month one. Here’s the order we work in.
Stage 1: Site survey and feasibility (week 1 – 2)
We measure the lot, check setbacks against your zoning, and confirm what the existing foundation and utilities can support. You decide the unit type you’re pursuing, and we tell you honestly whether the site clears the basic thresholds before anyone draws a line. This is where most bad projects get caught early.
Stage 2: Schematic design and your layout sign-off (week 3 – 6)
We produce floor plans and elevations at a scale you can read. You choose the unit size, entry position, and whether it’s attached or detached. This is the stage where a 500 sq ft plan quietly becomes a 750 sq ft plan, so we hold you to a budget target before the drawings get detailed.
Stage 3: Design review and historic scrutiny (week 6 – 12)
Burlingame scrutinizes additions and new structures more closely than most Peninsula cities, and this is where the schedule can flex. We prepare the submittal package and respond to comments. You decide how much exterior detailing you’re willing to pay for, because historic-sensitive streets in Burlingame Park and the Easton Addition reward a design that reads as compatible rather than modern-box.
Stage 4: Structural, Title 24, and permit set (week 12 – 20)
An engineer sizes the foundation and framing, and we run the energy compliance and full permit drawings. You approve the final material selections that lock into the drawings. This is also when we flag any existing-condition upgrades the plan will trigger, so the construction budget reflects reality instead of a schematic.
Stage 5: Permit issuance and construction handoff (week 20 – 28)
The city reviews, we answer corrections, and the permit issues. You get a fixed line-item construction price from us off the approved set, and the crew starts. From there, inspections follow in sequence: foundation, framing, rough electrical and plumbing, then final.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between before drawings freeze
Design decisions and budget are the same conversation. What you commit to at schematic stage is what you pay for later, so here’s where the real trade-offs live.
- Attached vs. detached: An attached unit is cheaper to build because it shares a wall and utilities, but it’s tighter on your lot and harder on privacy. A detached unit costs more but reads cleaner on a small Burlingame lot and gives you a separate address.
- Square footage: Going from roughly 500 sq ft to 750 sq ft adds real dollars per foot, mostly in foundation, roofing, and mechanical. Size up only if the site and budget genuinely support it.
- Exterior cladding: Wood siding and stucco match the historic stock and suit the streetscape, but wood demands the detailing and painting Burlingame’s damp mornings punish if it’s done cheap. Fiber-cement siding holds up with less upkeep and reads convincingly when trim is right.
- Windows and doors: Premium glazing and door systems like the Therma-Tru and ViewLux lines give you real thermal performance and a finish that matches high-end homes. Standard units save money but show their grade on a street of custom houses.
- Mechanicals and integration: A ductless system keeps the unit independent and simple. Tying into the main house systems saves on equipment but complicates the design and metering.
- Kitchen and bath finish level: This is where a permit set quietly undershoots a real budget. If you’re pairing this with a Full Kitchen Remodeling in Burlingame or new Cabinets & Countertops in Burlingame in the main house, throw those numbers into the plan now.
What ADU Design & Permitting costs in Burlingame, CA
The design-and-permitting work for a Burlingame ADU project lands in the $45,000 – $130,000 range when it’s part of the full build scope. Whether you land near the low or high end depends on variables that are predictable once we’ve walked the site.
- Existing condition: An older home with pier-and-beam framing, original wiring, and prior remodel layers pushes the design work up because the plan has to account for upgrades the drawings didn’t anticipate.
- Site constraints: Narrow setbacks, sloped grade, or access limits raise survey and structural work.
- Historic review: Exterior detailing and compatibility work on sensitive streets adds design hours and review cycles.
- Relocating plumbing, electrical, or structure: Tie-ins that move services cost more in engineering and permit scope than keeping them in place.
- Finish level: Custom finishes and premium door and window systems raise both the design and the build tally.
A written estimate from us is line-item and fixed. The number you see is the number you pay, no change orders for things we should have caught. What isn’t included is the city’s own permit fees, which we itemize separately up front so there are no surprises later. Call (833) 997-7759 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame homes specifically do to this job
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and construction here is defined by working around historic single-family stock rather than new build. In Burlingame Park, around Downtown, and through the Easton Addition, the housing stock runs from early-1900s Craftsman bungalows to Spanish Colonial Revival and Tudor cottages, many with original knob-and-tube-era wiring, pier-and-beam or raised foundations, and narrow lot setbacks. That means much of our design-and-permit work here is high-end remodel and ADU conversion, not ground-up.
The damp is the other factor. Burlingame sits between the bay and the coastal hills, cool fog-influenced summers and persistent morning moisture, which makes exterior detailing and weatherproofing central rather than cosmetic on wood-sided and stucco homes. And because Burlingame’s design-review process on additions and new structures rewards patience, we build review cycles into the schedule from day one. If you’re planning this as part of a full Home Additions & ADU in Burlingame scope, we coordinate the whole thing through our Home Additions & ADU service. We cover Burlingame and neighboring Burlingame service areas including Foster City and South San Francisco.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – ADU Design & Permitting in Burlingame
Expect 4 – 7 months from first survey to permit issuance for a typical Burlingame ADU, longer if historic review adds cycles. Construction time depends on the unit type and condition. Call (833) 997-7759 to get a realistic timeline for your property.
Yes. Any new or converted dwelling unit requires a permit and design-review submittal in Burlingame. We handle the drawings, engineering, and submittal so the process doesn’t stall on paperwork.
Often yes, and keeping services where they are is the cheapest path. We evaluate the existing utility locations during the site survey and design around them wherever the layout allows.
Budget $45,000 – $130,000 for the design-and-permit scope on a full ADU project, depending on site, existing condition, and finish level. Call (833) 997-7759 for a free on-site estimate.
Every project carries our 730-Day Done Right Promise. If something we built isn’t right, we make it right, and that’s in writing.
Get your free ADU design-and-permit estimate in Burlingame
Call (833) 997-7759 to schedule a free on-site estimate for ADU Design & Permitting in Burlingame. We’ll walk your lot, talk through the unit type and budget, and give you a written line-item plan for the design and review stages. A live person answers around the clock, so you get a real answer whenever you call.
Written by the team at Groundwork Construction Co.