Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in San Francisco: What the Job Actually Involves
Custom and geometric windows in San Francisco are built-to-drawing units – arched, radius, trapezoid, triangular, circular and angled – that replace or add to openings where a stock window won’t fit. Most single-opening jobs run three to six weeks from template to final trim, and a multi-window façade package runs two to four months once Planning review is counted. Pricing on the custom line lands roughly in the same band as our other window work, $5,310 to $17,700 per project depending on count, glazing and trim. Call (833) 997-7759 to set up a free on-site estimate.
How we take a custom or geometric window from template to trim
A custom window order is a sequence, not a single appointment. Here is exactly how it runs, and where you make the calls.
- Stage 1 – Site measure and template (day 1, 2 to 3 hours). We measure the rough opening, check the wall for plumb and square, and look at what’s behind the plaster. On a Victorian or Edwardian, that inspection often finds the original header undersized or a prior remodel that cut into framing. You decide here whether we’re matching the existing window pattern or improving on it.
- Stage 2 – Shop drawing approval (5 to 10 business days). The manufacturer sends a scaled drawing of the exact radius, angle and muntin layout. You sign off on this drawing. Nothing gets built until you do, and this is the single most important approval in the job. A radius that looks right in a photo can look wrong on your wall.
- Stage 3 – Permit and historic review (2 to 8 weeks, San Francisco-dependent). Most like-for-like replacements don’t require a permit, but changing an opening’s size, adding a new opening, or altering a street-facing elevation in a historic district does. We pull what’s needed and manage the inspection.
- Stage 4 – Fabrication (4 to 8 weeks for custom geometry). Standard rectangles move faster; true arches and trapezoids queue behind the shop’s curve line. You choose glazing, finish and hardware during this window.
- Stage 5 – Install and finish (1 to 3 days per opening). We set the unit, flash and seal it, insulate the cavity, and trim out. Exterior painting and stucco patching follow in dry weather, which in San Francisco means we schedule around the rain, not the heat.
Throughout, our technicians have up to 12 years of experience with radius and angled fabrication, and every project carries the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for a geometric window
Most of the cost and most of the long-term satisfaction live in four decisions. Here they are with the honest trade-off on each.
- Frame material. Wood matches original Victorian and Edwardian trim and takes paint beautifully, but it needs repainting every several years in the damp coastal air. Aluminum-clad wood gives you a wood interior with a low-maintenance exterior and is the sensible middle. Vinyl costs less and holds up to moisture, though it can’t match a fine historic profile.
- Glazing package. Double-pane low-E is the baseline for comfort and noise. A third pane or laminated glass quiets a busy street and adds security; it also adds weight the frame and hardware must carry.
- Geometry tolerance. Tight radii and steep angles cost more to fabricate and can’t be value-engineered later. If the design can soften an angle by a few degrees without losing the look, the price drops.
- Finish and hardware. Painted trim, stained interior, and the operating hardware all get chosen here. For entry-adjacent custom units, Therma-Tru door systems are a common pairing when a homeowner is refreshing the whole opening.
What Custom & Geometric Windows cost in San Francisco, CA
Expect a range of $5,310 to $17,700 for a custom or geometric window project in San Francisco, with a single radius or arched unit typically landing in the lower-to-middle of that band and a multi-window façade package reaching the top end. Here is what moves the number:
- Count and geometry. One arched unit costs less than a bank of three trapezoids sharing a mullion. Each additional custom unit adds labor and fabrication.
- Existing condition. Rotted framing, undersized headers, or a prior remodel gone wrong behind the wall add carpentry before the new unit goes in.
- Relocating openings. Moving an opening means cutting framing, patching stucco or siding, and re-trimming – the biggest single driver of a jump to the high end.
- Material and glazing grade. Clad wood and triple glazing sit well above a standard vinyl double-pane.
- Permit and historic-review scope. City review fees and added design time push the total up when the elevation is regulated.
A written estimate from us is line-itemed: unit, glazing, trim, installation, flashing and finish, permit where required. It does not include exterior repainting of the surrounding wall, structural repair beyond the opening, or historic consultant fees if an outside one is required. Upfront pricing, no surprises, and 0% financing for 18 months is available. Call (833) 997-7759 for an exact figure.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco homes specifically do to a geometric window job
The hard part of this work here is the housing stock and the rules that protect it. San Francisco is rows of 1880s to 1920s wood-frame Victorians and Edwardians packed shoulder to shoulder on narrow lots, with soft-story garages and unreinforced brick chimneys behind historic façades. In the Mission, Noe Valley and the Haight, a custom window install is often also a chance to correct framing that’s been carrying a load since the Gold Rush era. The constant coastal damp drives rot and mold in exposed wood, and stucco work is a dry-season trade. Then there’s process: the city’s Soft-Story retrofit rules and the Planning Department’s historic-review triggers can add weeks to a job that in Daly City or South San Francisco would be a simple permit. That’s the reason our estimate includes a look at the wall, not just the window. We work across San Francisco, and homeowners often pair this with Concrete Driveways & Concrete Work in San Francisco or Asphalt Driveways & Resurfacing in San Francisco while crews are on site.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in San Francisco
Most single-opening jobs take three to six weeks from template to final trim, and larger façade packages take two to four months once Planning review is counted. Fabrication alone is four to eight weeks for true arches and angles. Call (833) 997-7759 for a schedule based on your opening.
Like-for-like replacement at the same size usually does not, but changing an opening’s size, adding a new opening, or altering a street-facing elevation in a historic district often requires a permit and sometimes historic review. We determine which applies during the site visit and pull what’s needed.
In most cases yes – a like-for-like unit fits the existing rough opening and only needs trim and flashing. Moving an opening, or discovering compromised framing behind the wall, means structural work and that’s the case we flag and price before we start. Call (833) 997-7759 to talk it through.
Expect $5,310 to $17,700 for a project, with a single arched or radius unit near the low end and a multi-window façade at the top. Geometry, material grade, existing framing and permit scope are the main variables. Call (833) 997-7759 for a line-itemed estimate – it’s free.
Every custom and geometric window install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranty on the unit runs separately and depends on the frame and glazing you choose. Call (833) 997-7759 for details.
Get a free on-site estimate for Custom & Geometric Windows in San Francisco
If you’re planning custom or geometric windows, start with a free on-site estimate. We measure the opening, check the framing, and tell you plainly what the city process will require. As part of the wider scope, this fits neatly into our Windows & Doors service, and if you’re also reworking the whole exterior, see Windows & Doors in San Francisco and our San Francisco service area. Call (833) 997-7759 – a live person answers around the clock.
Written by the team at Groundwork Construction Co.