Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Burlingame, CA: What It Costs and How Fast It Can Happen
Fence repair in Burlingame, CA typically runs $3500 – $9000 for the jobs we’re called out to most: a failing run of fencing, storm damage, or a gate and post system that’s gone out of true. Most repairs wrap in one to four working days depending on how much of the line is involved and whether any permits come into play. If you’re looking at a fence that’s leaning, sagging, or missing sections, call (833) 997-7759 and we’ll get an estimator out to look at it.
Key Takeaways
- Most Burlingame fence repairs land between $3500 and $9000, driven by run length and post condition.
- We inspect posts, footings, and rails first: buried post failures are the number one cause of a fence that won’t stay straight.
- Estimates are free, written line-item, and priced up front. No change-order surprises.
- Every repair is covered by our 730-Day Done Right Promise.
How Our Fence Repair Process Works, Step by Step
Homeowners in Burlingame live with a lot of old fences, and a lot of them were built on top of older fences. The repair process starts with understanding what’s actually there before we ever put a shovel in the ground.
Stage 1: On-site inspection (day 1, about 60 minutes)
An estimator walks the full run with you and probes each post. We check for rot, footing failure, hardware corrosion, and whether any run leans into a neighbor’s line. We photograph what we find. By the end of the visit you have a written scope in hand and you decide whether to repair the run or replace it, which is where Fence Installation in Burlingame comes up as the wider option if more than roughly a third of the posts are past saving.
Stage 2: Permit and material check (day 1 to day 5, varies)
Most repairs on an existing fence line don’t require a permit, but Burlingame is one of the more careful plan-check cities on the Peninsula, so we confirm before we schedule. If you’re replacing posts or a section of run in a way that changes height or lot-line position, we pull what’s needed and pass inspection before the job closes. You approve the material spec here: which species of wood, which fasteners, whether to match existing finish.
Stage 3: Demo and post work (day 2, one to two days)
We pull out failed posts, dig the footings, and set new ones in concrete. In Burlingame’s damp fog belt, we use galvanized and stainless fasteners as standard so hardware doesn’t fail before the wood does. This is the slow stage: a post needs to cure in its footing before you load it with rails. You decide at this point whether to re-cap any surviving posts to match.
Stage 4: Rails, boards, and gate rehang (day 3, one to two days)
We set rails, reinstall or replace boards, and re-plumb gates so they swing and latch without dragging. Board matching matters: on a Burlingame Park or Easton Addition home, the existing fence is often older lumber in a specific profile, and we source to match rather than plunk down a mismatched board and call it done.
Stage 5: Final walk and close-out (same day)
You walk the run with us. Every post is true, every gate latches, every board is fastened. We close out any permit and hand you the 730-Day Done Right Promise in writing. If anything fails in the next two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Repair Options You’ll Choose Between
Fence repair isn’t a single service. The options below are the real forks in the road that decide how the job goes, and each has a trade-off.
- Spot repair vs. section replacement: A leaking gate hinge or a single split board is a spot repair. Once several posts in a run fail together, spot repair is throwing money at a sinking line, and section replacement is the better spend.
- In-ground post replacement vs. surface-mounted post anchors: In-ground concrete footings are the durable choice for most Burlingame lots, but if you’re on a deck edge or near hardscape, a surface-mount anchor with proper bracing can be correct and cost less.
- Fastener grade: Hot-dip galvanized vs. stainless. Stainless costs more but holds up better in a coastal-fog climate where moisture hangs in the air for hours each morning.
- Finish matching: Repainting, staining, or clear-sealing a repaired run to match the surviving fence. Leaving fresh boards bare next to aged boards is the number one call-back we get from other contractors’ work.
- Gate hardware: Standard hinges vs. self-closing and adjustable units. Adjustable hardware is worth the upcharge on a gate that sees daily use from kids or pets.
Brands come up when we’re replacing gate hardware or panel systems. Barrette and Therma-Tru systems are two we’ll spec when the fit is right; we don’t force a brand into a repair where standard millwork does the same job at less money.
What Fence Repair Costs in Burlingame, CA
The number to anchor on is $3500 – $9000 for the fence repair jobs we handle in Burlingame most often. That covers a typical run of failed posts, section replacement, and gate rehang with finish matching. Below is the range breakdown.
| Line item | Typical range |
|---|---|
| Single post replacement (in-ground, footing, cap) | $250 – $650 per post |
| Section replacement (10 – 20 linear feet, rails and boards) | $700 – $2200 |
| Gate rehang and hardware upgrade | $300 – $900 |
| Full run rebuild of a residential fence line | $3500 – $9000 |
What pushes you to the high end:
- Post count: Five rotten posts is a much bigger job than one.
- Footing condition: Post footings set in clay or with poor drainage need to be dug out, not patched.
- Run length: A 60-foot run is materially more labor than a 20-foot run.
- Material match: Sourcing the right profile for an older Burlingame fence can cost more than off-shelf stock.
- Permit scope: If your repair edges into a lot-line change or a height change, plan-check time is billable.
What’s included in a written estimate: labor, materials, disposal, and final walk. What’s not: structural surprises under the footing, land survey if lot lines are unclear, and work on a neighboring property’s fence unless you authorize it. Estimates are free and the price you see is the price you pay. If a rare surprise comes up mid-job, we stop and get you on the phone before doing anything that changes the number.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame’s Homes Specifically Do to a Fence Repair Job
Burlingame is one of the older built-out suburbs on the Peninsula, and that shows up in the fence work in ways it doesn’t in newer Silicon Valley cities. In the Easton Addition and Burlingame Park, we’re often working on fences that were built alongside homes from the 1910s through the 1940s. Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages dominate. That means old growth Douglas fir and cedar lumber, hand-set post footings that may have settled unevenly over decades, and on many lots, layered repairs from previous owners that don’t match anything currently on the shelf. We routinely find three generations of fence in the same run.
Local climate drives the failure pattern too. Burlingame sits between the bay and the coastal hills, so we get cool, fog-influenced mornings and damp winters. Wood fences that get morning moisture and afternoon sun fail in a specific way: rot at the base of posts before boards even look tired. That’s why we probe every post on inspection, not just the ones that look soft. Hardware fails too, so galvanized or stainless is our default here rather than an upgrade.
Historic preservation and design review come into play on the properties themselves, less so on the fence line, but if your fence repair is part of larger exterior work or a property line change, the review question is real. If your repair ties into a bigger build, homeowners often pair this with Garage Conversion ADU in Burlingame or ADU Design & Permitting in Burlingame so the property reads as one project rather than five.
We cover all of Burlingame including ZIP codes 94010 and 94011, and we routinely travel to Foster City, South San Francisco, Daly City, and San Francisco from our regular routes across the Peninsula. If you want the wider fence picture, you can read our Fence Installation service page.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Fence Repair in Burlingame
Most single-run fence repair jobs in Burlingame take one to four working days from demolition to final walk. Post footing cure time is the wildcard: a section replacement with several new in-ground posts can push to three to five days because curing can’t be rushed. Call (833) 997-7759 and we’ll give you a firm day count with your estimate.
Most repairs to an existing fence line in Burlingame don’t require a permit, but any change to height, lot-line position, or a full rebuild of a fence line can trigger plan-check review. We confirm this at the inspection visit so it doesn’t become a surprise. If a permit is needed, we pull it and pass inspection for you.
Yes, in most cases. Our default is to save as much of the existing fence as structurally possible and replace only what’s failed. The honest version: if more than roughly a third of the posts in a run have failed, saving the rest rarely pays off, and a partial replacement is the better call. We’ll show you the reasoning rather than pressure you either way.
Fence repair in Burlingame typically runs $3500 – $9000 for a full run repair, with smaller jobs (a single post, a gate rehang, or a section of boards) well below that. The number depends on post count, footing condition, run length, and material match. Call (833) 997-7759 for a free written estimate; estimates are always free and always line-item.
Every fence repair we do in Burlingame is covered by our 730-Day Done Right Promise. If anything we repaired fails within that window, we come back and make it right. That’s in writing, not a verbal handshake.
Get a Free Fence Repair Estimate in Burlingame
We’ll come out, walk the run, probe the posts, and hand you a written line-item estimate the same day. No pressure to book, no mystery pricing, and a fixed number that stays fixed. Call (833) 997-7759 to schedule your free estimate for fence repair in Burlingame. A live person answers the phone, day or night. When you call, we’ll confirm a time window, ask a few questions about the fence, and get an estimator booked.
Written by the team at Groundwork Construction Co.