Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence Installation in Burlingame, CA: What It Costs and How Long It Takes
A wood fence in Burlingame usually runs $3,500 to $9,000, with most residential jobs landing around $5,000 to $7,500 for 100 to 150 linear feet of quality cedar or redwood. Plan on three to five working days on site, plus a week or so for permit review if your fence sits on a property line or crosses a setback. Call (833) 997-7759 and we’ll walk your lot, check the setback, and put a line-item number in writing.
How We Build a Wood Fence Here, Stage by Stage
Every wood fence we build follows the same sequence. The durations below are what you should expect on a typical Burlingame lot.
Day 1: Walk-through and layout
We set the line with string and stakes, confirm the property corners against your survey, and mark every post location. This is where you decide the exact run, gate placement, and fence height (six feet is standard; five feet on the front approach to stay under most design-review thresholds). If a corner is ambiguous, we flag it before any digging starts. Layout takes two to three hours.
Day 1 – 2: Demolition and haul-off
The old fence comes out post and all, and we haul the debris away the same day. On older Burlingame lots we sometimes find rotten post footings or a previous fence line buried a foot off the current property line, so we verify before we set the new line. Half a day to a full day depending on run length.
Day 2 – 3: Digging and setting posts
Posts go in at eight-foot spacing, set in concrete footings below grade so the wood never touches soil. We check plumb and line as we go. This is the part that decides whether your fence is still straight after a decade of damp Peninsula winters. Post setting takes a day, and the concrete needs 24 to 48 hours to cure before we hang rails.
Day 3 – 5: Rails, boards, and gate
Horizontals go on, then the pickets or boards. A single gate usually takes half a day; a double-drive gate takes longer because of the heavier framing. You choose board style, cap, and whether the finished side faces you or your neighbor. Framing and pickets run two to three days for a standard run.
Final day: Touch-up and walkthrough
We set the gate swing, check every post and board, apply any stain or sealer you’ve chosen, and clean the site. You walk the fence line with us before we call it done. This is also when you get the paperwork on the 730-Day Done Right Promise.
If your wood fence is part of a full Fence Installation in Burlingame project that includes other fence types or a gate system, we sequence it the same way. You can see the wider scope on our Fence Installation service page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Material and Style Choices, With the Honest Trade-offs
- Cedar: The default for a reason. Holds up in Burlingame’s fog-influenced summers and damp winters, resists rot and insects, and stains well. Expect it at the higher end of the range, but it’s the one most homeowners come back to.
- Redwood: Premium look, natural rot resistance, and a richer grain. Costs more than cedar and needs re-sealing every few years in our climate. Suits the Spanish Colonial Revival and Tudor cottages around Burlingame Park.
- Pressure-treated pine: The budget option. Affordable up front, but shrinks, warps, and wants staining sooner. Fine for a back-lot run or a temporary screen; not what we’d put on a street-facing line.
- Dog-ear vs. flat-top boards: Dog-ear pickets are the classic look most Peninsula homes use; flat-top reads cleaner and more contemporary. Slight cost difference, mostly a taste call.
- Board-on-board vs. tight picket: Board-on-board gives privacy and hides the neighboring side; tight picket is faster and cheaper.
- Post caps and trim: Add a finished look and protect the end grain from moisture. Small line item, real weather payoff.
- Stain and sealer: On cedar or redwood, a penetrating sealer keeps the color and adds years. We can quote it as part of the build or as a follow-up coat.
We also use quality hardware from makers like Barrette where it fits the job, and the same brand discipline runs through every trade on our projects.
What a Wood Fence Costs in Burlingame, CA
Most wood fence work in Burlingame falls between $3,500 and $9,000, and the range is wide for good reasons. Here’s a line-item breakdown to anchor your budget:
- Cedar privacy fence, 100 – 150 linear feet: $5,000 – $9,000
- Redwood fence, similar run: $6,000 – $9,500
- Pressure-treated pine run: $3,500 – $6,000
- Single gate with hardware: $400 – $1,200 added
- Double-drive gate: $900 – $2,500 added
- Stain or sealer: $300 – $900
- Demo and haul-off of old fence: $300 – $1,000
What pushes a job toward the top end: longer runs, premium redwood, complicated terrain with slope or hardpan, replacement gate hardware, and a property-line dispute that needs a surveyor. What keeps it at the low end: a straight, flat run, pine over cedar, and no demo needed. A written estimate lists the linear footage, post spacing, board species, gate count, hardware, and cleanup. What it typically doesn’t include is a survey, landscape repair beyond basic cleanup, or a permit fee if one is required. The number we quote is the number you pay, and we won’t hit you with change orders once the posts are in.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Do to a Wood Fence Job
Burlingame’s core is early-1900s through 1940s single-family homes, Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages, many on narrow lots where the side-yard fence line is tight to the house. In Easton Addition and Burlingame Park, those narrow setbacks mean a fence upgrade often has to be planned around existing trees, utility lines, and old footings that were never removed. The damp morning moisture that hangs over the Peninsula from the bay means wood fences here need proper ground clearance and ventilation, or the bottom boards rot out in a few seasons. If your fence is on a property line, or you’re changing the height or appearance on a street-facing side, expect design review to have a say. We handle the permit application and pull the permit ourselves where the city requires it. Homeowners often pair a new fence with Paver Driveways in Burlingame or Concrete Driveways & Concrete Work in Burlingame to finish the front approach in one pass. We regularly cover the whole of Burlingame, from the 94010 and 94011 ZIPs down to the neighborhoods near the bay.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Wood Fence in Burlingame
Most wood fence projects here take three to five working days on site, plus a week or so for permit review if one is required. Small runs on a flat lot can finish in two days; long runs with slope and a drive gate can take a week. We give you a schedule with the written estimate.
It depends on height and location. Fences over six feet, or on a property line, or facing the street in a design-review overlay, typically need a permit. We check the requirements for your specific lot before we quote and pull the permit ourselves when it’s needed. Call (833) 997-7759 and we’ll tell you what your lot requires.
Yes, in most cases. We set posts at eight-foot spacing and plan around trees and irrigation lines. Where a root or line is in the way, we adjust the post location rather than cut through it. If a tree is too close to the line, we’ll tell you before any digging starts so you can decide.
Expect $3,500 to $9,000, with the typical job around $5,000 to $7,500 for 100 to 150 linear feet of cedar or redwood. Species, run length, gate count, and demo work move the number. Call (833) 997-7759 for an exact quote. Estimates are free.
Every wood fence we build is covered by our 730-Day Done Right Promise. If a post settles, a board fails, or a gate sags within that window, we come back and make it right. Our technicians have up to 12 years of experience, and the same crew handles your punch list.
Get a Free Wood Fence Estimate in Burlingame
Call (833) 997-7759 to schedule a free on-site estimate for your wood fence in Burlingame. A real person answers around the clock, not a voicemail. We’ll walk the line, confirm the setback, talk species and board style, and leave you with a written line-item number before you commit to anything. Financing is available if you qualify.
Written by the team at Groundwork Construction Co.