Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in San Francisco: What It Takes and What It Costs
Gutters & accessories work in San Francisco runs $2,400 to $6,800 for a full replacement on a typical two- or three-story Victorian or Edwardian, and most jobs are finished in two to four days once the rain window is locked in. Half-round aluminum is the most common pick here; copper shows up on the historic façades in Noe Valley and the Haight, where it costs two to three times more. Call (833) 997-7759 to schedule a free on-site estimate before the next storm cycle.
How We Run a Gutters & Accessories Job, Start to Finish
The sequence below is what actually happens on a San Francisco gutters job. It is not the same as a suburban install, because most of these houses sit on narrow lots with shared property lines and exposed eaves that are two to three stories up.
Day 1: Assessment and layout
A technician walks the roofline, measures every run, checks the fascia for rot, and notes where the downspouts currently discharge. On a Mission or Noe Valley Victorian, that discharge point often lands on a neighbor’s side of the property line, which changes the whole design. We map the new layout and identify any fascia sections that need repair before anything new gets hung. Expect two to three hours.
Day 1, continued: Demo and fascia repair
Old sectional gutters come down, and any soft or rotted fascia gets sistered or replaced. On homes built between 1880 and 1920, we find rot in roughly one out of every three runs we touch, because coastal moisture gets behind the original wood and stays there. This is the stage where surprises show up, and it’s why a written line-item quote matters more than a single number on a napkin.
Day 2: Hanging the new system
Seamless half-round or K-style aluminum gets run on site, hangers get set every 24 inches (closer on heavy copper), and downspouts go in. On copper work, most of the day is soldering and fitting. This is the stage where the homeowner decides on bracket style, downspout color, and whether to add leaf guards.
Day 2 or 3: Accessories and tie-ins
Leaf guards, rain chains, downspout extensions, splash blocks, and any gutter-to-drain tie-ins get installed here. If the house has a flat or low-slope section, scuppers and conductor heads get set. This is when the system starts working as a whole rather than a collection of parts.
Final day: Water test and walkthrough
We run water through every section, check for pitch problems and leaks at every seam, and walk the homeowner through the system. A written record of what was installed goes with the invoice, and the 730-Day Done Right Promise covers the workmanship. From first call to final walkthrough, most San Francisco jobs land inside a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
There’s no single right answer here. The right material depends on the house, the budget, and how much maintenance the homeowner wants to take on.
- Seamless aluminum (K-style or half-round). The workhorse. Light, rust-proof, available in dozens of colors, and priced in the middle of the range. It’s what we install on most San Francisco homes. Half-round is the better fit for the curved eaves you see on the older Victorians.
- Copper. Two to three times the cost of aluminum, but it holds up for decades and develops the patina that suits a true Victorian. Best for homes where the streetscape matters and the homeowner isn’t planning to move.
- Galvanized steel. Stronger than aluminum but heavier and prone to rust at the seams, especially in coastal fog. Worth it on homes with long runs and heavy debris loads.
- Leaf guards. Mesh or reverse-curve. Mesh screens keep out the eucalyptus and cypress debris that clog half the gutters we see in San Francisco. Reverse-curve systems work well on high-volume roofs but aren’t for every pitch.
- Accessories. Rain chains, downspout extensions, splash blocks, and conductor heads. Small line items, but they decide where the water actually goes.
- Fascia and soffit repair. Not optional if the wood is soft. New gutters hangers won’t hold onto rotted fascia, and this is the number one cause of premature failure we see.
What Gutters & Accessories Cost in San Francisco, CA
Full gutter replacement in San Francisco runs $2,400 to $6,800 for a typical home. Accessories add on top. Here’s how the line items break down:
| Item | Typical Range |
|---|---|
| Seamless aluminum gutters (installed, per linear foot) | $9 – $22 |
| Copper gutters (installed, per linear foot) | $22 – $45 |
| Fascia repair (per linear foot) | $18 – $40 |
| Downspouts (installed, per run) | $85 – $220 |
| Leaf guards (per linear foot) | $7 – $16 |
| Rain chains | $120 – $350 |
| Gutter cleaning (per visit) | $180 – $380 |
What pushes a job to the high end: two- and three-story heights (falls and staging on narrow lots), long runs on a wide façade, rot in the fascia, copper instead of aluminum, and any downspout reroute that requires cutting into a wall or paving. What keeps it low: a single-story house, a short run, healthy fascia, and aluminum with no leaf guards.
Every written estimate we produce is line-item. It shows material, labor, disposal, and any repair we already know about. What’s typically outside the estimate: hidden rot discovered after demo, permits if the work crosses into structural territory, and any plumbing or electrical relocation if a downspout has to move away from a utility line. We flag those before work starts, not after. If your gutters are part of a larger scope, it’s often worth looking at our Roofing in San Francisco page to plan the work together.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
The housing stock here drives up the cost and complexity of gutters in ways other cities don’t see. Rows of 1880s to 1920s wood-frame Victorians and Edwardians in the Mission, Noe Valley, and the Haight sit shoulder-to-shoulder on narrow lots, which means reaching the eaves often requires staging from a neighbor’s side or working off an extension ladder in a slot barely wide enough for it. The fog-cooled, mild summers and damp winters here weave around rain rather than heat, and constant coastal moisture destroys exposed fascia faster than almost anywhere else in the region. Nothing gets installed in the wet months if we can help it, and once the rains come, we’re either working dry days or waiting. Unreinforced brick chimneys and soft first-story garages on these homes mean access is often the hard part, not the gutter itself.
Permits are usually not required for straight gutter replacement on these homes, but if the work crosses into structural fascia repair, deck ledger attachment, or anything affecting the historic façade on a contributing building, the Planning Department’s historic-review triggers can extend the timeline. On newer stock in Emeryville and Alameda, this is a simple install. In San Francisco, we plan the schedule around the rain window and pull the homeowner into decisions early. We cover San Francisco from zip codes 94126 through 94140 and answer the phone live, 24/7. If the roof itself needs attention while the gutters are off, our roofing service handles that in the same pass, and homeowners often pair exterior work with Sliding & Patio Doors in San Francisco and Impact Garage Doors in San Francisco.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Gutters & Accessories in San Francisco
Full replacement runs $2,400 to $6,800 for a typical two- or three-story home, with copper at the top of that range and aluminum near the bottom. Accessories like leaf guards and rain chains add $300 to $1,200 depending on length. Call (833) 997-7759 for an exact quote; estimates are free and line-item.
Most jobs are done in two to four working days once we have a dry window. Scheduling to the dry window is often the bigger variable here, because a rainy week pushes the start by several days. We plan around the forecast and set a real start date in writing.
Straight gutter replacement typically doesn’t require a permit. If fascia repair becomes structural, or the work touches a historic façade on a contributing building, the Planning Department may get involved and the timeline can stretch. We pull any needed permits and pass the inspections for you.
In most cases yes. Gutter and downspout work stays above the building envelope and doesn’t require moving plumbing or structure. The exception is a downspout reroute that needs a wall penetration or a new drain connection, which we flag in the estimate before work starts.
All gutters & accessories work is covered by the 730-Day Done Right Promise. If the workmanship fails within that period, we come back and make it right at no additional cost. Material warranties from the manufacturer apply separately and we pass them to you in writing.
Get a Free Gutters & Accessories Estimate in San Francisco
Call (833) 997-7759 to schedule a free on-site estimate for Gutters & Accessories in San Francisco. A live person answers, day or night. We’ll walk the roofline, measure every run, and hand you a written line-item quote with no surprises, backed by the 730-Day Done Right Promise. 0% financing for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.