A Groundwork company - serving Oakland, CA
Iron Fence in San Francisco, CA | Groundwork Construction Co. of Oakland

Iron Fence in San Francisco - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in San Francisco: What It Costs and How Long It Takes

A wrought iron fence in San Francisco typically runs $4,130 to $10,620, installed, depending on linear footage, height, and whether you’re setting posts into a hillside or a flat lot. Most residential jobs take three to five working days once permits clear, and historic-district review can add weeks before that clock even starts. Call (833) 997-7759 for a free on-site estimate and a written, line-item quote before any work begins.

Call (833) 997-7759

How We Build an Iron Fence in San Francisco, Start to Finish

Iron work is unforgiving of shortcuts. Posts set shallow or railings anchored into crumbling stucco will fail within a season, and in this city’s damp air you’ll see the rust before you see the sag. Here’s the actual sequence, so you know what’s happening on your property and when we need a decision from you.

Stage 1: Site walk and layout (day 1, about 90 minutes)

We measure the run, check property lines against your survey, and probe what’s underground along the fence path. On a Noe Valley or Mission lot that often means finding old clay drain tile, irrigation lines, or a brick footing from a fence that stood there in 1920. You decide the gate locations and swing direction at this stage, because moving a gate later means new posts.

Stage 2: Demo and footing prep (days 1 – 2)

Out comes the old fence, and we set new footings at the spacing your panel design requires, usually 6 to 8 feet on center. Footings go below the frost line and, on sloped lots, get stepped so the fence follows grade without a floating rail at the bottom. On tight San Francisco side yards, this is often hand-dig work because equipment won’t fit past the building.

Stage 3: Fabrication and delivery (days 2 – 6, off-site)

Welded steel panels and pickets are cut and finished to your spec, then hot-dip galvanized or powder-coated. This is the part that runs in parallel with footing cure, and it’s where your finish choice has the biggest long-term consequence. You approve the final panel drawing before anything gets welded.

Stage 4: Setting and assembly (days 3 – 4)

Posts set into cured footings, panels hung plumb, gates aligned and hardware mounted. We check every gate for smooth swing and latch engagement before we call it done. On a shared property line, this is also when we confirm nothing encroaches on your neighbor’s side.

Stage 5: Finishing and walkthrough (day 5)

Touch-up on any scratched coating, final cleanup, and a walkthrough with you. We hand over care instructions and confirm the finish warranty terms in writing. Most jobs are finished in a single visit cycle after fabrication; larger runs with multiple gates may stretch a day or two.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Iron Fence Options You’ll Choose Between

Every iron fence decision comes down to a handful of trade-offs. Here’s what actually matters and how each choice holds up.

  • Mild steel vs. wrought iron: True wrought iron is largely a salvage material now; most residential work uses mild steel. It’s stronger per pound and easier to fabricate, but it rusts fast if the coating fails. Wrought iron, when you can source it, resists corrosion better and lasts longer, at a higher price.
  • Hot-dip galvanized vs. powder-coat finish: Galvanizing gives the best corrosion protection and is the right call for coastal fog exposure. Powder coat gives a cleaner, more uniform black and better color options but chips at weld points. The two are often combined.
  • Picket spacing: Tighter spacing (under 4 inches) improves security and keeps small pets in; wider spacing costs less per foot and reads more open. Most San Francisco front-yard fences land at 4-inch spacing.
  • Height: 36 to 48 inches is the residential sweet spot. Anything over 6 feet in a front yard needs a permit and often triggers planning review.
  • Gate hardware: Self-closing hinges, keyed latches, and a concealed closer add cost but make a driveway or pedestrian gate usable daily without sagging.

What an Iron Fence Costs in San Francisco, CA

Residential iron fence installation in San Francisco falls between $4,130 and $10,620. That range covers a typical front-yard run with one gate on a flat or mildly sloped lot. Several things push a job toward the high end.

  • Linear footage and height: A 60-foot fence at 4 feet sits near the low end; 100-plus feet at 5 feet with multiple gates climbs toward the top.
  • Site access and slope: Hillside lots, narrow side yards, and rear-yard runs that require hand-digging add labor hours.
  • Existing conditions: Removing an old masonry or brick footing costs more than pulling wood posts.
  • Finish grade: Galvanized-plus-powder-coat finishes and custom cast finials push material cost up.
  • Permit scope: Historic-district review or a height variance adds both time and fees.

A written estimate from us itemizes panels, posts, footings, gates, hardware, finish, and permit fees. It does not include landscape repair beyond reseeding, or relocation of utilities discovered underground after the walkthrough. Upfront pricing means the number in the quote is the number you pay unless you change the scope.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What San Francisco Homes Specifically Do to This Job

This city’s housing stock makes an iron fence job harder than it looks on paper. Rows of 1880s – 1920s wood-frame Victorians and Edwardians sit shoulder-to-shoulder on narrow lots across the Mission, Noe Valley, and the Haight. That means shared property lines, tight side access, and footings that often hit old brick or unreinforced concrete from an earlier fence. The city’s Soft-Story and UMB retrofit ordinances mean many of these homes have had foundation and first-story work done, so we check that a new fence footing won’t interfere with existing bolting or bracing. Historic review triggers in some districts can add weeks to a job that would be a simple permit in Daly City or South San Francisco. And the fog line at Twin Peaks genuinely decides whether concrete cures that week, so our schedule rotates around the damp, fog-cooled winters rather than heat. If you’re planning a broader exterior project, homeowners often pair this with Patios, Walkways & Pool Decks in San Francisco or a full Fence Installation in San Francisco scope.

We bring our Fence Installation service across San Francisco and the ZIP codes 94142, 94144, 94145, and 94146, and we coordinate closely with homeowners planning a ADU Design & Permitting in San Francisco project where fence lines and property setbacks need to be worked out together.

Serving San Francisco, CA – Our Local Coverage Area

We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in San Francisco

Get a Free Iron Fence Estimate in San Francisco

Call (833) 997-7759 for a free on-site estimate on your iron fence. A live person answers around the clock, and we’ll walk your property, measure the run, check for permit triggers, and hand you a written, line-item quote with no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.

Written by the team at Groundwork Construction Co.

Why San Francisco Chooses Groundwork Construction Co. of Oakland

We set the standard for iron fence in San Francisco.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in San Francisco

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Francisco Customers Say

Trusted by homeowners across San Francisco and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Iron Fence in San Francisco?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in San Francisco.

(833) 997-7759

Request a Free Estimate in San Francisco

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch