Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Tub-to-Shower Conversion in Daly City Involves
A tub-to-shower conversion in Daly City usually takes 5 to 9 working days and runs $3,500 to $10,000, depending on pan type, tile, glass and whether the drain has to move. We cut out the old tub and surround, rebuild the wet area to current code, and set a curb or curbless shower in its footprint. Call (833) 997-7759 for a free on-site estimate.
How the conversion actually runs, day by day
Most homeowners want to know what the week looks like before they commit the bathroom. Here’s the sequence we follow on a standard Daly City conversion.
- Day 1 – tear-out and first look at the framing. The tub, surround, shower valve trim and any glass come out. We set a dust barrier at the door and protect the floor. This is the day we find out what’s behind the wall, and in a 1950s Daly City home it’s often rotted framing or a tub ledger nailed to sand-dampened studs.
- Days 2-3 – plumbing and rough-in. The drain gets relocated or reused, the mixing valve is swapped or rebuilt, and we rough in the new shower head, niche and bench blocking. If the wall is open and the framing is soft, we sister in new studs and treat before anything is closed up. A city inspection usually happens on day 3 or 4 once rough plumbing is exposed.
- Days 4-5 – substrate and waterproofing. We hang cement board or a foam shower system over the studs, pack or set the pan, and roll on the waterproof membrane. This stage gets a flood test on most pan installs, which means roughly 24 hours of sitting water before we tile. It’s the step nobody wants to pay for and the one that decides whether the job lasts.
- Days 6-7 – tile and grout. Wall tile, floor tile, niches and the seat finish out. Grout and sealant come last, and we don’t rush the cure.
- Days 8-9 – trim, glass and final inspection. Shower head, valve trim, grab bars if you’re adding them, glass enclosure, and a final walkthrough. You’ll want to be home for the trim-out so you can flag anything before we pack up.
The homeowner decisions land at three points: material selections on day 2, bench and niche placement on day 4, and glass style on day 6. If selections are made before demo starts, the schedule holds. If they slip, the job stalls.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that matter when you pick this apart
A lot of the price difference between a $3,500 conversion and a $10,000 one lives in the materials, not the labor. Here’s what you’re actually deciding between.
- Pan type. A prefab acrylic or fiberglass pan is the fastest and cheapest route, in the $400 to $900 range for the pan itself, and it wipes clean easily. A tiled pan with a mud bed or foam base costs more and looks better, but it depends entirely on waterproofing done right.
- Curb vs curbless. Curbless showers suit aging-in-place and look clean, but they require a recessed pan and can mean relocating the drain, which pushes the number up by a thousand or more. A standard curb is simpler and quicker.
- Wall material. Acrylic surround panels go in fast and last, but they read as a hotel bathroom. Ceramic or porcelain tile is what most Daly City homeowners choose, and the difference in feel is real. We stock tile through suppliers who work with KraftMaid and Silestone vanity tops if you’re pairing a new vanity into the same job.
- Glass. A frameless panel and door is the most expensive option, in the $900 to $2,200 range, but it’s what makes a small bathroom feel bigger. A framed shower door runs half that.
- Shower valve and trim. Replacing the old valve body is worth the $250 to $600 it costs while the wall is open. A brand-new cartridge and trim on a 55-year-old valve is waste.
What Tub-to-Shower Conversion costs in Daly City, CA
For a tub-to-shower conversion in Daly City, expect a range of $3,500 to $10,000. The low end is a prefab pan, acrylic surround and the existing drain location reused. The high end is curbless, tiled to the ceiling, frameless glass and a relocated drain.
Five things move the number:
- Size of the alcove. A standard 30×60 tub footprint stays cheap. Widening the alcove means framing and wall work, which can add $1,500 to $2,500.
- What’s behind the wall. Soft framing, mold, or a rusted drain flange all get discovered on day 1. In Daly City’s older stock this is the most common surprise and the one we can’t see until demo.
- Plumbing relocation. Reusing the drain saves real money. Moving it into a curbless pan or a different corner runs $800 to $2,000 in rough plumbing alone.
- Grade of tile and glass. Porcelain and ceramic sit in the middle. Natural stone and frameless glass push a job toward the top of the range.
- Permit scope. A simple conversion with the drain reused pulls a lighter permit than one that touches plumbing layout, framing or electrical for a new fan circuit.
A written estimate from us lists the demo, rough plumbing, substrate, waterproofing, tile, glass, trim and disposal as line items. What’s not usually included: structural repair if framing is compromised, mold remediation, and any new vanity or cabinet work, which is often bundled in when the conversion is part of a Bathroom Remodeling in Daly City. We don’t do change orders, so nothing moves once the number is in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
Daly City is built almost entirely on the wind-blown sand dunes and fog-belt slopes of San Bruno Mountain’s western flank. That changes what a tub-to-shower conversion uncovers. Hillside sand shifts, moisture sits in west-facing walls, and the marine layer keeps surfaces damp year-round in neighborhoods like Westlake and Serramonte. A tub wall in a 1950s Daly City home is often softer than it looks from the tile side, and the vapor drives festering rot in the studs before anyone notices.
Permitting here runs through San Mateo County and the city’s building department. Most conversions pulling a plumbing or framing change need a permit and an inspection on rough plumbing and final. On the steep streets above the Mission Street corridor, we routinely find original 1950s homes on shallow sand-set foundations, so we check for framing that has settled unevenly before we hang tile. The 1940s-1960s stucco-over-wood-frame homes packed along Mission and El Camino get hit hardest. If you’re already into the wall, homeowners often pair this with Metal Roofing in Daly City or Tile Roofing in Daly City to address the moisture that finds its way in from above. Our Bathroom Remodeling team handles the full scope when the shower is part of a bigger overhaul. We cover all of Daly City, including the 94014, 94015 and 94017 ZIP codes.
Tub-to-Shower Conversion questions we hear in Daly City
How long does a tub-to-shower conversion take?
Most conversions take 5 to 9 working days once demo starts, plus a few weeks of lead time for materials. A prefab pan and acrylic surround can finish closer to 5 days; a full tile job with curbless pan and glass runs longer. Call (833) 997-7759 to get a schedule for your bathroom.
Do I need a permit for a tub-to-shower conversion in Daly City?
Yes, if the plumbing, framing or electrical changes, and often even for the drain and shower valve. We pull the permit and handle the inspections as part of the written estimate. No permit is a red flag from any contractor.
Can you convert the tub to a shower without moving the plumbing?
Yes, in most cases. Reusing the existing drain location keeps the cost in the lower half of our $3,500 to $10,000 range. The pan type and whether you want curbless determine whether the drain has to move.
What does a tub-to-shower conversion cost in Daly City?
Our range is $3,500 to $10,000, with most jobs landing in the $5,500 to $8,000 band. Material grade, glass, pan type and any framing repair you find on day 1 drive the difference. Call (833) 997-7759 for an exact quote, with a free on-site estimate.
What warranty comes with the work?
Every conversion is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and fix it. That guarantee is written into the contract, not offered verbally.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Get a free estimate on your Daly City shower conversion
We’ll walk the bathroom with you, check the wall behind the tub if it’s accessible, and put real numbers in front of you for a tub-to-shower conversion in Daly City. Call (833) 997-7759 to schedule. A live person answers, day or night, and the estimate is free with no obligation.
Written by the team at Groundwork Construction Co.