Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Daly City: What It Involves and What It Costs
Metal roofing in Daly City runs $15,000 to $40,000 for a full installation, and most homes here land in the $18,000 to $28,000 range once the hillside prep work is factored in. The job takes three to seven days on site, plus a short tear-off and inspection phase before panels go down. Metal is a real answer to the fog-belt moisture that eats stucco and framing on this side of San Bruno Mountain. Call (833) 997-7759 and we’ll walk you through what your roof actually needs.
How We Do This Job, Stage by Stage
Metal roofing isn’t a one-day drop-and-screw. On a Daly City hillside home the sequence matters more than the panels do, because the deck underneath is usually 60-plus years old and sitting on a graded sand cut. Here’s the honest order of operations.
Day 1: Tear-off and deck inspection
We strip the existing roof down to the sheathing, which takes a full day on a typical 1,200 to 1,800 square foot Daly City roof. That’s the moment we find out what’s under there: rotted decking at the drip edges, water-damaged fascia, sometimes a second layer of old shingles someone laid over the first. You get a written line-item on any decking that has to be replaced before we go further.
Days 2: Deck repair and underlayment
Deck repair runs the second day when it’s needed. Then we install a high-temp peel-and-stick underlayment across the whole deck, which is the layer that keeps fog-driven moisture from wicking back up under the panels. On the west-facing slopes above the Mission Street corridor we don’t shortcut this step. You decide at this stage whether you’re adding ice-and-water membrane in the valleys or standard underlayment throughout.
Days 3 to 4: Flashing, trim, and edge metal
Panels get their support first: eave trim, rake trim, valley flashing, and the transition pieces around chimneys and vents. On a sand-based hillside lot, the perimeter flashing at the low eave takes longer than a flat-lot roof, because the fascia is often out of plumb from decades of settling. You’ll pick the trim color here, and it’s a real decision: matching trim to panels looks cleaner, contrast trim reads as a design choice.
Days 4 to 6: Panel installation
The panels go down in runs, fastened through the ribs or with concealed clips depending on the profile you chose. A 1,500 square foot residential roof lands in two to three days at this stage. We check panel alignment at each run so the seams read straight from the street, and we walk the ridge line before any ridge cap goes on.
Final day: Ridge, cleanup, and inspection
Ridge cap, any penetrations, and the final walk-through. We clean the gutters, sweep the yard with a magnet for fasteners, and hand you the written workmanship documentation. We pull the permit and schedule the local inspection so you’re not chasing paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. What you pick here drives both the cost and how the roof behaves in Daly City’s fog and salt air.
- Standing seam steel: The premium pick. Concealed fasteners, clean vertical lines, no screws showing to rust. Best lifespan, and the tightest against wind-driven rain off the Pacific. Highest cost end of the range.
- Exposed-fastener steel panels: Lower cost, easier to install, and a good fit on simpler gable roofs. The trade-off is visible fasteners that need checking over time, especially where salt air and fog do their work.
- Aluminum panels: Lighter and naturally rust-resistant. A strong choice within a mile or two of the coast. Costs more than steel but holds up where corrosion is the real enemy.
- Stone-coated steel: Gives you a tile or shake look with metal’s weight and durability. Popular on the tract homes where the original roof was shingle or a false tile look.
- Panel profile and gauge: Thicker gauge means a stiffer panel and fewer dents. Standard residential is a lighter gauge; heavy gauge costs more but handles the wind exposure on exposed ridge lines.
- Color and finish: A factory finish with a real warranty beats a painted panel every time in this climate. You’ll choose from a color palette that runs light reflective tones to darker designs.
What Metal Roofing Costs in Daly City, CA
A full metal roof installation in Daly City ranges from $15,000 to $40,000, with most homes settling between $18,000 and $28,000. That’s the number before you get specific, so here’s what moves it.
- Roof size and pitch: A larger footprint or a steep pitch adds labor and time. Simple gables cost less than complex hips and valleys.
- Existing condition: Rotted decking, damaged fascia, or a second old roof layer to strip adds to the tear-off and repair side of the bill.
- Material grade: Aluminum and standing seam sit at the top; exposed-fastener steel at the bottom. Stone-coated falls in between.
- Hillside access and prep: Steep lots above the Mission Street corridor need more staging, safety rigging, and perimeter detailing than a flat-lot roof.
- Permit and inspection scope: The permit and required inspections are part of the number; we pull them and schedule them for you.
Your written estimate lists panels, underlayment, trim, flashing, tear-off, decking line items, and disposal as separate lines, so nothing hides. What’s typically not included: structural repairs discovered mid-job, replacing gutters, and any rot beyond what inspection turns up. We price those in writing before we touch them. Upfront pricing, no surprises means the number you signed is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City is built almost entirely on the wind-blown sand dunes and steep fog-belt slopes of San Bruno Mountain’s western flank, and that changes a metal roof job from the start. The stock here is mostly post-WWII 1940s to 1960s stucco-over-wood-frame tract homes set into graded hillside cuts on poured slabs, and when we strip a roof on those streets we routinely find sandy fill under the deck and fascia that’s settled out of plumb. The persistent Pacific fog keeps the west side damp year-round with little sun to dry surfaces, so the original decking and the dry-rot in the framing underneath are often worse than the top layer suggests. That’s the whole reason metal is worth the money here: it sheds that marine-layer moisture instead of soaking it up.
Permitting runs through the city and the inspection schedule is a real step in the timeline, not an afterthought, so we build it in from day one. On the steep blocks above Mission Street, the roof detail work is where jobs get won or lost, and the drainage and slope-failure reality of this hillside means the perimeter flashing has to be right. If the roof is part of a Roofing in Daly City scope that touches the envelope, we coordinate it the same way we do our Roofing work, and homeowners often pair this with Window Replacement in Daly City or Impact Windows & Doors in Daly City to close up the moisture paths at the same time. We cover all of Daly City, including the 94015, 94016, 94017, and 94014 ZIPs.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Daly City
A typical Daly City metal roof takes three to seven days on site, plus a tear-off and inspection phase that can add a day or two if the decking needs repair. The hillside prep and perimeter work add time on the steeper lots. Call (833) 997-7759 for a timeline based on your specific roof.
Yes, we pull the permit and schedule the local inspection for your metal roof in Daly City. Permitting is part of the job, not something you chase. That keeps the work documented and the sign-off clean when you sell.
Often yes, but the honest answer is that the deck inspection is what tells us, and on these older Daly City homes we find rot or settled framing more often than buyers expect. If the deck is sound we go right over it with underlayment. If not, we price the repair in writing before proceeding.
Metal roofing in Daly City runs $15,000 to $40,000, with most homes in the $18,000 to $28,000 range. Size, material grade, existing roof condition, and hillside access are what move the number. Call (833) 997-7759 for an exact quote – estimates are free.
Every metal roofing project we do is covered by the 730-Day Done Right Promise, backed by the panel manufacturer’s material warranty. If it’s not done right, we make it right. The finish and material warranty comes from the panel maker and varies by product.
Get a Free Metal Roofing Estimate in Daly City
Call (833) 997-7759 for a free on-site estimate on your metal roof. We’ll measure the roof, inspect the deck under the existing layers, and hand you a written line-item estimate with the permit and inspections spelled out. A live person answers the phone, day or night. No pressure, no vague bids. Just the real number for a roof built to last and backed in writing.
Written by the team at Groundwork Construction Co.