A Groundwork company - serving Oakland, CA
Metal Roofing in San Francisco, CA | Groundwork Construction Co. of Oakland

Metal Roofing in San Francisco - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in San Francisco: What the Job Actually Involves

Metal roofing in San Francisco runs $17,700 to $47,200 for a full residential install, and most homes take two to four weeks from tear-off to final inspection once the fog breaks long enough to work. The number swings mostly on square footage, panel type, and how much of the old roof and decking has to come off first. If you’re pricing a metal roof for a Victorian or Edwardian in the Mission, Noe Valley or the Haight, call (833) 997-7759 and we’ll walk the roof, measure it, and put real numbers in writing before anything gets ordered.

Call (833) 997-7759

How a Metal Roof Goes On, Start to Finish

Every metal roof we install moves through the same five stages. Here’s what happens and what you’ll be deciding along the way.

Stage 1: Inspection and measurement (day 1). We get on the roof, check the decking, look at rafters, chimney flashing, and any skylights, and take exact measurements off the panel layout. This is also when we look for soft spots and rot, which matters on San Francisco’s older wood-frame homes. You’ll choose panel profile and color at this point, because lead time on some finishes runs several weeks.

Stage 2: Tear-off and deck repair (days 2 – 4). Old roofing comes off down to the sheathing. Rotted or sagging decking gets replaced and nailed flush before anything new goes down. On a Victorian-era roof, expect to find at least one section of soft decking near a chimney or valley where water has been getting in slowly.

Stage 3: Underlayment and ice-and-water barrier (day 5). A high-temperature synthetic underlayment goes down across the whole deck, with self-adhered membrane in the valleys and around penetrations. Coastal moisture drives this step; skip it and condensation attacks the underside of the panels.

Stage 4: Panel installation and flashing (days 6 – 14). Panels get set, fastened, and seamed per manufacturer spec, then flashing is installed at the ridge, eaves, chimney and sidewalls. This is the weather-tightness stage, and it’s where craftsmanship shows up years later.

Stage 5: Final inspection and walkthrough (day 15+). We run through the install, confirm fasteners and penetrations are correct, and walk you around the roof. Most jobs pass inspection on the first visit when the flashing detail is right from the start.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

The choices that change both the look and the cost are fewer than you’d think:

  • Standing seam vs. exposed fastener panels. Standing seam hides the fasteners behind raised seams and lasts decades longer with far less leak risk; exposed-fastener panels cost less upfront but rely on rubber washers that eventually dry out. On coastal fog, that washer failure comes faster.
  • Steel vs. aluminum vs. copper. Steel is the workhorse: strong, paintable, and the most cost-effective. Aluminum resists salt air and coastal corrosion better, and copper is the premium choice for historically sensitive facades, at a premium price.
  • Kynar vs. standard paint finish. A Kynar 500 finish holds color far longer under UV and ocean air than a standard baked-on paint. Worth the upgrade on a home you plan to keep.
  • Panel profile and color. A low-profile seam suits a clean modern roofline; a raised seam reads more traditional. Color is a design decision you’ll live with for 40+ years, so we order samples before committing.
  • Concealed vs. exposed fastening, and the underlayment grade. Both get decided at the estimate stage, and both change the price.

Homeowners weighing a window upgrade at the same time often pair this with Window Replacement in San Francisco so the exterior work happens in one coordinated stretch.

What Metal Roofing Costs in San Francisco, CA

A full metal roof installation here lands between $17,700 and $47,200. That’s a wide window on purpose, because the variables below can nearly triple the number on a bigger, older or more complex roof.

What pushes a job toward the low end: a simple gable roof, steel panels with standard finish, intact decking, and no skylights or complicated valleys. What pushes it toward the high end: a large footprint, multiple valleys and dormers, copper or aluminum panels, extensive deck replacement, or chimney and skylight flashing that needs rebuilding. A second-story roof or steep pitch adds labor time and safety rigging, and that shows up on the bid too.

A written estimate from us spells out the square footage, panel type, finish, underlayment, deck repair allowance, flashing, and labor. What it doesn’t include unless we call it out: framing or structural repair, skylight replacement, and any permit-related historic review fees if a Planning trigger applies. Upfront pricing means the number on the signed estimate is the number you pay when nothing structural is uncovered mid-job, and we flag that before we start, not after.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What San Francisco Homes Specifically Do to This Job

Almost every metal roof we put on here sits on a pre-1906 wood-frame Victorian or Edwardian packed onto a narrow lot, and that changes the job in ways it wouldn’t in Daly City or South San Francisco. Decking is often original, so rot and soft spots under old flashing are common. The city’s Soft-Story and seismic retrofit rules don’t govern the roof itself, but they do mean a roof replacement often gets paired with structural bracing work once the attic is exposed. Planning Department historic-review triggers can add months if the building sits in a historic district, so we check that before we quote a timeline.

The fog matters too. Damp, cool winters mean we schedule tear-off and deck repair around rain windows, and a roof that sits open overnight in the wet season is a real risk. In a Noe Valley Victorian, panels and underlayment have to be installed in dry stretches, and coastal moisture on exposed framing makes rot inspection non-negotiable. That’s the environment metal handles better than almost any other roof, which is why it appeals on these older homes. When the metal work is part of a broader scope, it’s often folded into our full Roofing in San Francisco plan for the property. You can see the wider Roofing capabilities we bring, and our team covers all of San Francisco from the waterfront to the fog line at Twin Peaks.

Serving San Francisco, CA – Our Local Coverage Area

We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Metal Roofing in San Francisco

Get Your Metal Roofing Estimate in San Francisco

Call (833) 997-7759 to schedule a free on-site estimate for metal roofing in San Francisco. We’ll inspect the deck, measure the roof, talk through panel and finish options, and hand you a written line-item quote before any work is scheduled. Homeowners pairing the roof with an exterior upgrade also ask about Impact Windows & Doors in San Francisco so both jobs land in one plan.

Written by the team at Groundwork Construction Co.

Why San Francisco Chooses Groundwork Construction Co. of Oakland

We set the standard for metal roofing in San Francisco.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in San Francisco

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Francisco Customers Say

Trusted by homeowners across San Francisco and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Metal Roofing in San Francisco?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in San Francisco.

(833) 997-7759

Request a Free Estimate in San Francisco

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch