Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Daly City: What It Takes and What It Costs
Window installation in Daly City usually runs $4,500 – $15,000 for a typical single-family home, and most jobs take one to two days on site once materials land. You’re not just swapping glass: on this side of San Bruno Mountain the walls themselves need attention, because sand-built, fog-soaked homes hide rot behind stucco. We pull the permit, do a line-item quote, and stand behind the work with our 730-Day Done Right Promise. Call (833) 997-7759 to set up a free on-site measurement.
How a Window Installation Actually Runs, Stage by Stage
We don’t hand you a vague “we’ll get to it” timeline. Here’s the real sequence for a full-house or partial window installation in Daly City, with what you decide at each point.
Stage 1: Measure and scope (about 60 – 90 minutes)
We open the existing windows, check the framing, probe for soft wood, and measure every rough opening. Photographs get taken of anything we suspect. You decide the material and the configuration here, and you get a written number before anyone orders a thing.
Stage 2: Ordering and lead time (3 – 8 weeks)
Custom sizes and Andersen or Marvin lines run longer than stock. Standard sizes come faster. This is when you pick color, finish, opening style, and whether you’re adding a unit or just replacing an existing opening. No demo happens until the units are on site.
Stage 3: Demo and dry-fit (day 1)
The old unit comes out, the opening gets cleaned down to solid framing, and we dry-fit the new window. If we find rot in the sill or the rough opening, that’s the moment it surfaces, not two weeks later. We show you photos and quote the fix before we close it back up.
Stage 4: Install, flash, and seal (day 1 – 2)
New windows get shimmed, squared, anchored, and flashed correctly, then the stucco or siding is patched and sealed. Fog-belt homes live and die on this step. A window that isn’t flashed properly leaks for years before anyone notices.
Stage 5: Finish and walkthrough (day 2 – 3)
Trim goes on, caulk gets tooled, and we clean the glass. Then we walk every window with you, demonstrate operation, and hand over the documentation. You sign off on what you can actually see and use, not a punch list of promises.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before You Sign
- Vinyl: The budget-friendly pick, good thermal performance, low maintenance. It’s a practical choice for rentals and corridors along Mission Street. It doesn’t hold up to heavy sun exposure the way some owners want, and it can’t be painted a different color later.
- Wood-clad (Andersen, Marvin): Real wood inside, aluminum or vinyl outside. Looks right on 1940s – 60s stucco tract homes and holds resale value. Costs more, and you’ll pay a premium for custom sizes.
- Fiberglass: Dimensionally stable, doesn’t expand and shrink with the fog cycle. A solid middle ground when the existing opening is out of square.
- Configuration: Single-hung, casement, slider, or fixed. Each swings the price, and each has a real effect on how the room feels. Casements typically cost more than single-hungs of the same size, but they seal tighter.
- Glass package: Double-pane is standard. Low-E coatings and argon fill help with the marine layer’s chill and condensation. On west-facing walls, they’re worth the upcharge.
What Window Installation Costs in Daly City, CA
For a whole-house window installation in Daly City, plan on $4,500 – $15,000. A single window or two lands in the low hundreds per unit installed, and a full home with custom wood-clad units pushes toward the top of that range. Impact-rated packages, where your situation calls for them, sit in their own bracket at $8,000 – $25,000.
Here’s what moves the number:
- Count and size: More openings, more cost. Oversized or odd-shaped openings cost more per unit.
- Existing condition: Soft framing, rotten sills, or a wall that needs stucco repair adds labor. In Daly City this is often the biggest swing.
- Material grade: Vinyl sits at the low end; Andersen and Marvin at the high end.
- Structural changes: Enlarging an opening or adding a new one means framing and possibly engineering. Doing that? Factor it into a Windows & Doors in Daly City scope discussion.
- Permit scope: One window may not require a permit; a full replacement package typically does. We pull it either way.
Your written estimate is line-item: units, labor, flashing and sealant, trim, permit, and disposal. Not included: structural repairs we can’t see until demo, and interior paint touch-up unless you ask for it.
See the difference
Before
After
Before
After
Before
AfterWhy Daly City Homes Make This Harder Than It Looks
Daly City sits on wind-blown sand and steep slopes on the western flank of San Bruno Mountain. That geology does not care about your budget. Homes here were mostly built between the 1940s and 1960s as stucco-over-wood-frame tract houses and low-rise apartments, packed along El Camino and Mission Street, many on shallow slab foundations cut into the hillside. On the steep streets above the Mission corridor, we routinely open up a window and find original 1950s framing with no real depth of foundation under it, and fog-soaked west walls that have been rotting from the outside in for years.
That’s why we lead with a probe, not a promise. It’s also why the sand-frost and drainage realities mean every install gets flashed to shed water rather than trap it. If your project turns into wider envelope work, our Windows & Doors service is the place to start. We cover Daly City across ZIP codes 94014, 94015, 94016, and 94017, and homeowners often pair window work with a Wood Fence in Daly City to finish the yard. Some also add a Chain Link Fence in Daly City on the property line while we’re already on site.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Installation in Daly City
A typical home takes one to two days on site once the units arrive, and custom orders add three to eight weeks of lead time. We schedule demo only after materials are delivered. Call (833) 997-7759 to get a real timeline for your home.
Usually yes, for a full replacement package, and often no for like-for-like single-window swaps. The exact answer depends on scope and the local building department’s read. We pull the permit and pass inspection as part of the job, so you’re never the one on the phone with the city.
In most cases, yes, because a like-for-like window goes into the existing opening with no plumbing or electrical work. It changes the moment you enlarge an opening or move a wall. Those are separate scopes, and we’ll tell you before you sign.
Most homes land between $4,500 and $15,000, and impact-rated packages can reach $8,000 – $25,000 depending on count and material. The biggest variable here is hidden rot behind the stucco. Call (833) 997-7759 and we’ll give you an exact line-item number after a free on-site measure.
Every window installation we do in Daly City is covered by our 730-Day Done Right Promise: if it isn’t done correctly, we come back and make it right. Manufacturer warranties on the units add their own coverage on top. We put that in writing.
Ready to Price Your Window Installation?
Call (833) 997-7759 to schedule a free on-site estimate for window installation in Daly City. We’ll measure, probe for hidden damage, and hand you a written line-item quote with the permit and materials spelled out. No surprise change orders. Upfront pricing, backed by the 730-Day Done Right Promise. A live person answers, day or night.
Written by the team at Groundwork Construction Co.