Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Burlingame, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Burlingame typically runs $3,500 to $10,000 and takes 5 to 10 working days from demo to final walkthrough. We remove the old tub, prep and waterproof the alcove, set a new pan or tile base, run the drain and valve trim, then finish the walls and glass. Homes in Burlingame with original 1920s plumbing can push toward the high end when the drain has to be relocated or the framing behind the tub has old water damage. Call (833) 997-7759 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most contractors quote the job and hand you a start date. Here’s the sequence behind that date so you know what’s happening in your house and when you have to make a decision.
Stage 1: Demo and inspection (day 1)
We pull the tub, the surround, the valve trim, and enough wall to see the framing and the drain. On Burlingame’s older single-family homes, this is where we find out whether the alcove is 60 inches square or an odd 56 that needs custom work. You decide nothing here. We photograph everything before it gets covered.
Stage 2: Rough plumbing and framing corrections (days 1 – 2)
If the drain moves to reach the center of a new shower footprint, that’s a plumbing change and it needs a permit. If the framing is soft from a leak behind the old tub, we sister new studs in. This is the stage where the budget can move, and we call you before we spend a dollar on it. You approve or decline each correction in writing.
Stage 3: Waterproofing (days 2 – 3)
A shower lives or dies on waterproofing. We set a sloped pan, bond the membrane to the drain flange, and band every corner and seam. This stage gets a rough inspection before any tile goes up. You decide your base material here: acrylic pan, tile-and-mortar pan, or a curbless base if this is part of an aging-in-place plan.
Stage 4: Wall finish and tile (days 3 – 7)
Tile goes up over the membrane. The wall field, niche, bench, and border all get set now. Grout and sealant go on after the thinset cures, which is a two-day wait on some large-format products. You pick tile size and layout before day 1, not during week 2.
Stage 5: Fixtures, glass, and inspection (days 7 – 10)
Valve trim, showerhead, drain cover, and the glass enclosure go in last. We call for the final inspection, test the drain slope with a bucket of water, and walk you through the shower before we leave. That final walkthrough is where the 730-Day Done Right Promise starts: if the drain weeps or a tile pops, we come back and we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your New Shower
The choices that actually change your daily experience, and what each one costs you in money or maintenance:
- Acrylic pan and surround: the fastest and cheapest path, with a sealed one-piece base that won’t leak at the seams. It reads as a builder shower, and it can’t be repaired if it cracks. Good fit for a rental or a hall bath.
- Tile over a waterproofed pan: the look most Burlingame homeowners want in a primary bath. Large-format porcelain runs cooler to the touch and has fewer grout lines to scrub. Costs more in labor and takes an extra two to three days.
- Curbless entry: no threshold to step over, which matters if someone in the house is aging in place. It requires recessing the subfloor or raising the whole bathroom floor, so it’s the highest-labor option here.
- Frameless glass: the enclosure a custom Burlingame bath usually calls for. Framed glass is cheaper and hides a slightly out-of-square opening; frameless needs the walls true within a quarter inch. A local glass shop like Mr-Glass can template the opening once tile is set.
- Valve and trim: keep the existing valve if it’s a modern pressure-balance unit and the cartridge has life left. A new thermostatic valve costs more but holds temperature better in a house with older piping that fluctuates.
What Tub-to-Shower Conversion Costs in Burlingame, CA
Expect $3,500 to $10,000 for a tub-to-shower conversion in Burlingame. That range is real: the low end is an acrylic swap in a standard alcove, the high end is a tiled curbless shower with relocated plumbing and frameless glass.
Five things move that number:
- Footprint change: staying inside the existing tub alcove is the cheapest path. Widening or converting a tub-plus-closet into a larger shower adds framing, drywall, and often a permit revision.
- Drain location: a center drain under a new pan is plumbing work. Moving it a few inches can mean opening the floor below, which on Burlingame’s raised-foundation homes is a crawlspace job.
- Condition behind the wall: water damage, old galvanized supply lines, or knob-and-tube-era wiring that has to be re-routed all get added before anything gets covered.
- Material grade: acrylic is the budget path. Porcelain tile, natural stone, and frameless glass climb quickly. A tile shower typically adds $1,500 to $3,000 over acrylic in labor and material.
- Permit scope: a straight fixture swap may not need one; moving the drain or valve does. We pull permits and call for inspection as part of the job, and the fee is line-itemed so you see it before you sign.
Your written estimate breaks out demo, rough plumbing, waterproofing, tile, glass, fixtures, and permit fee as separate lines. What’s usually not included: a full bathroom remodel beyond the shower alcove, a new vanity, or floor tile outside the shower footprint. Those are a separate scope. If you’re weighing the shower against a larger project, our Bathroom Remodeling service covers the whole room.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to This Job
Burlingame’s core is early-1900s through 1940s single-family housing: Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages. In the Easton Addition and around Burlingame Park, opening a wall behind a tub routinely reveals previous remodel layers stacked on the original framing, so what looked like a one-week conversion can turn into foundation bolting, shear, or electrical work the original scope never anticipated. Those neighborhoods also carry more design-review scrutiny on exterior work, so anything that touches a window or exterior wall on a historic home gets planned around it here, not figured out mid-job. The weather shapes the details too. Burlingame sits between the bay and the coastal hills, so damp winters and fog-driven morning moisture make the vapor barrier and the sealant joints on the tile the parts that fail first when a job is rushed. That’s why we spend real time on waterproofing before a single tile gets set. We cover all of Burlingame, ZIP codes 94010 and 94011.
Tub-to-Shower Conversion Questions We Get in Burlingame
How long does a tub-to-shower conversion take in Burlingame?
A standard conversion takes 5 to 10 working days. The wide swing comes from permit inspection scheduling and how much correction the wall reveals after demo. Call (833) 997-7759 for a timeline on your specific bathroom.
Do I need a permit for a tub-to-shower conversion in Burlingame?
A straight fixture swap may not need one, but moving the drain, changing the valve, or altering framing does, and you’ll need to check the requirements for your address. We pull the permits and pass the inspection as part of the job. Call (833) 997-7759 if you’re unsure whether your address needs one.
Can it be done without moving the plumbing or structure?
Yes, and it’s the cheapest and fastest version of this job. Staying inside the existing tub footprint with a pan that fits the drain location keeps it to waterproofing, tile, and trim. Call (833) 997-7759 to find out if your alcove allows it.
What does a tub-to-shower conversion cost in Burlingame?
Most Burlingame conversions run $3,500 to $10,000. Acrylic sits at the low end, a tiled curbless shower with frameless glass sits at the top. Call (833) 997-7759 for an exact quote; estimates are free.
What warranty covers the work?
Every tub-to-shower conversion is covered by our 730-Day Done Right Promise: if the drain weeps, the tile pops, or the waterproofing fails, we come back and make it right within that window. Call (833) 997-7759 to schedule your free estimate and see the written terms before you commit.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Get a Free Tub-to-Shower Conversion Estimate in Burlingame
Call (833) 997-7759 to schedule a free on-site estimate. We’ll measure the alcove, photograph the plumbing, and give you a written line-item price for a tub-to-shower conversion in Burlingame, plus a clear timeline. No vague bid, no surprise change orders. We answer the phone live, 24/7.
Written by the team at Groundwork Construction Co.