Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Burlingame, CA: What It Costs and How Long It Takes
Window replacement in Burlingame runs $4,500 – $15,000 for a typical whole-house project, and most homes are measured, permitted and fitted out in three to five working days from first cut to final trim. On the older Craftsman and Spanish Colonial houses that make up most of Burlingame, the job is really two jobs: pulling the original sash and working the opening so it’s square, flashed and weather-tight before the new units go back in. Call (833) 997-7759 and we’ll walk your rooms with you and put a written, line-item number in your hands.
How a Burlingame Window Replacement Actually Runs, Day by Day
Nobody wants a vague “we handle everything.” Here’s the sequence we follow on a Burlingame window replacement, and where you make a decision.
Stage 1 – Walkthrough and measurement (1 to 2 hours)
We open and close every operable sash, check the frames for rot, and note which openings are out of square. On a raised-foundation Burlingame home that means poking at the sill plates and the surrounding stucco or wood siding, because a soft sill changes the scope. You decide at the end of this visit which rooms are in scope now and which can wait.
Stage 2 – Order and permit (roughly 3 to 6 weeks of lead time)
Custom units in a 1920s Craftsman mean a build-to-size order, not a stock pick, and that lead time is real. We file the paperwork and pull the permit, sequence the delivery window around your schedule, and confirm flashing and trim stock so the opening isn’t sitting exposed. You sign off on the final spec sheet here.
Stage 3 – Protection and prep (half a day)
Floors get rosin paper, furniture gets shifted and covered, and we set up the work zone. Then the old units come out – sash, frame and all where the opening allows – and we cut back to sound substrate around each opening. This is the stage that exposes surprises: previous patch jobs, a shimmed frame, or siding that’s gone soft behind the trim.
Stage 4 – Fit, flash and finish (1 to 3 days)
New units are set, shimmed and plumbed, then flashed and sealed at the head, jambs and sill – the part that matters most on Burlingame’s wood-sided and stucco houses. Interior trim, sill return and exterior trim go back on to match the existing profile as closely as the new unit allows. You inspect each room before we move to the next.
Stage 5 – Inspection, touch-up and handoff (half a day)
The city inspection gets scheduled, we touch up paint and caulk lines, and we walk the job with you opening every operable sash. We hand over the warranty paperwork on the units and our own written workmanship guarantee together, so nothing ends up in a drawer unread.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape a Burlingame Window Replacement
Most of your decisions happen at the walkthrough, before anything is ordered. These are the honest trade-offs on a Burlingame job:
- Material – vinyl vs. fiberglass vs. wood-clad: Vinyl is the value pick and fits a tighter budget, but on a historic home it can read flat next to original trim. Fiberglass handles moisture well and holds a crisp profile. Wood-clad – the kind of construction Andersen and Marvin build – is what most of Burlingame’s older homes want, at the higher end of the range.
- Full-frame vs. insert replacement: Insert units are faster and cheaper, but they only work if the existing frame is sound and square. On a 1920s home with a settled opening, full-frame is often the only way to get a straight, sealed result.
- Glazing package: Double-pane with low-E and argon is the standard spec here given the cool, fog-heavy climate. That’s a comfort and condensation decision as much as an energy one.
- Finish and profile: Matched muntins, sash weight and trim profile matter on Burlingame Park and Easton Addition homes. The closer the profile matches, the less a new window announces itself.
- Specialty and impact-rated units: Impact-rated glazing is a smaller slice of the Burlingame market than it is further south, but it’s worth asking about if you’re near a slope or want the added peace of mind.
This work often sits inside a larger plan. When new windows are part of a full Windows & Doors in Burlingame scope, we sequence them together so the exterior gets closed up once, not twice – and homeowners sometimes pair it with Vinyl Fence in Burlingame or Aluminum Fence in Burlingame while the crew’s already on site. If you’d like to see our wider Windows & Doors work, that’s where to start.
What Window Replacement Costs in Burlingame, CA
A typical whole-house window replacement in Burlingame lands between $4,500 and $15,000. Where a job sits in that range is driven by four variables:
- Count and size of openings: Each unit adds cost. Large picture windows and custom openings cost more than standard double-hung units.
- Frame condition: Sound frames can take insert units; rotted sills or out-of-square openings push toward full-frame replacement and added carpentry.
- Exterior material: Stucco patching and trim work on Burlingame’s many stucco and wood-sided homes adds labor versus a simple siding cut-in.
- Material grade: Vinyl sits at the low end; fiberglass and wood-clad units push toward the top.
- Scope: Keeping the job to the windows – without moving structure or wiring – keeps it in the standard range. If the work involves opening walls, that’s a different scope and gets priced separately.
A written estimate from us breaks out the units by opening, flashing and sealing, trim and carpentry, permit, disposal and paint touch-up. It does not hide a mid-job change order; the number you see is the number you pay. Call (833) 997-7759 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to a Window Replacement
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and that changes the job. The houses in Burlingame Park, downtown and Easton Addition are largely early-1900s through 1940s single-family homes – Craftsman, Spanish Colonial Revival and Tudor – and many carry original fenestration that the city isn’t eager to see lost. Replacing windows on these homes means matching the original profile, trim depth and finish closely enough that design review doesn’t blink, and it means planning for the layers already there.
Open a wall in one of these homes and you’ll often find previous remodels stacked on the original framing. That’s why we don’t file a permit until we’ve opened a sample opening and seen what’s actually behind it. Sits between the bay and the coastal hills, Burlingame also gets cool, fog-influenced summers and damp winters with persistent morning moisture, so flashing and weatherproofing at the sill and head aren’t optional – they’re what keeps a new window from going soft at the bottom years down the road. Sill rot is the failure we see most on these homes. We cover Burlingame and the immediate neighbors including Foster City and South San Francisco.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Burlingame
Most Burlingame window replacements run three to five working days on site once the units are delivered, with three to six weeks of lead time before that for custom orders and the permit. Call (833) 997-7759 for a firm timeline on your home.
Replacing windows in kind on a single-family home often doesn’t require a permit, but it depends on the opening and whether the design changes. We check the requirement for your address before we start and pull the permit when one’s needed, so there’s no surprise at inspection.
Yes. Window replacement is a window-for-window swap; we don’t move plumbing or structure as part of it. If a walkthrough turns up a hidden problem – a soft sill, an out-of-square opening, an unexpected previous layer – we quote that fix before proceeding, in writing.
Expect $4,500 to $15,000 for a typical whole-house project, depending on unit count, frame condition, exterior material and grade. Call (833) 997-7759 for an exact quote – estimates are free and line-item detailed.
Every window replacement we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – on top of the manufacturer’s warranty on the units. We hand over both in writing at the walkthrough.
Get a Free Estimate on Window Replacement in Burlingame
If you’re ready to price a window replacement in Burlingame, call (833) 997-7759. We’ll schedule a free on-site estimate, measure every opening, talk through the material options and hand you a written, line-item quote that covers units, flashing, trim, permit and disposal – no surprises. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. Calls are answered by a live person, and the estimate is free.
Written by the team at Groundwork Construction Co.