Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Richmond, CA: What the Job Actually Involves
Cabinets and countertops in Richmond, CA typically run $14,000 – $45,000 for a full replacement, with most single-kitchen jobs landing in the $18,000 – $28,000 range once you account for the plumbing and framing surprises older Richmond homes tend to hide. The work takes three to six weeks from demolition to final countertop install, and the timeline is driven less by the cabinets themselves than by what’s behind the old ones. Call (833) 997-7759 for a free on-site estimate before you commit to a number.
We keep a written, line-item quote in front of you the whole way. No change orders you didn’t approve, and every job is backed by our 730-Day Done Right Promise.
How we run a cabinet and countertop job, stage by stage
This is a sequential trade. Cabinets go in before countertops, and the countertop template can’t be cut until the cabinet boxes are set and level. Skip a step and you’ll be paying to redo one of them. Here’s the real sequence.
Stage 1: Demo and site check, days 1 – 2
We pull the old cabinets, countertop, and backsplash, then inspect what’s underneath: the wall behind the uppers, the subfloor under the base run, and any plumbing rough-in. On Richmond homes built before 1960, this is where you find the surprises. You decide at this point whether to open a wall for a layout change or keep the existing footprint. Keeping it saves both time and money.
Stage 2: Rough-in and prep, days 3 – 5
If you’re relocating the sink or adding a dishwasher, our plumber and electrician move the supply lines, drain, and dedicated circuits before anything gets set. Wall repair and patching happen here too, along with priming the surfaces the new cabinets will hang on. You sign off on the final appliance and fixture positions during this window, because once the boxes are in, moving them is a two-day setback.
Stage 3: Cabinet install and leveling, days 6 – 9
Base cabinets first, then uppers, shimmed and leveled to within a sixteenth of an inch across the run. We hang doors and drawers, check the reveals, and confirm every cabinet operates smoothly before moving on. This is also when the countertop fabricator comes out to template: they measure the exact footprint, mark the sink cutout, and note any wall that isn’t perfectly square, which in Richmond’s older housing stock is more common than not.
Stage 4: Countertop fabrication and install, days 10 – 17
The fabricator cuts the slab in their shop, which takes roughly a week for stone and quartz and a few days for laminate or solid surface. On install day, the pieces come in, get set on the cabinets, seamed, and the sink is cut in. You’ll want to be home to confirm the seam placement if you’re using a large-format material.
Stage 5: Backsplash, trim, and punch list, days 18 – 25
Backsplash goes in after the countertop so the tile sits cleanly against the finished edge. Then trim, caulk, hardware, and a walkthrough where we check every drawer, door, and seam with you. Anything that needs a fix gets noted and scheduled before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Cabinet and countertop selection is where a budget quietly drifts. These are the real forks in the road.
- Stock vs. semi-custom cabinets: Stock boxes cost less and ship fast but limit your sizes and finishes. Semi-custom (like KraftMaid) lets you hit odd wall dimensions and match a specific door style, which matters in Richmond’s older homes where no two walls are the same length. The trade-off is a two- to four-week lead time.
- Reface vs. replace: Refacing keeps the existing boxes and swaps doors, drawer fronts, and veneer. It’s cheaper and faster, but only if the cabinet structure is solid. Warped or water-damaged boxes from an old plumbing leak mean replacement is the honest answer.
- Quartz vs. granite vs. laminate: Quartz (Cambria and similar) is non-porous, needs no sealing, and holds up to daily Richmond humidity. Granite is durable and unique per slab but needs periodic sealing. Laminate is the budget play and has come a long way, though it won’t tolerate a hot pan set down on it.
- Butcher block and solid surface: Warm underfoot and repairable, but butcher block needs oiling and solid surface scratches more easily than stone. Good fits for a secondary prep area.
- Island additions: A freestanding or built-in island adds prep space and storage. Worth it in a wider kitchen; a squeeze in a narrow Richmond galley.
What Cabinets & Countertops costs in Richmond, CA
Expect $14,000 – $45,000 for the full job. The pieces break down like this:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a job toward the low end: keeping the existing footprint, stock cabinets, laminate or mid-grade quartz, and no plumbing or electrical moves. What pushes it toward $45,000: semi-custom cabinetry across a large run, premium stone with a waterfall edge, a relocated sink, a new island, and the wall and floor repair that comes with opening a room in a pre-1950 house.
Five variables move the number most: total linear feet of cabinetry, whether the sink or range moves, the condition of the wall and subfloor behind the old install, the material grade you pick, and whether the job needs a permit for any structural or plumbing change. Your written estimate lists every line and the assumptions behind it, so the number you see is the number you pay. Our kitchen remodeling service handles the wider scope if you’re going further than cabinets.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond homes specifically do to this job
Richmond is a former WWII shipyard boomtown, and its kitchen stock shows it. Rows of wartime duplexes and bungalows in ZIPs like 94801 and 94804 were built fast and small, and a lot of them still have the original cabinet boxes, aging galvanized plumbing behind the sink wall, and pier-and-post foundations under the floor. When we open a kitchen here, we plan for the wall behind the uppers to need patching and for the plumbing to be at the end of its service life.
The postwar duplex layout adds one wrinkle that catches contractors who don’t work Richmond often: many of these units share a single water service line with the adjoining unit. If your cabinet and countertop job involves adding a prep sink or relocating the main sink to a different wall, that change can trigger a requirement to separate the metering, which is a permit and plumbing conversation that has to happen before demo, not after. We flag it during the estimate walkthrough. The marine climate matters too, less inside the kitchen than at the penetrations, but cabinets set against an exterior wall in a foggy neighborhood will pull moisture if the flashing and venting behind them are wrong. Our Richmond service page covers the neighborhoods we work across.
If you’re already pulling cabinets, this is the moment homeowners often pair the work with Walk-In Showers & Shower Remodeling in Richmond or a Tub-to-Shower Conversion in Richmond to get the whole house updated in one pass, or fold it into Kitchen Remodeling in Richmond for the full scope.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions: Cabinets & Countertops in Richmond
Most jobs run three to six weeks from demo to final walkthrough. Stone and quartz countertops add about a week for fabrication, and older Richmond homes can add a few days if the walls or subfloor need repair before cabinets go in. Call (833) 997-7759 for a timeline tied to your actual kitchen.
Straight cabinet and countertop swaps usually don’t require a permit. The moment you move plumbing, add a circuit, or touch structure, a permit is required, and the pier-and-post foundations common in older Richmond homes make any structural change its own permitting conversation. We tell you up front which parts of your job need one.
Yes, and keeping the sink and range in place is the single biggest cost saver. It skips the plumber, the electrician, and most of the permit scope, which can cut several thousand dollars off the job. We’ll show you how a smarter cabinet layout can improve storage without relocating anything.
The full job runs $14,000 – $45,000, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Material grade and plumbing moves drive most of the spread. Call (833) 997-7759 for an exact written quote.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, and that’s in writing before work starts.
Get a free cabinets and countertops estimate in Richmond
Call (833) 997-7759 and a live person picks up, day or night. We’ll schedule a free on-site estimate, walk your kitchen, check what’s behind the old cabinets, and hand you a written line-item quote with no surprises. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.