Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Burlingame, CA: What It Actually Takes
Most window installation projects in Burlingame run $4,500 to $15,000 for a typical whole-house replacement, with impact-rated units landing in the $8,000 to $25,000 range. A standard single-window job takes one day; a full-house installation on a 1920s Easton Addition bungalow usually runs three to five days once you account for framing surprises behind the trim. Call (833) 997-7759 for a free on-site estimate, and we’ll give you a written line-item number before anyone touches a sill.
How our window installation process runs, stage by stage
Window installation isn’t complicated. What makes it hard is the 100-year-old wall cavity hiding behind your existing casing. Here’s the real sequence we follow on Burlingame homes.
Stage 1: Measure and confirm (day 1, about 90 minutes). We measure every opening at three points, check for racking and out-of-square frames, and photograph the existing flashing detail. You decide here whether each opening gets a full-frame replacement (new jambs and trim, more invasive) or a pocket replacement (new sash into the existing frame, faster and cheaper but leaves the original weather seal in place). On a Craftsman bungalow with original redwood casing, pocket replacement is often the only way to keep the trim intact.
Stage 2: Permit filing (1 to 3 weeks, depending on scope). Like-for-like replacements typically don’t require a permit, but any change in opening size, new structural header, or egress window does. We handle the submittal and answer plan-check comments. You decide nothing at this stage; you just wait. This is where most timelines get lost, so we file early.
Stage 3: Demo and prep (day 1 of install, half a day per 4 to 6 windows). We remove the old units, cut back failed flashing, and inspect the framing. This is the moment of truth. On Spanish Colonial Revival and Tudor cottages we regularly find second and third layers of remodel stacked on the original 1920s framing, which means the opening needs new blocking, sheathing repair, or a proper weather-resistive barrier before the new window goes in. You decide whether to approve that repair on the spot (we quote it in writing before proceeding) or defer it.
Stage 4: Set, flash, and seal (same day as prep, per opening). New window set plumb and level, shimmed, anchored, flashed at the head and sill, low-expansion foam at the perimeter, and backer rod plus sealant on the exterior. This is the stage that decides whether you get a draft-free window for 30 years or a leak in year three. No homeowner decisions, but ask us to show you the flashing before the trim goes back on.
Stage 5: Interior trim, exterior finish, and inspection (days 2 to 5). Casing reinstalled or replaced, exterior stops and paint touched up, glass cleaned, and the job walked with you window by window. If the permit was pulled, we schedule the inspection and meet the inspector on site. You sign off only after you’ve operated every sash and latch yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The window choices you’ll actually weigh
- Frame material. Vinyl is the economical pick and holds up fine in Burlingame’s mild range, but it can’t be painted and won’t match historic profiles. Wood-clad aluminum (Andersen and Marvin both make excellent versions) gives you a real wood interior with a low-maintenance aluminum exterior, which suits the Easton Addition and Burlingame Park homes where interior character matters. All-wood is beautiful and needs repainting on a coastal-adjacent schedule.
- Glass package. Dual-pane with a low-E coating is standard on most Bay Area installs. Add argon fill and a warm-edge spacer for better thermal performance on north-facing windows that see persistent morning damp. Triple-pane is rarely worth the upcharge here; the climate doesn’t demand it.
- Impact rating. Worth considering even outside a high-wind zone if you want the glass to stay in the frame during a seismic event, which is a real Peninsula consideration.
- Style and grid pattern. Double-hung with a 2-over-2 or 1-over-1 grid matches the period of most Burlingame stock. Casements save floor space and open fully for the fog-season cross-breeze.
- Hardware finish. Small line item, big visual return on older homes. Bronze and oil-rubbed finishes read period-correct; brushed nickel reads contemporary.
What Window Installation costs in Burlingame, CA
Whole-house window replacement in Burlingame runs $4,500 to $15,000. Impact window installation runs $8,000 to $25,000. Per-window on a standard replacement, plan on roughly $600 to $1,400 installed, and more on oversized or custom-profiled openings.
Here’s what pushes a job to the low versus high end:
- Number and size of openings. Twelve standard double-hungs is a different job than four oversized picture windows with custom grids.
- Existing condition. Rotted sills, failing sheathing, or layered remodels add labor. On older Burlingame homes, expect some of this.
- Frame modification. Enlarging or reducing an opening means structural work, which means engineering and permit scope.
- Material grade. Vinyl to wood-clad is a meaningful jump; custom historic profile matching jumps again.
- Permit scope. Like-for-like replacement vs. any structural or egress change.
Every written estimate we produce is line-item: windows, labor, flashing materials, trim, disposal, permit fees where applicable. No bundled lump sum. The number you see is the number you pay, backed by our 730-Day Done Right Promise – if something isn’t right, we come back and make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame’s housing stock does to a window installation
Burlingame is one of the oldest and most architecturally protected suburbs on the Peninsula, and window work here reflects that. The core is dominated by early-1900s through 1940s single-family homes – Craftsman bungalows, Spanish Colonial Revival, and Tudor cottages – many with original knob-and-tube-era wiring and pier-and-beam or raised foundations. In the Burlingame Park and Downtown neighborhoods, replacing a front-facing window often means matching century-old detailing, and on homes in the historic overlay, exterior profile changes may need design review. We factor that timeline in from the start.
The climate shapes the work too. Burlingame sits between the bay and the coastal hills, so you get fog-influenced summers and damp winters with persistent morning moisture. On wood-sided and stucco homes, that means flashing and weatherproofing are not optional extras – they’re the whole ballgame. The failure modes we see most are failed sill flashing on north- and west-facing windows, wood rot under the casing, and old aluminum units that were caulked instead of properly flashed thirty years ago. All of it shows up when we open the wall.
If your window project is part of a larger remodel, it’s covered under our Windows & Doors in Burlingame scope, and homeowners often pair exterior work with a Wood Fence in Burlingame or a Chain Link Fence in Burlingame to finish the yard at the same time.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about window installation in Burlingame
A single window takes one day. A typical whole-house job runs three to five days of installation, plus permit review time if the scope requires it. On older Easton Addition homes with layered remodels, add a day for framing repair.
Like-for-like replacements generally don’t require a permit. Any change to opening size, egress requirements, or structural framing does, and we pull it and meet the inspector on site. Call (833) 997-7759 and we’ll tell you what your specific project needs.
Yes, in most cases. Pocket replacement reuses the existing frame and leaves your interior trim untouched, which is the right call on historic homes where the casing is worth preserving. Full-frame replacement is the better long-term choice when the original frame has rot or isn’t square.
Standard replacement runs $4,500 to $15,000 for a whole house, and impact installation runs $8,000 to $25,000. Frame material, opening count, and hidden framing damage are the biggest swing factors. Call (833) 997-7759 for an exact quote – estimates are free.
Every installation is covered by our 730-Day Done Right Promise on workmanship, and the window manufacturer’s product warranty applies on top. If a seal, a sash, or a flashing detail fails within that window, we come back and fix it.
Get a free window installation estimate in Burlingame
We’ll come out, measure every opening, show you the flashing detail we plan to use, and hand you a written line-item estimate – free, no pressure, no surprise change orders. Calls are answered by a live person 24/7, so you’re never stuck waiting until Monday. Call (833) 997-7759 to schedule your estimate. If your project reaches past windows into a broader scope, our Windows & Doors service covers the rest, and you can see everywhere we work on our Burlingame page.
Written by the team at Groundwork Construction Co.