Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in San Francisco: What the Job Actually Involves
Impact window and door installation in San Francisco runs $9,440 to $29,500 for a typical whole-home package, and most single-family projects take three to five working days of on-site labor once materials land. The work replaces your existing glazing and door slabs with laminated or laminated-insulated assemblies rated to hold together under wind-borne debris, and it is usually paired with new framing, flashing, and weather sealing because the old openings rarely survive demo intact. Call (833) 997-7759 for a free on-site estimate before you commit to a spec.
How We Run an Impact Windows & Doors Project, Stage by Stage
Impact work is unforgiving of shortcuts. The window is only as good as the rough opening it sits in, so we sequence deliberately and don’t rush the parts that matter.
- Stage 1 – Measure and site review (day 1, 2 – 3 hours). We open every window, check the rough openings, look at header condition on the old double-hungs, and confirm door swing clearances. You decide the product line and whether you want the trim to match the existing casing or go flush.
- Stage 2 – Order and lead time (2 – 7 weeks, depends on spec). Impact assemblies aren’t stock items. You lock the glazing spec, hardware finish, and door style here. This is the longest stretch of the project and the one homeowners underestimate most.
- Stage 3 – Demo and prep (day 1 of install, per opening). We pull the old unit, inspect for rot in the sill and header, and sister any soft framing. On a pre-1906 Victorian that step can add half a day if the original rough opening was built by hand and out of square.
- Stage 4 – Set, flash, and seal (days 1 – 3). New unit gets shimmed, flashed at the head and sill, then sealed with a compatible sealant. Doors get the same treatment plus a check of the threshold and strike alignment.
- Stage 5 – Finish and walkthrough (final day). Interior and exterior trim, paint touch-up, hardware, screens, and a full operation test of every sash and slab. You sign off only when every unit closes, latches, and drains correctly.
Across the project you’re making real decisions at three points: spec at order, trim style at demo, and hardware finish before the final walkthrough. Everything else is ours to carry.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Impact product isn’t one thing. What you pick drives both the price and how the house behaves in a fog-heavy year.
- Glazing build-up. Laminated glass with a bonded interlayer holds together on impact – the true impact spec. Laminated-insulated units add thermal performance for a modest upcharge. Plain dual-pane does neither and shouldn’t be sold to you as impact glass.
- Frame material. Vinyl is the value play and holds up well in San Francisco’s mild range. Aluminum is thinner-sighted and suits modern openings but conducts cold. Wood-clad gives you a period-appropriate look on a Victorian and costs the most.
- Door systems. Entry slabs on a Therma-Tru platform balance cost and durability. Sliding and multi-panel systems open up the rear wall but drive up the number fast on wide openings.
- Brands we specify. We work with Mr-Glass and ViewLux for glazing assemblies where the spec calls for a true impact rating, and Therma-Tru for entry door slabs that hold up to coastal damp.
What Impact Windows & Doors Cost in San Francisco, CA
Whole-home impact window packages in San Francisco land between $9,440 and $29,500. That’s a real spread, and it comes down to a handful of variables.
| Cost driver | Effect on the number |
|---|---|
| Number of openings | Each unit adds roughly $800 – $1,800 of installed cost depending on size |
| Frame material | Vinyl at the low end, wood-clad at the top – often a 30 – 40% swing |
| Existing condition | Rotted sills or out-of-square openings add framing labor |
| Door systems | A single entry door adds $1,500 – $4,000 installed; sliders more |
| Permit scope | Full replacement pulls a permit; like-for-like swaps may not |
A written estimate from us itemizes glazing spec, frame material, hardware, trim, flashing, and permit fees line by line – no bundled “allowances” that balloon later. What it doesn’t cover: structural header replacement, stucco patching beyond the opening, and interior repaint outside the trim line. We flag those up front rather than surprise you mid-project.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
Rows of 1880s – 1920s wood-frame Victorians and Edwardians packed shoulder-to-shoulder on narrow lots in the Mission, Noe Valley, and the Haight are the stock we work in most, and that changes the job. Opening dimensions on these homes were hand-framed and rarely square, so every unit gets measured and shimmed individually. Coastal damp drives rot fast in exposed sills and headers, and the wet-season calendar means we schedule installs around rain, not heat. Seismic rules matter too: work that touches the soft-story garage or alters a historic façade can trigger Planning Department review, so we check scope against the building’s retrofit status before we order product. If your project also includes exterior fencing, homeowners often pair this with Aluminum Fence in San Francisco or Iron Fence in San Francisco to finish the yard in the same dry window.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in San Francisco
Most whole-home installations take three to five working days of on-site labor once materials arrive, though lead time on the product itself runs two to seven weeks. Call (833) 997-7759 to get a schedule against your actual openings.
Full replacement typically requires a permit, while like-for-like swaps in the same opening may not – the answer depends on your scope and the building’s age. We pull permits when the job needs them and walk you through inspection requirements before work starts.
Yes, in most cases – impact work replaces the glazing and slabs within the existing rough openings without touching plumbing or load-bearing structure. Structural header replacement or a widened opening pushes the job into framing territory and adds time and cost.
Whole-home packages run $9,440 to $29,500 depending on the number of openings, frame material, and door systems. Call (833) 997-7759 for an exact quote – estimates are free and itemized.
All impact window and door work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s in writing, on top of the manufacturer warranty on the units themselves.
If your scope grows beyond the openings, our Windows & Doors service and the full Windows & Doors in San Francisco page cover the wider project, and you can see everything we do across San Francisco.
Get Your Free Impact Windows & Doors Estimate
Call (833) 997-7759 to schedule a free on-site estimate for impact windows and doors in San Francisco. A live person answers around the clock, we measure every opening, and you leave the visit with a written, line-item quote and a clear spec. No pressure, no vague allowances – just the number you’ll actually pay, backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.