







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in South San Francisco: What It Takes and What It Costs
Impact windows and doors in South San Francisco usually run $9,440 to $29,500 for a typical whole-home package, with most single-family jobs landing in the middle of that range. Plan on two to four days of install once materials arrive, and six to ten weeks from signed contract to final inspection because impact-rated units are built to order. Call (833) 997-7759 for a free on-site estimate and a written line-item quote.
How the Job Actually Runs, Day by Day

Impact work is more sequenced than a standard window swap because every opening has to be measured, ordered to spec, and inspected against both the product’s rating and the framing details that make that rating hold. Here’s the real order of operations.
Stage 1: Site measure and opening survey (2 to 3 hours)
We measure every rough opening from inside and out, check sill heights and header loads, and note anything that will complicate the install. In South San Francisco’s older flatland housing that often means discovering a previous remodel that moved a header or furred out a wall. You get the real measurements before a single unit is ordered.
Stage 2: Product selection and order (you decide here)
You choose glass package, frame material, and whether any units open or stay fixed. We confirm which doors need multi-point locking and which windows need tempered glass where they fall within the required distance of a door or the floor. This is where most of the cost decision happens, and it’s also where lead time starts.
Stage 3: Permit filing and review (1 to 3 weeks)
Impact-rated product is a structural and safety substitution, so it gets permitted, not handshaked. Plans go in with the manufacturer’s product approval documentation attached. Review times shift with the city’s current workload. We don’t start demo until the permit is issued.
Stage 4: Removal and installation (1 to 2 days per elevation)
Interior trim comes off, old units come out, and openings get squared and flashed before the new unit drops in. We seal, shim, and fasten to the rated detail, then re-insulate and re-trim. Expect dust protection on floors and furniture, and expect to lose access to a room for part of a day.
Stage 5: Inspection, finish, and walkthrough (1 day)
The inspector signs off on fastening and product labels, then we finish the interior trim and touch-up. You walk the job with us, we test every opener and lock, and the written workmanship coverage starts from that date. It’s the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Impact ratings are only half the decision. The other half is how the units suit your house and your daily use. Here’s what actually gets picked between on South San Francisco jobs.
- Frame material: vinyl is the cost leader and the easiest to maintain, but it’s bulkier, so sightlines narrow on older homes. Aluminum holds a slimmer profile and takes a finish that matches original trim, at a premium. Wood-clad gives the most authentic look on pre-war housing and costs the most.
- Glass package: a laminated impact layer is the baseline. Adding a low-E coating cuts heat gain, which matters less on foggy mornings than on west-facing afternoon sun. Ask whether the unit carries a manufacturer’s impact rating you can put in a file, because insurance and resale both may want it.
- Openers versus fixed: casement and awning units seal tighter and vent well on the windward side; sliders take less floor clearance in a tight room. Fixed picture units cost the least per square foot and open nothing.
- Door hardware: multi-point locking and reinforced strike plates are the upgrade most worth taking. On townhomes and alley-loaded entries, that’s the visible security step, and it’s where impact doors differ most from a standard door.
- Finish and trim: interior casing profiles vary from stock to custom-milled. Matching an existing profile on a 1940s house usually adds cost; painting out a mismatch usually doesn’t.
What Impact Windows & Doors Cost in South San Francisco, CA

Expect $9,440 to $29,500 for a full impact window and door package on a typical South San Francisco home. A single entry door lands near the bottom of that range; a whole-house package with a sliding door and multi-point hardware sits near the top.
- Number and size of openings: the biggest driver. Every unit is priced individually, so a 12-opening house costs roughly double a 6-opening house.
- Existing condition: rot, out-of-square framing, or a previous unpermitted addition pushes labor up. Water-damaged sill framing is common in the fog belt.
- Access and staging: tight driveways, hillside lots, and street parking restrictions add crew hours. Alley-loaded townhome doors can need a different install approach entirely.
- Material grade: frame and glass upgrades move the number meaningfully; hardware and finish moves it modestly.
- Permit scope: a straightforward product substitution is one fee; anything that touches framing or egress is more review and more documentation.
A written estimate should list each opening, the unit spec, the trim allowance, permit fees, and the disposal cost. What it usually leaves out: structural repair if rot is found after demo, and repainting the interior wall around new trim. Ask for those as allowances up front so the final number doesn’t move. Upfront pricing is the whole point, and 0% financing for 18 months plus $1,000 off projects over $10,000 makes a full-house package easier to absorb.
See the difference
Before
After
Before
After
Before
AfterWhat South San Francisco Homes Specifically Do to This Job
The city runs two construction worlds side by side, and it shapes this work. A dense cluster of biotech manufacturing and logistics facilities means permits are processed by a building department used to code-heavy life-safety review, so a residential impact package gets read carefully, especially on any opening that changes egress. On the residential side, the flatlands west of the 101 hold a lot of mid-century and pre-war single-family homes where original framing is out of square and additions were sometimes unpermitted. That’s where we find the rot and the odd header. The higher-density infill along El Camino Real and near the Caltrain corridor brings townhomes and podium apartments where entry doors sit close to a neighbor, so multi-point hardware and tight seals matter more than window count. And the fog belt just south of San Francisco means cool, damp air and wind-driven rain, so flashing and sill detailing get more attention here than they would a few miles south. We cover all of South San Francisco, including the 94080 and 94083 ZIP codes, and for homeowners stretching the budget across several projects, our Windows & Doors service is the place to start the wider scope. Frequently this work also pairs with perimeter work like an Aluminum Fence in South San Francisco or an Iron Fence in South San Francisco, and it’s often part of a fuller Windows & Doors in South San Francisco project.
Serving South San Francisco, CA – Our Local Coverage Area
We serve South San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in South San Francisco

Installation itself is typically two to four days for a whole house, but total project time runs six to ten weeks because impact units are built to order and permits need review. Call (833) 997-7759 for a timeline estimate on your home.
Yes, impact-rated product is a safety and structural substitution and gets permitted in almost every case. We handle the filing and the inspection scheduling. Call (833) 997-7759 to ask what your specific job needs.
Usually yes, since the work is a same-opening replacement. If we find out-of-square framing or rot after demo, that’s a separate repair and we price it before proceeding. Call (833) 997-7759 to have those possibilities mapped into your estimate.
An impact-rated entry door with multi-point hardware typically falls at the low end of the $9,440 to $29,500 range, and a full package sits near the top. Call (833) 997-7759 for an exact quote, and keep in mind estimates are free.
Every install is covered by the 730-Day Done Right Promise on workmanship, on top of the manufacturer’s product warranty. If it’s not done right, we make it right. Call (833) 997-7759 to review the details for your project.
Get a Free Estimate on Impact Windows & Doors in South San Francisco
Call (833) 997-7759 and a live person answers, any hour, so you’re never stuck leaving a voicemail. We’ll set a free on-site visit, measure every opening, and hand you a written line-item quote with the permit fees and allowances spelled out. No pressure to sign that day. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and the 730-Day Done Right Promise backs the install.
Written by the team at Groundwork Construction Co.












