Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Burlingame, CA: What the Job Actually Involves
Sliding and patio doors in Burlingame cost most homeowners $3,200 to $11,500 per opening installed, with lead times of four to ten weeks depending on whether the door is a stock size or built to fit an existing rough opening in an older wall. A replacement slider in a standard opening is a two- to three-day job; a new patio door cut into a stub wall or a multi-panel system replacing a window unit runs closer to a week once inspection is scheduled. Call (833) 997-7759 for a free on-site estimate and a written, line-item number.
How We Sequence a Sliding or Patio Door Project
Burlingame’s housing stock is old enough that no two door openings behave the same way, so the sequence matters as much as the product. Here’s the order we work in and what you’ll be deciding along the way.
Stage 1: Site visit and rough-opening measurement (day 1)
We pull the trim and check what’s actually holding the wall: header sizing, jack studs, sheathing, and whether prior remodel layers have stacked up on the original framing. On Easton Addition homes this step regularly turns up a header that was sized for a 1950s aluminum slider and won’t carry a heavier multi-panel unit. You decide the door configuration and glazing package after we confirm the opening dimensions.
Stage 2: Product selection and order (days 1-10)
You choose frame material, glass specification, panel count, and hardware. This is the longest calendar stretch because custom-width sliders are built to order. We give you the lead time in writing before you commit. You’ll also decide here whether to add integrated blinds, a screen system, or smart-lock hardware.
Stage 3: Demo, framing, and weatherproofing prep (days 1-2 of install)
Old door out, opening reframed square, sill pan and flashing detailed before anything goes back in. This is the stage Burlingame’s damp morning air punishes if it’s rushed. We don’t skip the sill pan on wood-sided homes.
Stage 4: Door set, glazing, hardware, and finish (days 2-4)
The unit goes in, shimmed and plumbed, insulation packed, interior and exterior trim reinstalled. If you’re adding a smart lock or motorized shade, it’s wired and tested here.
Stage 5: Inspection and final walkthrough
Permitted work gets inspected, then we walk the door with you: operation, latch, screen travel, drainage. You sign off on the 730-Day Done Right Promise at that walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Almost every decision on a Burlingame patio door comes down to frame material and glass package. Here’s the honest trade-off on each.
- Vinyl sliders: Lowest cost, typically $3,200 to $6,000 installed. Good thermal performance. The profile is bulky, so it reads poorly on a Craftsman or Tudor elevation where the trim is thin.
- Fiberglass and aluminum-clad wood: $5,500 to $9,500. Fiberglass holds paint and resists moisture well in our fog belt; clad wood gives you real wood interior look with a low-maintenance exterior. This is the sweet spot for older Burlingame Park homes that need to look period-correct.
- Wood and carriage-house profiles: $8,000 to $11,500. Custom stile-and-rail detailing, divided lites, custom stain. This is what the higher-end remodels here ask for. It demands precision installation because there’s no hiding a racked frame behind wide vinyl trim.
- Multi-panel and lift-slide systems: Top of the range, sized to the opening. Best for homes adding a rear patio connection. Needs a properly sized header and usually structural review.
- Glass package: Tempered is required by code near a floor-level door. Low-E and impact-rated glazing are upgrades worth pricing separately – Mr-Glass and ECO Window Systems are two we specify regularly.
- Weather sealing and thresholds: The cheapest line item and the one that decides whether the door leaks in February. Specify a proper sill pan and a threshold with a positive weep path.
What Sliding & Patio Doors Cost in Burlingame, CA
Expect $3,200 to $11,500 per door for a typical Burlingame replacement, and budget $12,000 and up for a multi-panel or lift-slide system that requires header work. Five things push a job toward the high end:
- Opening size and configuration: A 6-foot two-panel slider is the low end. An 8- or 12-foot opening with three or more panels with structural header changes is the high end.
- Existing wall condition: Rot behind the trim, undersized headers, or stacked remodel layers all add framing time and material.
- Frame and finish grade: Vinyl to custom wood is roughly a $4,000 to $5,000 swing on the same opening.
- Permit scope: A like-for-like replacement may not require one, but a new opening, header change, or structural work does. We pull it and pass inspection.
- Add-ons: Smart locks, integrated blinds, screen systems, and interior trim matching.
Our written estimate lists the door, glass spec, hardware, framing, flashing, trim, disposal, and permit line by line. What it doesn’t cover – and what we tell you upfront – is hidden rot or code-upgrade work discovered after demo. If we find it, you get a change order with a number before anyone touches it. No surprise invoices.
See the difference
Before
After
Before
After
Before
AfterWhat Burlingame Homes Specifically Do to This Job
Burlingame Park, Easton Addition, and the downtown blocks are dominated by early-1900s through 1940s single-family homes, and that changes the door conversation. Original knob-and-tube-era wiring, raised foundations, and narrow side setbacks mean a rear patio door replacement is often the easiest path to a modern indoor-outdoor connection without touching the front elevation that design review scrutinizes. Because this is one of the Peninsula’s most architecturally protected suburbs, exterior alterations here go through design review – so a door swap that changes the visible profile, adds a new opening, or shifts the trim needs to be planned around that process rather than fought with. We build the design-review timeline into the schedule so your install doesn’t sit waiting on approval.
The climate matters too. Burlingame sits between the bay and the coastal hills, so cool fog-influenced summers and damp winters mean exterior detailing and flashing are the difference between a door that lasts and one that rots its own sill. We see it most on wood-sided homes where original thresholds were under-flashed. If you’re also refreshing the yard the patio door opens onto, homeowners often pair this with Paver Driveways in Burlingame or Fence Repair in Burlingame to finish the outdoor side of the project in one pass.
Opened walls in these neighborhoods regularly reveal stacked remodel layers on original framing. What looks like a door replacement can surface foundation bolting or shear upgrades on a home that predates modern seismic code. Our technicians have up to 12 years of experience reading those layers before demo starts, so we can tell you what’s likely and what we’ll price if it appears. When the patio door is part of a full Windows & Doors in Burlingame scope – say, replacing the rear slider alongside bedroom windows – we sequence it as one project, not two. Our Windows & Doors hub covers the wider scope, and we serve all of Burlingame and the surrounding Peninsula, including 94010 and 94011.
Questions We Get About Sliding & Patio Doors in Burlingame
How long does a sliding or patio door installation take in Burlingame?
Most replacements are done in two to three days of on-site work, with lead time of four to ten weeks for the door to arrive. Custom-width units and lift-slide systems take longer; we give you the lead time in writing before you order.
Do I need a permit for sliding & patio doors in Burlingame?
A like-for-like replacement in the same opening often doesn’t require one, but enlarging an opening, changing a header, or adding structural support does. We pull the permit and pass inspection as part of the job, and we’ll tell you which category your project falls into before work starts.
Can you replace a patio door without moving plumbing or structure?
Yes in most cases. A straight replacement uses the existing opening and leaves plumbing, wiring, and framing alone. The exception is when the existing header is undersized for the new unit – on older Easton Addition homes, that’s discovered at the site visit, not mid-install.
What does a patio door cost in Burlingame?
Replacement sliders run $3,200 to $6,000 for vinyl, $5,500 to $9,500 for fiberglass or clad wood, and $8,000 to $11,500 for custom wood and carriage-house profiles. Call (833) 997-7759 for an exact number on your opening – estimates are free.
What kind of warranty comes with the job?
All our sliding and patio door work is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after the job. The door manufacturer’s product warranty is separate and comes in writing at handoff.
Serving Burlingame, CA – Our Local Coverage Area
We serve Burlingame and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Get a Free Estimate on Sliding & Patio Doors in Burlingame
Call (833) 997-7759 for a free on-site estimate. A live person answers, day or night. We’ll measure the opening, flag any framing or weatherproofing concerns, and hand you a written line-item quote with the door, glass spec, labor, permit, and disposal broken out – no vague allowances, no pressure. If your Burlingame project qualifies over $10,000, the standing $1,000 off and 18-month 0% financing apply.
Written by the team at Groundwork Construction Co.